View GRM1555C1H2R3WA01D_6244309.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

cat.no.c02e-16 chip monolithic ceramic capacitors ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
1 2 3 4 5 6 7 part numbering 2 selection guide 6 chip monolithic ceramic capacitors for general purpose grm series 8 specifications and test methods 51 reference data 61 capacitor array gnm series 64 specifications and test methods 70 low esl lll/llr/lla/llm series 76 specifications and test methods 83 high-q type gjm series 87 specifications and test methods 97 high frequency gqm series 100 specifications and test methods 108 reference data 111 monolithic microchip gma series 112 specifications and test methods 115 for bonding gmd series 119 specifications and test methods 124 package 128 ! caution 132 notice 144 reference data 151 contents ! note ?please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. ?this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information for eu rohs compliant all the products in this catalog comply with eu rohs. eu rohs is "the european directive 2002/95/ec on the restriction of the use of certain hazardous substances in electrical and electronic equipment". for more details, please refer to our website 'murata's approach for eu rohs' (http://www.murata.com/info/rohs.html). ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
chip monolithic ceramic capacitors (medium voltage) for general purpose grm/grj series 1-1 low dissipation factor grm series 160 specifications and test methods 164 1-2 high capacitance for general use grm series 166 specifications and test methods 168 1-3 soft termination type grj series 171 specifications and test methods 173 only for applications 2-1 for lcd backlight inverter circuit grm/dc3.15kv series 176 specifications and test methods 177 2-2 for information devices gr4 series 179 specifications and test methods 180 2-3 for camera flash circuit gr7 series 183 specifications and test methods 184 ac250v type (which meet japanese law) ga2 series 187 specifications and test methods 188 safety standard certified ga3 series 4-1 ul, iec60384-14 class x1/y2 type gc 191 4-2 iec60384-14 class y2, x1/y2 type gf 192 4-3 iec60384-14 class y3 type gd 194 4-4 iec60384-14 class x2 type gb 195 specifications and test methods 196 reference data (typical example) 200 package 203 ! caution 206 notice 214 iso 9001 certifications 217 intro duction simsurfing 218 intro duction emicon-fun! 219 1 2 3 4 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. for general purpose grm/grj series only for applications ac250v type ga2 series safety standard certified ga3 series product information please check the murata home page (http://www.murata.com/) if you cannot find the part number in the catalog. ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. please check the murata home page (http://www.murata.com/) if you cannot find the part number in the catalog. (part number) w q product id w series chip monolithic ceramic capacitors gr gq gm gn ll gj ga j m 4 7 m a d m l r a m m 2 3 soft termination type tin plated layer only for information devices / tip & ring only for camera flash circuit high frequency for flow/reflow soldering monolithic microchip for bonding capacitor array low esl type controlled esr low esl type 8-termination low esl type 10-termination low esl type high frequency low loss type for ac250v (r.m.s.) safety standard certified type product id code series gr q m e 18 r 8 t b1 y 1h u 102 i k o a01 e dimensions (l g w) !0 d code 0.4 g 0.2mm 0.6 g 0.3mm 0.5 g 0.5mm 0.8 g 0.8mm 0.38 g 0.38mm 0.9 g 0.6mm 1.0 g 0.5mm 1.6 g 0.8mm 1.37 g 1.0mm 2.0 g 1.25mm 2.8 g 2.8mm 3.2 g 1.6mm 3.2 g 2.5mm 4.5 g 2.0mm 4.5 g 3.2mm 5.7 g 2.8mm 5.7 g 5.0mm dimensions (l g w) 01005 0201 0202 0303 015015 0302 0402 0603 0504 0805 1111 1206 1210 1808 1812 2211 2220 eia 02 03 05 08 0d 0m 15 18 1m 21 22 31 32 42 43 52 55 a b c d e f m n q r s x 1.0mm 1.25mm 1.6mm 2.0mm 2.5mm 3.2mm 1.15mm 1.35mm 1.5mm 1.8mm 2.8mm depends on individual standards. r dimension (t) (except gnm ) code 2 3 5 6 7 8 9 0.2mm 0.3mm 0.5mm 0.6mm 0.7mm 0.8mm 0.85mm dimension (t) r elements ( gnm only) code 2 4 2-elements 4-elements elements continued on the following page. o part numbering o part numbering 2 ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. please check the murata home page (http://www.murata.com/) if you cannot find the part number in the catalog. continued from the preceding page. continued on the following page. 25 to 85 c 25 to 85 c 25 to 85 c 25 to 125 c *6 -25 to 85 c -25 to 85 c -55 to 125 c -55 to 105 c -220 60ppm/ c -330 60ppm/ c -470 60ppm/ c -750 120ppm/ c 10% 10% 22% 22% r2h *1 s2h *1 t2h *1 u2j *1 b *2 b x7s x6s 6r 6s 6t 7u b1 b3 c7 c8 -55 to 125 c -55 to 125 c -55 to 125 c -55 to 125 c -25 to 85 c -25 to 85 c -55 to 125 c -55 to 105 c t temperature characteristics code temperature characteristic codes temperature characteristics 20 to 85 c 20 to 125 c 20 to 85 c 20 to 85 c 20 to 85 c 20 to 85 c 20 to 125 c 20 to 85 c 20 to 85 c 20 to 85 c 20 to 85 c 20 to 85 c 20 to 125 c 25 to 125 c 25 to 150 c 25 to 125 c 25 to 85 c 20 c 20 c 20 c 20 c 20 c 20 c 20 c 20 c 20 c 20 c 20 c 20 c 20 c 25 c 25 c 25 c 25 c temperature range reference temperature +350 to -1000ppm/ c 0 60ppm/ c -150 60ppm/ c -220 60ppm/ c -330 60ppm/ c -470 60ppm/ c 0 120ppm/ c -150 120ppm/ c -220 120ppm/ c -330 120ppm/ c -470 120ppm/ c -750 120ppm/ c 0 250ppm/ c 0 30ppm/ c 0 30ppm/ c 0 60ppm/ c -150 60ppm/ c capacitance change or temperature coefficient sl *1 ch *1 ph *1 rh *1 sh *1 th *1 cj *1 pj *1 rj *1 sj *1 tj *1 uj *1 ck *1 c0g *1 x8g *1 c0h *1 p2h *1 jis jis jis jis jis jis jis jis jis jis jis jis jis eia eia eia eia 25 c 25 c 25 c 25 c 20 c 20 c 25 c 25 c eia eia eia eia jis jis eia eia -25 to 85 c -30 to 85 c -55 to 150 c -55 to 125 c -55 to 125 c -55 to 85 c -55 to 125 c -55 to 150 c -55 to 125 c +30, -80% +22, -82% +15, -40% 15% 15% 15% 15% 15% 10% *4 +22, -33% *5 f *2 y5v x8l r *2 r x5r x7r x8r - f1 f5 l8 r1 r3 r6 r7 r9 w0 -25 to 85 c -30 to 85 c -55 to 150 c -55 to 125 c -55 to 125 c -55 to 85 c -55 to 125 c -55 to 150 c -55 to 125 c 20 c 25 c 25 c 20 c 20 c 25 c 25 c 25 c 25 c jis eia *3 jis jis eia eia eia - -55 to 125 c +22, -33% x7t d7 -55 to 125 c 25 c eia -55 to 105 c +22, -33% x6t d8 -55 to 105 c 25 c eia -55 to 125 c +22, -56% x7u e7 -55 to 125 c 25 c eia public std code 1x 2c 2p 2r 2s 2t 3c 3p 3r 3s 3t 3u 4c 5c 5g 6c 6p -55 to 125 c -55 to 125 c -25 to 85 c -25 to 85 c -25 to 85 c -25 to 85 c -55 to 125 c -25 to 85 c -25 to 85 c -25 to 85 c -25 to 85 c -25 to 85 c -55 to 125 c -55 to 125 c -55 to 150 c -55 to 125 c -55 to 125 c operating temperature range *1 please refer to table for capacitance change under reference temperature. *2 capacitance change is specified with 50% rated voltage applied. *3 murata temperature characteristic code. *4 apply dc350v bias. *5 no dc bias. *6 rated voltage 100vdc max : 25 to 85 c 3 ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. please check the murata home page (http://www.murata.com/) if you cannot find the part number in the catalog. continued from the preceding page. murata code capacitance change from 25 c (%) e55 c e30 c e10 c max. min. max. min. max. min. 5c/5g 0.58 ?.24 0.40 ?.17 0.25 ?.11 6c 0.87 ?.48 0.59 ?.33 0.38 ?.21 6p 2.33 0.72 1.61 0.50 1.02 0.32 6r 3.02 1.28 2.08 0.88 1.32 0.56 6s 4.09 2.16 2.81 1.49 1.79 0.95 6t 5.46 3.28 3.75 2.26 2.39 1.44 7u 8.78 5.04 6.04 3.47 3.84 2.21 eia code 4c 2.56 ?.88 1.54 ?.13 1.02 ?.75 3p 1.65 0.14 1.10 0.09 3r 2.03 0.45 1.35 0.30 3s 2.63 0.95 1.76 0.63 3t 3.40 1.58 2.27 1.05 3u 4.94 2.84 3.29 1.89 3c 1.37 ?.90 0.82 ?.54 0.55 ?.36 murata code capacitance change from 20 c (%) e55 c e25 c e10 c max. min. max. min. max. min. 2c 0.82 ?.45 0.49 ?.27 0.33 ?.18 2p 1.32 0.41 0.88 0.27 2r 1.70 0.72 1.13 0.48 2s 2.30 1.22 1.54 0.81 2t 3.07 1.85 2.05 1.23 1x o capacitance change from each temperature jis code u capacitance expressed by three-digit alphanumerics. the unit is picofarad (pf). the first and second figures are significant digits, and the third figure expresses the number of zeros which follow the two numbers.if there is a decimal point, it is expressed by the capital letter " r ." in this case, all figures are significant digits. r50 1r0 100 103 ex.) 0.5pf 1.0pf 10pf 10000pf code capacitance y rated voltage 0e 0g 0j 1a 1c 1e ya 1h 2a 2d 2e yd 2h 2j 3a 3d 3f bb e2 gc gf gd gb dc2.5v dc4v dc6.3v dc10v dc16v dc25v dc35v dc50v dc100v dc200v dc250v dc300v dc500v dc630v dc1kv dc2kv dc3.15kv dc350v (for camera flash circuit) ac250v x1/y2; ac250v (safety standard certified type gc) y2, x1/y2; ac250v (safety standard certified type gf) y3; ac250v (safety standard certified type gd) x2; ac250v (safety standard certified type gb) code rated voltage continued on the following page. 4 ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. please check the murata home page (http://www.murata.com/) if you cannot find the part number in the catalog. continued from the preceding page. expressed by three figures. o individual specification code (except llr ) i capacitance tolerance code w grm/gjm series c ? tc 0.05pf capacitance tolerance v 9.9pf 0.1pf b grm/gjm gqm c ? 0.1pf v 9.9pf v 1pf 1.1 to 9.9pf 0.1pf 0.1pf 1pf step and e24 series c grm/gjm grm gqm c ? except c ? c ? 0.25pf v 9.9pf v 5pf v 1pf 1.1 to 9.9pf 0.1pf * 1pf 0.1pf 1pf step and e24 series d grm/gjm grm gqm c ? except c ? c ? 0.5pf 5.1 to 9.9pf 5.1 to 9.9pf 5.1 to 9.9pf 0.1pf * 1pf 1pf step and e24 series g gjm gqm c ? c ? 2% u 10pf u 10pf e12 series e24 series j grm/ga3 gqm/gjm c ? , sl, u2j c ? 5% u 10pf u 10pf e12 series e24 series capacitance step k grj/grm/gr7/ga3 gnm gr4, gmd b, r, x7r, x5r, zlm c0g b, r, x7r, x5r, zlm 10% e6 series e6 series e12 series m grm/gma gnm ga2 lll/llr/lla/llm b, r, x7r, x7s x5r, x7r, x7s x7r x5r, x7r, x7s, x6s 20% e6 series e3 series e3 series e3 series z grm f, y5v +80%, -20% e3 series r depends on individual standards. * e24 series is also available. o esr ( llr only) code e01 e03 e05 e07 100m 220m 470m 1000m esr !0 packaging code l d e k j f b c t ?80mm embossed taping ?80mm paper taping ?80mm paper taping (lll15) ?30mm embossed taping ?30mm paper taping ?30mm paper taping (lll15) bulk bulk case bulk tray packaging 5 ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
selection guide for chip monolithic ceramic capacitors 6 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. applications?
for general purpose grm series 8 specifications and test methods 51 reference data 61 capacitor array gnm series 64 specifications and test methods 70 low esl lll/llr/lla/llm series 76 specifications and test methods 83 high-q type gjm series 87 specifications and test methods 97 high frequency gqm series 100 specifications and test methods 108 reference data 111 monolithic microchip gma series 112 specifications and test methods 115 for bonding gmd series 119 specifications and test methods 124 package 128 ! caution 132 notice 144 reference data 151 chip monolithic ceramic capacitors 1 2 3 4 5 6 7 for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information ! note ?please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. ?this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
8 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. chip monolithic ceramic capacitors for general purpose grm series n features 1. higher resistance of solder-leaching due to the ni-barriered termination, applicable for reflow-soldering, and flow-soldering (grm18/21/31 type only). 2. the grm series is a lead free product. 3. smaller size and higher capacitance value. 4. high reliability and no polarity. 5. excellent pulse response and noise reduction due to the low impedance at high frequency. 6. the grm series is available in paper or embossed tape and reel packaging for automatic placement. bulk case packaging is also available for grm15/ 18/21(t=0.6,1.25). 7. ta replacement. n applications general electronic equipment part number lw t dimensions (mm) e g min. 0.4 0.02 0.6 0.03 1.0 0.05 1.6 0.1 2.0 0.1 3.2 0.15 3.2 0.2 3.2 0.3 0.2 0.02 0.3 0.03 0.5 0.05 0.8 0.1 1.25 0.1 1.6 0.15 1.6 0.2 2.5 0.2 0.2 0.02 0.3 0.03 0.25 0.05 0.3 0.03 0.5 0.05 0.5 +0/-0.1 0.8 0.1 0.6 0.1 0.85 0.1 1.0 +0/-0.2 1.25 0.1 0.6 0.1 0.85 0.1 1.15 0.1 1.6 0.2 0.85 +0.15/-0.05 1.0 +0/-0.2 1.15 0.1 1.35 0.15 1.6 0.2 1.8 0.2 2.0 0.2 2.5 0.2 0.07 to 0.14 0.1 to 0.2 0.1 to 0.3 0.15 to 0.35 0.2 to 0.5 0.2 to 0.7 0.3 to 0.8 0.3 min. 0.13 0.2 0.4 0.3 0.5 0.7 1.5 1.0 * bulk case: 1.6 0.07(l) g 0.8 0.07(w) g 0.8 0.07(t) the figures indicate typical specification. grm022 grm033 grm15x grm153 grm155 grm185 grm188* grm216 grm219 grm21a grm21b grm316 grm319 grm31m grm31c grm329 grm32a grm32m grm32n grm32c grm32r grm32d grm32e l t w e e g for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
capacitance table 9 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. continued on the following page. temperature compensating type c0g(5c),u2j(7u) characteristics 16 ( 1c ) 6 ex.6: t dimension [mm] lxw [mm] rated voltage [vdc] capacitance 0.4x0.2 ( 02 ) <01005> 10 ( 1a ) 6.3 ( 0j ) 0.6x0.3 ( 03 ) <0201> 50 ( 1h ) 1.0x0.5 ( 15 ) <0402> 50 ( 1h ) 1.6x0.8 ( 18 ) <0603> 100 ( 1e ) 50 ( 1h ) 2.0x1.25 ( 21 ) <0805> 100 ( 1e ) 50 ( 1h ) 3.2x1.6 ( 31 ) <1206> 100 ( 1e ) 50 ( 1h ) 0.6x0.3 ( 03 ) <0201> 50 ( 1h ) 25 ( 1e ) 1.0x0.5 ( 15 ) <0402> 50 ( 1h ) 10 ( 1a ) 1.6x0.8 ( 18 ) <0603> 50 ( 1h ) 10 ( 1a ) 2.0x1.25 ( 21 ) <0805> 50 ( 1h ) 10 ( 1a ) 3.2x1.6 ( 31 ) <1206> 50 ( 1h ) tc c0g( 5c ) u2j( 7u ) 0.1pf( r10 ) 0.2pf( r20 ) 0.3pf( r30 ) 0.4pf( r40 ) 0.5pf( r50 ) 0.6pf( r60 ) 0.7pf( r70 ) 0.8pf( r80 ) 0.9pf( r90 ) 1.0pf( 1r0 ) 1.1pf( 1r1 ) 1.2pf( 1r2 ) 1.3pf( 1r3 ) 1.4pf( 1r4 ) 1.5pf( 1r5 ) 1.6pf( 1r6 ) 1.7pf( 1r7 ) 1.8pf( 1r8 ) 1.9pf( 1r9 ) 2.0pf( 2r0 ) 2.1pf( 2r1 ) 2.2pf( 2r2 ) 2.3pf( 2r3 ) 2.4pf( 2r4 ) 2.5pf( 2r5 ) 2.6pf( 2r6 ) 2.7pf( 2r7 ) 2.8pf( 2r8 ) 2.9pf( 2r9 ) 3.0pf( 3r0 ) 3.1pf( 3r1 ) 3.2pf( 3r2 ) 3.3pf( 3r3 ) 3.4pf( 3r4 ) 3.5pf( 3r5 ) 3.6pf( 3r6 ) 3.7pf( 3r7 ) 3.8pf( 3r8 ) 3.9pf( 3r9 ) 4.0pf( 4r0 ) 4.1pf( 4r1 ) 4.2pf( 4r2 ) 4.3pf( 4r3 ) 4.4pf( 4r4 ) 4.5pf( 4r5 ) 4.6pf( 4r6 ) 4.7pf( 4r7 ) 4.8pf( 4r8 ) 4.9pf( 4r9 ) 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3, 5 3, 5 3, 5 3, 5 3, 5 3, 5 3, 5 3, 5 3, 5 3, 5 3, 5 3, 5 3, 5 3, 5 3, 5 3, 5 3, 5 3, 5 3, 5 3, 5 3, 5 3, 5 3, 5 3, 5 3, 5 3, 5 3, 5 3, 5 3, 5 3, 5 3, 5 3, 5 3, 5 3, 5 3, 5 3, 5 3, 5 3, 5 3, 5 3, 5 3, 5 3, 5 3, 5 3, 5 3, 5 3, 5 3, 5 3, 5 3, 5 3 3 3 3 5 5 5 5 the part number code is shown in ( ) and unit is shown in [ ]. < >: eia [inch] code for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
capacitance table 10 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. continued from the preceding page. continued on the following page. 16 ( 1c ) 6 ex.6: t dimension [mm] lxw [mm] rated voltage [vdc] capacitance 0.4x0.2 ( 02 ) <01005> 10 ( 1a ) 6.3 ( 0j ) 0.6x0.3 ( 03 ) <0201> 50 ( 1h ) 1.0x0.5 ( 15 ) <0402> 50 ( 1h ) 1.6x0.8 ( 18 ) <0603> 100 ( 1e ) 50 ( 1h ) 2.0x1.25 ( 21 ) <0805> 100 ( 1e ) 50 ( 1h ) 3.2x1.6 ( 31 ) <1206> 100 ( 1e ) 50 ( 1h ) 0.6x0.3 ( 03 ) <0201> 50 ( 1h ) 25 ( 1e ) 1.0x0.5 ( 15 ) <0402> 50 ( 1h ) 10 ( 1a ) 1.6x0.8 ( 18 ) <0603> 50 ( 1h ) 10 ( 1a ) 2.0x1.25 ( 21 ) <0805> 50 ( 1h ) 10 ( 1a ) 3.2x1.6 ( 31 ) <1206> 50 ( 1h ) tc c0g( 5c ) u2j( 7u ) 5.0pf( 5r0 ) 5.1pf( 5r1 ) 5.2pf( 5r2 ) 5.3pf( 5r3 ) 5.4pf( 5r4 ) 5.5pf( 5r5 ) 5.6pf( 5r6 ) 5.7pf( 5r7 ) 5.8pf( 5r8 ) 5.9pf( 5r9 ) 6.0pf( 6r0 ) 6.1pf( 6r1 ) 6.2pf( 6r2 ) 6.3pf( 6r3 ) 6.4pf( 6r4 ) 6.5pf( 6r5 ) 6.6pf( 6r6 ) 6.7pf( 6r7 ) 6.8pf( 6r8 ) 6.9pf( 6r9 ) 7.0pf( 7r0 ) 7.1pf( 7r1 ) 7.2pf( 7r2 ) 7.3pf( 7r3 ) 7.4pf( 7r4 ) 7.5pf( 7r5 ) 7.6pf( 7r6 ) 7.7pf( 7r7 ) 7.8pf( 7r8 ) 7.9pf( 7r9 ) 8.0pf( 8r0 ) 8.1pf( 8r1 ) 8.2pf( 8r2 ) 8.3pf( 8r3 ) 8.4pf( 8r4 ) 8.5pf( 8r5 ) 8.6pf( 8r6 ) 8.7pf( 8r7 ) 8.8pf( 8r8 ) 8.9pf( 8r9 ) 9.0pf( 9r0 ) 9.1pf( 9r1 ) 9.2pf( 9r2 ) 9.3pf( 9r3 ) 9.4pf( 9r4 ) 9.5pf( 9r5 ) 9.6pf( 9r6 ) 9.7pf( 9r7 ) 9.8pf( 9r8 ) 9.9pf( 9r9 ) 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3, 5 3, 5 3, 5 3, 5 3, 5 3, 5 3, 5 3, 5 3, 5 3, 5 3, 5 3, 5 3, 5 3, 5 3, 5 3, 5 3, 5 3, 5 3, 5 3, 5 3, 5 3, 5 3, 5 3, 5 3, 5 3, 5 3, 5 3, 5 3, 5 3, 5 3, 5 3, 5 3, 5 3, 5 3, 5 3, 5 3, 5 3, 5 3, 5 3, 5 3, 5 3, 5 3, 5 3, 5 3, 5 3, 5 3, 5 3, 5 3, 5 3, 5 3 3 3 3 3 5 5 5 5 5 the part number code is shown in ( ) and unit is shown in [ ]. < >: eia [inch] code for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
capacitance table 11 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. continued from the preceding page. 10pf( 100 ) 12pf( 120 ) 15pf( 150 ) 18pf( 180 ) 22pf( 220 ) 27pf( 270 ) 33pf( 330 ) 39pf( 390 ) 47pf( 470 ) 56pf( 560 ) 68pf( 680 ) 82pf( 820 ) 100pf( 101 ) 120pf( 121 ) 150pf( 151 ) 180pf( 181 ) 220pf( 221 ) 270pf( 271 ) 330pf( 331 ) 390pf( 391 ) 470pf( 471 ) 560pf( 561 ) 680pf( 681 ) 820pf( 821 ) 1000pf( 102 ) 1200pf( 122 ) 1500pf( 152 ) 1800pf( 182 ) 2200pf( 222 ) 2700pf( 272 ) 3300pf( 332 ) 3900pf( 392 ) 4700pf( 472 ) 5600pf( 562 ) 6800pf( 682 ) 8200pf( 822 ) 10000pf( 103 ) 12000pf( 123 ) 15000pf( 153 ) 18000pf( 183 ) 22000pf( 223 ) 27000pf( 273 ) 33000pf( 333 ) 39000pf( 393 ) 47000pf( 473 ) 56000pf( 563 ) 68000pf( 683 ) 82000pf( 823 ) 0.1 f( 104 ) the part number code is shown in ( ) and unit is shown in [ ]. < >: eia [inch] code 16 ( 1c ) 6 ex.6: t dimension [mm] lxw [mm] rated voltage [vdc] capacitance 0.4x0.2 ( 02 ) <01005> 10 ( 1a ) 6.3 ( 0j ) 0.6x0.3 ( 03 ) <0201> 50 ( 1h ) 1.0x0.5 ( 15 ) <0402> 50 ( 1h ) 1.6x0.8 ( 18 ) <0603> 100 ( 1e ) 50 ( 1h ) 2.0x1.25 ( 21 ) <0805> 100 ( 1e ) 50 ( 1h ) 3.2x1.6 ( 31 ) <1206> 100 ( 1e ) 50 ( 1h ) 0.6x0.3 ( 03 ) <0201> 50 ( 1h ) 25 ( 1e ) 1.0x0.5 ( 15 ) <0402> 50 ( 1h ) 10 ( 1a ) 1.6x0.8 ( 18 ) <0603> 50 ( 1h ) 10 ( 1a ) 2.0x1.25 ( 21 ) <0805> 50 ( 1h ) 10 ( 1a ) 3.2x1.6 ( 31 ) <1206> 50 ( 1h ) tc c0g( 5c ) u2j( 7u ) 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 3 3 3 3 3 3 3 3 3 3 3 3 3 3, 5 3, 5 3, 5 3, 5 3, 5 3, 5 3, 5 3, 5 3, 5 3, 5 3, 5 3, 5 3, 5 3, 5 3, 5 3, 5 3, 5 3, 5 3, 5 3, 5 3, 5 3, 5 3, 5 5 5 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 9 9 9 9 9 9 b b 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 m m c c c 3 3 3 3 3 3 3 3 3 3 3 3 3 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 8 8 8 8 5, 8 5, 8 5, 8 5, 8 5, 8 8 8 8 8 5 5 5 5 8 8 8 8 6 6 6 6 9 9 a b b 9 m m m 9 b b b for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
capacitance table 12 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. temperature compensating type p2h(6p),r2h(6r),s2h(6s),t2h(6t) characteristics 50 ( 1h ) 6 ex.6: t dimension [mm] lxw [mm] rated voltage [vdc] capacitance 1.0pf( 1r0 ) 2.0pf( 2r0 ) 3.0pf( 3r0 ) 4.0pf( 4r0 ) 5.0pf( 5r0 ) 6.0pf( 6r0 ) 7.0pf( 7r0 ) 8.0pf( 8r0 ) 9.0pf( 9r0 ) 10pf( 100 ) 12pf( 120 ) 15pf( 150 ) 18pf( 180 ) 22pf( 220 ) 27pf( 270 ) 33pf( 330 ) 39pf( 390 ) 47pf( 470 ) 56pf( 560 ) 68pf( 680 ) 82pf( 820 ) 100pf( 101 ) the part number code is shown in ( ) and unit is shown in [ ]. < >: eia [inch] code 25 ( 1e ) 0.6x0.3 ( 03 ) <0201> 50 ( 1h ) 1.0x0.5 ( 15 ) <0402> 25 ( 1e ) 50 ( 1h ) 25 ( 1e ) 50 ( 1h ) 1.0x0.5 ( 15 ) <0402> 0.6x0.3 ( 03 ) <0201> 1.0x0.5 ( 15 ) <0402> 0.6x0.3 ( 03 ) <0201> 1.0x0.5 ( 15 ) <0402> tc p2h ( 6p ) r2h ( 6r ) s2h ( 6s ) t2h ( 6t ) 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
capacitance table 13 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. continued from the preceding page. continued on the following page. high dielectric constant type x7r(r7)/x7s(c7)/x7t(d7)/x7u(e7) characteristics 0.4x0.2 ( 02 ) <01005> 0.6x0.3 ( 03 ) <0201> 1.0x0.5 ( 15 ) <0402> 1.6x0.8 ( 18 ) <0603> 10 ( 1a ) 5 ex.5: t dimension [mm] lxw [mm] rated voltage [vdc] capacitance 68pf( 680 ) 100pf( 101 ) 150pf( 151 ) 220pf( 221 ) 330pf( 331 ) 470pf( 471 ) 680pf( 681 ) 1000pf( 102 ) 1500pf( 152 ) 2200pf( 222 ) 3300pf( 332 ) 4700pf( 472 ) 6800pf( 682 ) 10000pf( 103 ) 15000pf( 153 ) 22000pf( 223 ) 33000pf( 333 ) 47000pf( 473 ) 68000pf( 683 ) 0.10 f( 104 ) 0.15 f( 154 ) 0.22 f( 224 ) 0.33 f( 334 ) 0.47 f( 474 ) 0.68 f( 684 ) 1.0 f( 105 ) 2.2 f( 225 ) the part number code is shown in ( ) and unit is shown in [ ]. < >: eia [inch] code 25 ( 1e ) 16 ( 1c ) 10 ( 1a ) 6.3 ( 0j ) 100 ( 2a ) 50 ( 1h ) 25 ( 1e ) 16 ( 1c ) 10 ( 1a ) 100 ( 2a ) 50 ( 1h ) 25 ( 1e ) 16 ( 1c ) 10 ( 1a ) 6.3 ( 0j ) 4 ( 0g ) 2 2 2 2 2 2 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 5 5 5 5 5 5 5 5 5 x, 5 x, 5 x, 5 x, 5 x, 5 x, 5 5 5 5 5 5 5 5 x 5 5 5 5 5 5 5 x x x x 5 5 5 5 5 5 5 5 5 5 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 5, 8 888 for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
capacitance table 14 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. continued from the preceding page. high dielectric constant type x6s(c8)/x6t(d8) characteristics 0.6x0.3 ( 03 ) <0201> 1.0x0.5 ( 15 ) <0402> 6.3 ( 0j ) 4 ( 0g ) 5 ex.5: t dimension [mm] lxw [mm] rated voltage [vdc] capacitance 15000pf( 153 ) 22000pf( 223 ) 33000pf( 333 ) 47000pf( 473 ) 68000pf( 683 ) 0.10 f( 104 ) 0.15 f( 154 ) 0.22 f( 224 ) 0.33 f( 334 ) 0.47 f( 474 ) 0.68 f( 684 ) 25 ( 1e ) 6.3 ( 0j ) 4 ( 0g ) 3 3 3 3 3 3 3 3 5 5 5 5 5 5 5 # 5 5 5 5 5 1.6x0.8 ( 18 ) <0603> 2.0x1.25 ( 21 ) <0805> 3.2x1.6 ( 31 ) <1206> lxw [mm] rated voltage [vdc] capacitance 1.0 f( 105 ) 2.2 f( 225 ) 4.7 f( 475 ) 10 f( 106 ) 22 f( 226 ) 47 f( 476 ) 100 f( 107 ) the part number code is shown in ( ) and unit is shown in [ ]. < >: eia [inch] code # these part numbers have individual testing conditions on durability of grm series specifications and test methods (2). please refer to p60. 10 ( 1a ) 25 ( 1e ) 6.3 ( 0j ) 4 ( 0g ) 25 ( 1e ) 16 ( 1c ) 10 ( 1a ) 6.3 ( 0j ) 4 ( 0g ) 25 ( 1e ) 16 ( 1c ) 10 ( 1a ) 6.3 ( 0j ) 4 ( 0g ) 2.5 ( 0e ) 5 8 85 8 8 8 # b 8 6 9 b9 b 9 9, b b # b c 6 9 m9 c 9 c cc c 3.2x2.5 ( 32 ) <1210> 25 ( 1e ) 10 ( 1a ) 6.3 ( 0j ) 4 ( 0g ) d en ee ee the part number code is shown in ( ) and unit is shown in [ ]. < >: eia [inch] code # these part numbers have individual testing conditions on durability of grm series specifications and test methods (2). please refer to p60. 3.2x1.6 ( 31 ) <1206> 3.2x2.5 ( 32 ) <1210> lxw [mm] rated voltage [vdc] capacitance 6800pf( 682 ) 10000pf( 103 ) 15000pf( 153 ) 22000pf( 223 ) 33000pf( 333 ) 47000pf( 473 ) 68000pf( 683 ) 0.10 f( 104 ) 0.15 f( 154 ) 0.22 f( 224 ) 0.33 f( 334 ) 0.47 f( 474 ) 0.68 f( 684 ) 1.0 f( 105 ) 2.2 f( 225 ) 4.7 f( 475 ) 10 f( 106 ) 22 f( 226 ) 47 f( 476 ) 100 f( 107 ) 100 ( 2a ) 50 ( 1h ) 25 ( 1e ) 16 ( 1c ) 10 ( 1a ) 6.3 ( 0j ) 4 ( 0g ) 100 ( 2a ) 50 ( 1h ) 35 ( ya ) 25 ( 1e ) 16 ( 1c ) 10 ( 1a ) 6.3 ( 0j ) 4 ( 0g ) 9 b b b b b a a b 9 b b b b b 9 b b 9 b b b b 9 9 9, b b 9 b b b b b bb b 9 m m m m 9 m m m m c m m 9 m m m c c 9 9 9 m c c m 9 # , c cc cc c c c e e e d eee ee e 2.0x1.25 ( 21 ) <0805> 100 ( 2a ) 50 ( 1h ) 25 ( 1e ) 16 ( 1c ) 10 ( 1a ) 6.3 ( 0j ) 4 ( 0g ) for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
capacitance table 15 ! note ?please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. ?this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. continued from the preceding page. continued on the following page. high dielectric constant type x5r(r6) characteristics 0.4x0.2 ( 02 ) <01005> 0.6x0.3 ( 03 ) <0201> 1.0x0.5 ( 15 ) <0402> 1.6x0.8 ( 18 ) <0603> 10 ( 1a ) 6.3 ( 0j ) 25 ( 1e ) 16 ( 1c ) 10 ( 1a ) 6.3 ( 0j ) 100 ( 2a ) 50 ( 1h ) 25 ( 1e ) 16 ( 1c ) 10 ( 1a ) 6.3 ( 0j ) 100 ( 2a ) 50 ( 1h ) 25 ( 1e ) 16 ( 1c ) 10 ( 1a ) 6.3 ( 0j ) 4 ( 0g ) 5 ex.5: t dimension [mm] : please refer to x7r(r7) etc. characteristics. lxw [mm] rated voltage [vdc] capacitance 68pf( 680 ) 100pf( 101 ) 150pf( 151 ) 220pf( 221 ) 330pf( 331 ) 470pf( 471 ) 680pf( 681 ) 1000pf( 102 ) 1500pf( 152 ) 2200pf( 222 ) 3300pf( 332 ) 4700pf( 472 ) 6800pf( 682 ) 10000pf( 103 ) 15000pf( 153 ) 22000pf( 223 ) 33000pf( 333 ) 47000pf( 473 ) 68000pf( 683 ) 0.10 f( 104 ) 0.15 f( 154 ) 0.22 f( 224 ) 0.33 f( 334 ) 0.47 f( 474 ) 0.68 f( 684 ) 1.0 f( 105 ) 2.2 f( 225 ) 4.7 f( 475 ) 10 f( 106 ) 22 f( 226 ) the part number code is shown in ( ) and unit is shown in [ ]. < >: eia [inch] code 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 3 3 3 3 3 33 3 3 3 3 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 8 8 8 8 8 8 8 8 8 8 8 5, 8 8 8 5 8 8 88 8 for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. continued from the preceding page. capacitance table 16 2.0x1.25 ( 21 ) <0805> 3.2x1.6 ( 31 ) <1206> 3.2x2.5 ( 32 ) <1210> 100 ( 2a ) 50 ( 1h ) 25 ( 1e ) 16 ( 1c ) 10 ( 1a ) 6.3 ( 0j ) 4 ( 0g ) 100 ( 2a ) 50 ( 1h ) 25 ( 1e ) 16 ( 1c ) 10 ( 1a ) 6.3 ( 0j ) 4 ( 0g ) 100 ( 2a ) 50 ( 1h ) 35 ( ya ) 25 ( 1e ) 16 ( 1c ) 10 ( 1a ) 6.3 ( 0j ) lxw [mm] rated voltage [vdc] capacitance 6800pf( 682 ) 10000pf( 103 ) 15000pf( 153 ) 22000pf( 223 ) 33000pf( 333 ) 47000pf( 473 ) 68000pf( 683 ) 0.10 f( 104 ) 0.15 f( 154 ) 0.22 f( 224 ) 0.33 f( 334 ) 0.47 f( 474 ) 0.68 f( 684 ) 1.0 f( 105 ) 2.2 f( 225 ) 4.7 f( 475 ) 10 f( 106 ) 22 f( 226 ) 47 f( 476 ) 100 f( 107 ) the part number code is shown in ( ) and unit is shown in [ ]. < >: eia [inch] code 4 ( 0g ) 6 9, b b 6, b 9, b 9, b b b 9, b 9, b b 9, b b9 c6 9,c c 9,c 9, c c 9 c c c c cc ed e ee e for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
17 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. the part number code is shown in ( ) and unit is shown in [ ]. < >: eia [inch] code lxw [mm] rated volt. [vdc] capacitance tolerance part number 16( 1c ) grm0225c1cr20wd05l grm0225c1cr20bd05l grm0225c1cr30wd05l grm0225c1cr30bd05l grm0225c1cr40wd05l grm0225c1cr40bd05l grm0225c1cr50wd05l grm0225c1cr50bd05l grm0225c1cr60wd05l grm0225c1cr60bd05l grm0225c1cr70wd05l grm0225c1cr70bd05l grm0225c1cr80wd05l grm0225c1cr80bd05l grm0225c1cr90wd05l grm0225c1cr90bd05l grm0225c1c1r0wd05l grm0225c1c1r0bd05l grm0225c1c1r0cd05l grm0225c1c1r1wd05l grm0225c1c1r1bd05l grm0225c1c1r1cd05l grm0225c1c1r2wd05l grm0225c1c1r2bd05l grm0225c1c1r2cd05l grm0225c1c1r3wd05l grm0225c1c1r3bd05l grm0225c1c1r3cd05l grm0225c1c1r4wd05l grm0225c1c1r4bd05l grm0225c1c1r4cd05l grm0225c1c1r5wd05l grm0225c1c1r5bd05l grm0225c1c1r5cd05l grm0225c1c1r6wd05l grm0225c1c1r6bd05l grm0225c1c1r6cd05l grm0225c1c1r7wd05l grm0225c1c1r7bd05l grm0225c1c1r7cd05l grm0225c1c1r8wd05l grm0225c1c1r8bd05l grm0225c1c1r8cd05l grm0225c1c1r9wd05l grm0225c1c1r9bd05l grm0225c1c1r9cd05l 50( 1h ) grm0335c1hr10wd01d grm0335c1hr10bd01d grm0335c1hr20wd01d grm0335c1hr20bd01d grm0335c1hr30wd01d grm0335c1hr30bd01d grm0335c1hr40wd01d grm0335c1hr40bd01d grm0335c1hr50wd01d grm0335c1hr50bd01d grm0335c1hr60wd01d grm0335c1hr60bd01d grm0335c1hr70wd01d grm0335c1hr70bd01d grm0335c1hr80wd01d grm0335c1hr80bd01d grm0335c1hr90wd01d grm0335c1hr90bd01d grm0335c1h1r0wd01d grm0335c1h1r0bd01d grm0335c1h1r0cd01d grm0335c1h1r1wd01d grm0335c1h1r1bd01d grm0335c1h1r1cd01d grm0335c1h1r2wd01d grm0335c1h1r2bd01d grm0335c1h1r2cd01d grm0335c1h1r3wd01d grm0335c1h1r3bd01d grm0335c1h1r3cd01d grm0335c1h1r4wd01d grm0335c1h1r4bd01d grm0335c1h1r4cd01d grm0335c1h1r5wd01d grm0335c1h1r5bd01d grm0335c1h1r5cd01d grm0335c1h1r6wd01d grm0335c1h1r6bd01d grm0335c1h1r6cd01d grm0335c1h1r7wd01d grm0335c1h1r7bd01d grm0335c1h1r7cd01d grm0335c1h1r8wd01d grm0335c1h1r8bd01d grm0335c1h1r8cd01d grm0335c1h1r9wd01d grm0335c1h1r9bd01d grm0335c1h1r9cd01d 50( 1h ) grm1555c1hr10wa01d grm1555c1hr10ba01d grm1555c1hr20wa01d grm1555c1hr20ba01d grm1555c1hr30wa01d grm1555c1hr30ba01d grm1555c1hr40wa01d grm1555c1hr40ba01d grm1555c1hr50wa01d grm1555c1hr50ba01d grm1555c1hr60wa01d grm1555c1hr60ba01d grm1555c1hr70wa01d grm1555c1hr70ba01d grm1555c1hr80wa01d grm1555c1hr80ba01d grm1555c1hr90wa01d grm1555c1hr90ba01d grm1555c1h1r0wa01d grm1555c1h1r0ba01d grm1555c1h1r0ca01d grm1555c1h1r1wa01d grm1555c1h1r1ba01d grm1555c1h1r1ca01d grm1555c1h1r2wa01d grm1555c1h1r2ba01d grm1555c1h1r2ca01d grm1555c1h1r3wa01d grm1555c1h1r3ba01d grm1555c1h1r3ca01d grm1555c1h1r4wa01d grm1555c1h1r4ba01d grm1555c1h1r4ca01d grm1555c1h1r5wa01d grm1555c1h1r5ba01d grm1555c1h1r5ca01d grm1555c1h1r6wa01d grm1555c1h1r6ba01d grm1555c1h1r6ca01d grm1555c1h1r7wa01d grm1555c1h1r7ba01d grm1555c1h1r7ca01d grm1555c1h1r8wa01d grm1555c1h1r8ba01d grm1555c1h1r8ca01d grm1555c1h1r9wa01d grm1555c1h1r9ba01d grm1555c1h1r9ca01d 0.4x0.2( 02 )<01005> 0.6x0.3( 03 )<0201> 1.0x0.5( 15 )<0402> 0.1pf( r10 ) 0.2pf( r20 ) 0.3pf( r30 ) 0.4pf( r40 ) 0.5pf( r50 ) 0.6pf( r60 ) 0.7pf( r70 ) 0.8pf( r80 ) 0.9pf( r90 ) 1.0pf( 1r0 ) 1.1pf( 1r1 ) 1.2pf( 1r2 ) 1.3pf( 1r3 ) 1.4pf( 1r4 ) 1.5pf( 1r5 ) 1.6pf( 1r6 ) 1.7pf( 1r7 ) 1.8pf( 1r8 ) 1.9pf( 1r9 ) 0.05pf( w ) 0.1pf( b ) 0.05pf( w ) 0.1pf( b ) 0.05pf( w ) 0.1pf( b ) 0.05pf( w ) 0.1pf( b ) 0.05pf( w ) 0.1pf( b ) 0.05pf( w ) 0.1pf( b ) 0.05pf( w ) 0.1pf( b ) 0.05pf( w ) 0.1pf( b ) 0.05pf( w ) 0.1pf( b ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) temperature compensating type c0g(5c) characteristics gr m 02 2 5c 1c r20 w d05 l packaging code in part number shows std 180mm reel taping. q product id w series e dimensions (lxw) r dimension (t) t temperature characteristics y rated voltage u capacitance i capacitance tolerance o individual specification code !0 packaging* (part number) w q e r t y u i o !0 * grm022 : d is applicable. for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
18 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. the part number code is shown in ( ) and unit is shown in [ ]. < >: eia [inch] code lxw [mm] rated volt. [vdc] capacitance tolerance part number 16( 1c ) grm0225c1c2r1wd05l grm0225c1c2r1bd05l grm0225c1c2r1cd05l grm0225c1c2r2wd05l grm0225c1c2r2bd05l grm0225c1c2r2cd05l grm0225c1c2r3wd05l grm0225c1c2r3bd05l grm0225c1c2r3cd05l grm0225c1c2r4wd05l grm0225c1c2r4bd05l grm0225c1c2r4cd05l grm0225c1c2r5wd05l grm0225c1c2r5bd05l grm0225c1c2r5cd05l grm0225c1c2r6wd05l grm0225c1c2r6bd05l grm0225c1c2r6cd05l grm0225c1c2r7wd05l grm0225c1c2r7bd05l grm0225c1c2r7cd05l grm0225c1c2r8wd05l grm0225c1c2r8bd05l grm0225c1c2r8cd05l grm0225c1c2r9wd05l grm0225c1c2r9bd05l grm0225c1c2r9cd05l grm0225c1c3r0wd05l grm0225c1c3r0bd05l grm0225c1c3r0cd05l grm0225c1c3r1wd05l grm0225c1c3r1bd05l grm0225c1c3r1cd05l grm0225c1c3r2wd05l grm0225c1c3r2bd05l grm0225c1c3r2cd05l grm0225c1c3r3wd05l grm0225c1c3r3bd05l grm0225c1c3r3cd05l grm0225c1c3r4wd05l grm0225c1c3r4bd05l grm0225c1c3r4cd05l grm0225c1c3r5wd05l grm0225c1c3r5bd05l grm0225c1c3r5cd05l 0.4x0.2( 02 )<01005> 50( 1h ) grm0335c1h2r1wd01d grm0335c1h2r1bd01d grm0335c1h2r1cd01d grm0335c1h2r2wd01d grm0335c1h2r2bd01d grm0335c1h2r2cd01d grm0335c1h2r3wd01d grm0335c1h2r3bd01d grm0335c1h2r3cd01d grm0335c1h2r4wd01d grm0335c1h2r4bd01d grm0335c1h2r4cd01d grm0335c1h2r5wd01d grm0335c1h2r5bd01d grm0335c1h2r5cd01d grm0335c1h2r6wd01d grm0335c1h2r6bd01d grm0335c1h2r6cd01d grm0335c1h2r7wd01d grm0335c1h2r7bd01d grm0335c1h2r7cd01d grm0335c1h2r8wd01d grm0335c1h2r8bd01d grm0335c1h2r8cd01d grm0335c1h2r9wd01d grm0335c1h2r9bd01d grm0335c1h2r9cd01d grm0335c1h3r0wd01d grm0335c1h3r0bd01d grm0335c1h3r0cd01d grm0335c1h3r1wd01d grm0335c1h3r1bd01d grm0335c1h3r1cd01d grm0335c1h3r2wd01d grm0335c1h3r2bd01d grm0335c1h3r2cd01d grm0335c1h3r3wd01d grm0335c1h3r3bd01d grm0335c1h3r3cd01d grm0335c1h3r4wd01d grm0335c1h3r4bd01d grm0335c1h3r4cd01d grm0335c1h3r5wd01d grm0335c1h3r5bd01d grm0335c1h3r5cd01d 0.6x0.3( 03 )<0201> 50( 1h ) grm1555c1h2r1wa01d grm1555c1h2r1ba01d grm1555c1h2r1ca01d grm1555c1h2r2wa01d grm1555c1h2r2ba01d grm1555c1h2r2ca01d GRM1555C1H2R3WA01D grm1555c1h2r3ba01d grm1555c1h2r3ca01d grm1555c1h2r4wa01d grm1555c1h2r4ba01d grm1555c1h2r4ca01d grm1555c1h2r5wa01d grm1555c1h2r5ba01d grm1555c1h2r5ca01d grm1555c1h2r6wa01d grm1555c1h2r6ba01d grm1555c1h2r6ca01d grm1555c1h2r7wa01d grm1555c1h2r7ba01d grm1555c1h2r7ca01d grm1555c1h2r8wa01d grm1555c1h2r8ba01d grm1555c1h2r8ca01d grm1555c1h2r9wa01d grm1555c1h2r9ba01d grm1555c1h2r9ca01d grm1555c1h3r0wa01d grm1555c1h3r0ba01d grm1555c1h3r0ca01d grm1555c1h3r1wa01d grm1555c1h3r1ba01d grm1555c1h3r1ca01d grm1555c1h3r2wa01d grm1555c1h3r2ba01d grm1555c1h3r2ca01d grm1555c1h3r3wa01d grm1555c1h3r3ba01d grm1555c1h3r3ca01d grm1555c1h3r4wa01d grm1555c1h3r4ba01d grm1555c1h3r4ca01d grm1555c1h3r5wa01d grm1555c1h3r5ba01d grm1555c1h3r5ca01d 1.0x0.5( 15 )<0402> 2.1pf( 2r1 ) 2.2pf( 2r2 ) 2.3pf( 2r3 ) 2.4pf( 2r4 ) 2.5pf( 2r5 ) 2.6pf( 2r6 ) 2.7pf( 2r7 ) 2.8pf( 2r8 ) 2.9pf( 2r9 ) 3.0pf( 3r0 ) 3.1pf( 3r1 ) 3.2pf( 3r2 ) 3.3pf( 3r3 ) 3.4pf( 3r4 ) 3.5pf( 3r5 ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) temperature compensating type c0g(5c) characteristics grm0225c1c2r0wd05l grm0225c1c2r0bd05l grm0225c1c2r0cd05l grm0335c1h2r0wd01d grm0335c1h2r0bd01d grm0335c1h2r0cd01d grm1555c1h2r0wa01d grm1555c1h2r0ba01d grm1555c1h2r0ca01d 2.0pf( 2r0 ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) gr m 02 2 5c 1c 2r0 w d05 l packaging code in part number shows std 180mm reel taping. q product id w series e dimensions (lxw) r dimension (t) t temperature characteristics y rated voltage u capacitance i capacitance tolerance o individual specification code !0 packaging* (part number) w q e r t y u i o !0 * grm022 : d is applicable. for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
19 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. the part number code is shown in ( ) and unit is shown in [ ]. < >: eia [inch] code lxw [mm] rated volt. [vdc] capacitance tolerance part number 16( 1c ) grm0225c1c3r8wd05l grm0225c1c3r8bd05l grm0225c1c3r8cd05l grm0225c1c3r9wd05l grm0225c1c3r9bd05l grm0225c1c3r9cd05l grm0225c1c4r0wd05l grm0225c1c4r0bd05l grm0225c1c4r0cd05l grm0225c1c4r1wd05l grm0225c1c4r1bd05l grm0225c1c4r1cd05l grm0225c1c4r2wd05l grm0225c1c4r2bd05l grm0225c1c4r2cd05l grm0225c1c4r3wd05l grm0225c1c4r3bd05l grm0225c1c4r3cd05l grm0225c1c4r4wd05l grm0225c1c4r4bd05l grm0225c1c4r4cd05l grm0225c1c4r5wd05l grm0225c1c4r5bd05l grm0225c1c4r5cd05l grm0225c1c4r6wd05l grm0225c1c4r6bd05l grm0225c1c4r6cd05l grm0225c1c4r7wd05l grm0225c1c4r7bd05l grm0225c1c4r7cd05l grm0225c1c4r8wd05l grm0225c1c4r8bd05l grm0225c1c4r8cd05l grm0225c1c4r9wd05l grm0225c1c4r9bd05l grm0225c1c4r9cd05l grm0225c1c5r0wd05l grm0225c1c5r0bd05l grm0225c1c5r0cd05l grm0225c1c5r1wd05l grm0225c1c5r1bd05l grm0225c1c5r1cd05l grm0225c1c5r1dd05l 0.4x0.2( 02 )<01005> 50( 1h ) grm0335c1h3r8wd01d grm0335c1h3r8bd01d grm0335c1h3r8cd01d grm0335c1h3r9wd01d grm0335c1h3r9bd01d grm0335c1h3r9cd01d grm0335c1h4r0wd01d grm0335c1h4r0bd01d grm0335c1h4r0cd01d grm0335c1h4r1wd01d grm0335c1h4r1bd01d grm0335c1h4r1cd01d grm0335c1h4r2wd01d grm0335c1h4r2bd01d grm0335c1h4r2cd01d grm0335c1h4r3wd01d grm0335c1h4r3bd01d grm0335c1h4r3cd01d grm0335c1h4r4wd01d grm0335c1h4r4bd01d grm0335c1h4r4cd01d grm0335c1h4r5wd01d grm0335c1h4r5bd01d grm0335c1h4r5cd01d grm0335c1h4r6wd01d grm0335c1h4r6bd01d grm0335c1h4r6cd01d grm0335c1h4r7wd01d grm0335c1h4r7bd01d grm0335c1h4r7cd01d grm0335c1h4r8wd01d grm0335c1h4r8bd01d grm0335c1h4r8cd01d grm0335c1h4r9wd01d grm0335c1h4r9bd01d grm0335c1h4r9cd01d grm0335c1h5r0wd01d grm0335c1h5r0bd01d grm0335c1h5r0cd01d grm0335c1h5r1wd01d grm0335c1h5r1bd01d grm0335c1h5r1cd01d grm0335c1h5r1dd01d 0.6x0.3( 03 )<0201> 50( 1h ) grm1555c1h3r8wa01d grm1555c1h3r8ba01d grm1555c1h3r8ca01d grm1555c1h3r9wa01d grm1555c1h3r9ba01d grm1555c1h3r9ca01d grm1555c1h4r0wa01d grm1555c1h4r0ba01d grm1555c1h4r0ca01d grm1555c1h4r1wa01d grm1555c1h4r1ba01d grm1555c1h4r1ca01d grm1555c1h4r2wa01d grm1555c1h4r2ba01d grm1555c1h4r2ca01d grm1555c1h4r3wa01d grm1555c1h4r3ba01d grm1555c1h4r3ca01d grm1555c1h4r4wa01d grm1555c1h4r4ba01d grm1555c1h4r4ca01d grm1555c1h4r5wa01d grm1555c1h4r5ba01d grm1555c1h4r5ca01d grm1555c1h4r6wa01d grm1555c1h4r6ba01d grm1555c1h4r6ca01d grm1555c1h4r7wa01d grm1555c1h4r7ba01d grm1555c1h4r7ca01d grm1555c1h4r8wa01d grm1555c1h4r8ba01d grm1555c1h4r8ca01d grm1555c1h4r9wa01d grm1555c1h4r9ba01d grm1555c1h4r9ca01d grm1555c1h5r0wa01d grm1555c1h5r0ba01d grm1555c1h5r0ca01d grm1555c1h5r1wa01d grm1555c1h5r1ba01d grm1555c1h5r1ca01d grm1555c1h5r1da01d 1.0x0.5( 15 )<0402> 3.8pf( 3r8 ) 3.9pf( 3r9 ) 4.0pf( 4r0 ) 4.1pf( 4r1 ) 4.2pf( 4r2 ) 4.3pf( 4r3 ) 4.4pf( 4r4 ) 4.5pf( 4r5 ) 4.6pf( 4r6 ) 4.7pf( 4r7 ) 4.8pf( 4r8 ) 4.9pf( 4r9 ) 5.0pf( 5r0 ) 5.1pf( 5r1 ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.5pf( d ) temperature compensating type c0g(5c) characteristics grm0225c1c3r6wd05l grm0225c1c3r6bd05l grm0225c1c3r6cd05l grm0225c1c3r7wd05l grm0225c1c3r7bd05l grm0225c1c3r7cd05l grm0335c1h3r6wd01d grm0335c1h3r6bd01d grm0335c1h3r6cd01d grm0335c1h3r7wd01d grm0335c1h3r7bd01d grm0335c1h3r7cd01d grm1555c1h3r6wa01d grm1555c1h3r6ba01d grm1555c1h3r6ca01d grm1555c1h3r7wa01d grm1555c1h3r7ba01d grm1555c1h3r7ca01d 3.6pf( 3r6 ) 3.7pf( 3r7 ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
20 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. the part number code is shown in ( ) and unit is shown in [ ]. < >: eia [inch] code lxw [mm] rated volt. [vdc] capacitance tolerance part number 16( 1c ) grm0225c1c5r3wd05l grm0225c1c5r3bd05l grm0225c1c5r3cd05l grm0225c1c5r3dd05l grm0225c1c5r4wd05l grm0225c1c5r4bd05l grm0225c1c5r4cd05l grm0225c1c5r4dd05l grm0225c1c5r5wd05l grm0225c1c5r5bd05l grm0225c1c5r5cd05l grm0225c1c5r5dd05l grm0225c1c5r6wd05l grm0225c1c5r6bd05l grm0225c1c5r6cd05l grm0225c1c5r6dd05l grm0225c1c5r7wd05l grm0225c1c5r7bd05l grm0225c1c5r7cd05l grm0225c1c5r7dd05l grm0225c1c5r8wd05l grm0225c1c5r8bd05l grm0225c1c5r8cd05l grm0225c1c5r8dd05l grm0225c1c5r9wd05l grm0225c1c5r9bd05l grm0225c1c5r9cd05l grm0225c1c5r9dd05l grm0225c1c6r0wd05l grm0225c1c6r0bd05l grm0225c1c6r0cd05l grm0225c1c6r0dd05l grm0225c1c6r1wd05l grm0225c1c6r1bd05l grm0225c1c6r1cd05l grm0225c1c6r1dd05l grm0225c1c6r2wd05l grm0225c1c6r2bd05l grm0225c1c6r2cd05l grm0225c1c6r2dd05l grm0225c1c6r3wd05l grm0225c1c6r3bd05l grm0225c1c6r3cd05l grm0225c1c6r3dd05l 0.4x0.2( 02 )<01005> 50( 1h ) grm0335c1h5r3wd01d grm0335c1h5r3bd01d grm0335c1h5r3cd01d grm0335c1h5r3dd01d grm0335c1h5r4wd01d grm0335c1h5r4bd01d grm0335c1h5r4cd01d grm0335c1h5r4dd01d grm0335c1h5r5wd01d grm0335c1h5r5bd01d grm0335c1h5r5cd01d grm0335c1h5r5dd01d grm0335c1h5r6wd01d grm0335c1h5r6bd01d grm0335c1h5r6cd01d grm0335c1h5r6dd01d grm0335c1h5r7wd01d grm0335c1h5r7bd01d grm0335c1h5r7cd01d grm0335c1h5r7dd01d grm0335c1h5r8wd01d grm0335c1h5r8bd01d grm0335c1h5r8cd01d grm0335c1h5r8dd01d grm0335c1h5r9wd01d grm0335c1h5r9bd01d grm0335c1h5r9cd01d grm0335c1h5r9dd01d grm0335c1h6r0wd01d grm0335c1h6r0bd01d grm0335c1h6r0cd01d grm0335c1h6r0dd01d grm0335c1h6r1wd01d grm0335c1h6r1bd01d grm0335c1h6r1cd01d grm0335c1h6r1dd01d grm0335c1h6r2wd01d grm0335c1h6r2bd01d grm0335c1h6r2cd01d grm0335c1h6r2dd01d grm0335c1h6r3wd01d grm0335c1h6r3bd01d grm0335c1h6r3cd01d grm0335c1h6r3dd01d 0.6x0.3( 03 )<0201> 50( 1h ) grm1555c1h5r3wa01d grm1555c1h5r3ba01d grm1555c1h5r3ca01d grm1555c1h5r3da01d grm1555c1h5r4wa01d grm1555c1h5r4ba01d grm1555c1h5r4ca01d grm1555c1h5r4da01d grm1555c1h5r5wa01d grm1555c1h5r5ba01d grm1555c1h5r5ca01d grm1555c1h5r5da01d grm1555c1h5r6wa01d grm1555c1h5r6ba01d grm1555c1h5r6ca01d grm1555c1h5r6da01d grm1555c1h5r7wa01d grm1555c1h5r7ba01d grm1555c1h5r7ca01d grm1555c1h5r7da01d grm1555c1h5r8wa01d grm1555c1h5r8ba01d grm1555c1h5r8ca01d grm1555c1h5r8da01d grm1555c1h5r9wa01d grm1555c1h5r9ba01d grm1555c1h5r9ca01d grm1555c1h5r9da01d grm1555c1h6r0wa01d grm1555c1h6r0ba01d grm1555c1h6r0ca01d grm1555c1h6r0da01d grm1555c1h6r1wa01d grm1555c1h6r1ba01d grm1555c1h6r1ca01d grm1555c1h6r1da01d grm1555c1h6r2wa01d grm1555c1h6r2ba01d grm1555c1h6r2ca01d grm1555c1h6r2da01d grm1555c1h6r3wa01d grm1555c1h6r3ba01d grm1555c1h6r3ca01d grm1555c1h6r3da01d 1.0x0.5( 15 )<0402> 5.3pf( 5r3 ) 5.4pf( 5r4 ) 5.5pf( 5r5 ) 5.6pf( 5r6 ) 5.7pf( 5r7 ) 5.8pf( 5r8 ) 5.9pf( 5r9 ) 6.0pf( 6r0 ) 6.1pf( 6r1 ) 6.2pf( 6r2 ) 6.3pf( 6r3 ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.5pf( d ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.5pf( d ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.5pf( d ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.5pf( d ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.5pf( d ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.5pf( d ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.5pf( d ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.5pf( d ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.5pf( d ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.5pf( d ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.5pf( d ) temperature compensating type c0g(5c) characteristics grm0225c1c5r2wd05l grm0225c1c5r2bd05l grm0225c1c5r2cd05l grm0225c1c5r2dd05l grm0335c1h5r2wd01d grm0335c1h5r2bd01d grm0335c1h5r2cd01d grm0335c1h5r2dd01d grm1555c1h5r2wa01d grm1555c1h5r2ba01d grm1555c1h5r2ca01d grm1555c1h5r2da01d 5.2pf( 5r2 ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.5pf( d ) gr m 02 2 5c 1c 5r2 w d05 l packaging code in part number shows std 180mm reel taping. q product id w series e dimensions (lxw) r dimension (t) t temperature characteristics y rated voltage u capacitance i capacitance tolerance o individual specification code !0 packaging* (part number) w q e r t y u i o !0 * grm022 : d is applicable. for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
21 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. the part number code is shown in ( ) and unit is shown in [ ]. < >: eia [inch] code lxw [mm] rated volt. [vdc] capacitance tolerance part number 16( 1c ) grm0225c1c6r6wd05l grm0225c1c6r6bd05l grm0225c1c6r6cd05l grm0225c1c6r6dd05l grm0225c1c6r7wd05l grm0225c1c6r7bd05l grm0225c1c6r7cd05l grm0225c1c6r7dd05l grm0225c1c6r8wd05l grm0225c1c6r8bd05l grm0225c1c6r8cd05l grm0225c1c6r8dd05l grm0225c1c6r9wd05l grm0225c1c6r9bd05l grm0225c1c6r9cd05l grm0225c1c6r9dd05l grm0225c1c7r0wd05l grm0225c1c7r0bd05l grm0225c1c7r0cd05l grm0225c1c7r0dd05l grm0225c1c7r1wd05l grm0225c1c7r1bd05l grm0225c1c7r1cd05l grm0225c1c7r1dd05l grm0225c1c7r2wd05l grm0225c1c7r2bd05l grm0225c1c7r2cd05l grm0225c1c7r2dd05l grm0225c1c7r3wd05l grm0225c1c7r3bd05l grm0225c1c7r3cd05l grm0225c1c7r3dd05l grm0225c1c7r4wd05l grm0225c1c7r4bd05l grm0225c1c7r4cd05l grm0225c1c7r4dd05l grm0225c1c7r5wd05l grm0225c1c7r5bd05l grm0225c1c7r5cd05l grm0225c1c7r5dd05l 0.4x0.2( 02 )<01005> 50( 1h ) grm0335c1h6r6wd01d grm0335c1h6r6bd01d grm0335c1h6r6cd01d grm0335c1h6r6dd01d grm0335c1h6r7wd01d grm0335c1h6r7bd01d grm0335c1h6r7cd01d grm0335c1h6r7dd01d grm0335c1h6r8wd01d grm0335c1h6r8bd01d grm0335c1h6r8cd01d grm0335c1h6r8dd01d grm0335c1h6r9wd01d grm0335c1h6r9bd01d grm0335c1h6r9cd01d grm0335c1h6r9dd01d grm0335c1h7r0wd01d grm0335c1h7r0bd01d grm0335c1h7r0cd01d grm0335c1h7r0dd01d grm0335c1h7r1wd01d grm0335c1h7r1bd01d grm0335c1h7r1cd01d grm0335c1h7r1dd01d grm0335c1h7r2wd01d grm0335c1h7r2bd01d grm0335c1h7r2cd01d grm0335c1h7r2dd01d grm0335c1h7r3wd01d grm0335c1h7r3bd01d grm0335c1h7r3cd01d grm0335c1h7r3dd01d grm0335c1h7r4wd01d grm0335c1h7r4bd01d grm0335c1h7r4cd01d grm0335c1h7r4dd01d grm0335c1h7r5wd01d grm0335c1h7r5bd01d grm0335c1h7r5cd01d grm0335c1h7r5dd01d 0.6x0.3( 03 )<0201> 50( 1h ) grm1555c1h6r6wa01d grm1555c1h6r6ba01d grm1555c1h6r6ca01d grm1555c1h6r6da01d grm1555c1h6r7wa01d grm1555c1h6r7ba01d grm1555c1h6r7ca01d grm1555c1h6r7da01d grm1555c1h6r8wa01d grm1555c1h6r8ba01d grm1555c1h6r8ca01d grm1555c1h6r8da01d grm1555c1h6r9wa01d grm1555c1h6r9ba01d grm1555c1h6r9ca01d grm1555c1h6r9da01d grm1555c1h7r0wa01d grm1555c1h7r0ba01d grm1555c1h7r0ca01d grm1555c1h7r0da01d grm1555c1h7r1wa01d grm1555c1h7r1ba01d grm1555c1h7r1ca01d grm1555c1h7r1da01d grm1555c1h7r2wa01d grm1555c1h7r2ba01d grm1555c1h7r2ca01d grm1555c1h7r2da01d grm1555c1h7r3wa01d grm1555c1h7r3ba01d grm1555c1h7r3ca01d grm1555c1h7r3da01d grm1555c1h7r4wa01d grm1555c1h7r4ba01d grm1555c1h7r4ca01d grm1555c1h7r4da01d grm1555c1h7r5wa01d grm1555c1h7r5ba01d grm1555c1h7r5ca01d grm1555c1h7r5da01d 1.0x0.5( 15 )<0402> 6.6pf( 6r6 ) 6.7pf( 6r7 ) 6.8pf( 6r8 ) 6.9pf( 6r9 ) 7.0pf( 7r0 ) 7.1pf( 7r1 ) 7.2pf( 7r2 ) 7.3pf( 7r3 ) 7.4pf( 7r4 ) 7.5pf( 7r5 ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.5pf( d ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.5pf( d ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.5pf( d ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.5pf( d ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.5pf( d ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.5pf( d ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.5pf( d ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.5pf( d ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.5pf( d ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.5pf( d ) temperature compensating type c0g(5c) characteristics grm0225c1c6r4wd05l grm0225c1c6r4bd05l grm0225c1c6r4cd05l grm0225c1c6r4dd05l grm0225c1c6r5wd05l grm0225c1c6r5bd05l grm0225c1c6r5cd05l grm0225c1c6r5dd05l grm0335c1h6r4wd01d grm0335c1h6r4bd01d grm0335c1h6r4cd01d grm0335c1h6r4dd01d grm0335c1h6r5wd01d grm0335c1h6r5bd01d grm0335c1h6r5cd01d grm0335c1h6r5dd01d grm1555c1h6r4wa01d grm1555c1h6r4ba01d grm1555c1h6r4ca01d grm1555c1h6r4da01d grm1555c1h6r5wa01d grm1555c1h6r5ba01d grm1555c1h6r5ca01d grm1555c1h6r5da01d 6.4pf( 6r4 ) 6.5pf( 6r5 ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.5pf( d ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.5pf( d ) for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
22 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. the part number code is shown in ( ) and unit is shown in [ ]. < >: eia [inch] code lxw [mm] rated volt. [vdc] capacitance tolerance part number 16( 1c ) grm0225c1c7r8wd05l grm0225c1c7r8bd05l grm0225c1c7r8cd05l grm0225c1c7r8dd05l grm0225c1c7r9wd05l grm0225c1c7r9bd05l grm0225c1c7r9cd05l grm0225c1c7r9dd05l grm0225c1c8r0wd05l grm0225c1c8r0bd05l grm0225c1c8r0cd05l grm0225c1c8r0dd05l grm0225c1c8r1wd05l grm0225c1c8r1bd05l grm0225c1c8r1cd05l grm0225c1c8r1dd05l grm0225c1c8r2wd05l grm0225c1c8r2bd05l grm0225c1c8r2cd05l grm0225c1c8r2dd05l grm0225c1c8r3wd05l grm0225c1c8r3bd05l grm0225c1c8r3cd05l grm0225c1c8r3dd05l grm0225c1c8r4wd05l grm0225c1c8r4bd05l grm0225c1c8r4cd05l grm0225c1c8r4dd05l grm0225c1c8r5wd05l grm0225c1c8r5bd05l grm0225c1c8r5cd05l grm0225c1c8r5dd05l grm0225c1c8r6wd05l grm0225c1c8r6bd05l grm0225c1c8r6cd05l grm0225c1c8r6dd05l grm0225c1c8r7wd05l grm0225c1c8r7bd05l grm0225c1c8r7cd05l grm0225c1c8r7dd05l 0.4x0.2( 02 )<01005> 50( 1h ) grm0335c1h7r8wd01d grm0335c1h7r8bd01d grm0335c1h7r8cd01d grm0335c1h7r8dd01d grm0335c1h7r9wd01d grm0335c1h7r9bd01d grm0335c1h7r9cd01d grm0335c1h7r9dd01d grm0335c1h8r0wd01d grm0335c1h8r0bd01d grm0335c1h8r0cd01d grm0335c1h8r0dd01d grm0335c1h8r1wd01d grm0335c1h8r1bd01d grm0335c1h8r1cd01d grm0335c1h8r1dd01d grm0335c1h8r2wd01d grm0335c1h8r2bd01d grm0335c1h8r2cd01d grm0335c1h8r2dd01d grm0335c1h8r3wd01d grm0335c1h8r3bd01d grm0335c1h8r3cd01d grm0335c1h8r3dd01d grm0335c1h8r4wd01d grm0335c1h8r4bd01d grm0335c1h8r4cd01d grm0335c1h8r4dd01d grm0335c1h8r5wd01d grm0335c1h8r5bd01d grm0335c1h8r5cd01d grm0335c1h8r5dd01d grm0335c1h8r6wd01d grm0335c1h8r6bd01d grm0335c1h8r6cd01d grm0335c1h8r6dd01d grm0335c1h8r7wd01d grm0335c1h8r7bd01d grm0335c1h8r7cd01d grm0335c1h8r7dd01d 0.6x0.3( 03 )<0201> 50( 1h ) grm1555c1h7r8wa01d grm1555c1h7r8ba01d grm1555c1h7r8ca01d grm1555c1h7r8da01d grm1555c1h7r9wa01d grm1555c1h7r9ba01d grm1555c1h7r9ca01d grm1555c1h7r9da01d grm1555c1h8r0wa01d grm1555c1h8r0ba01d grm1555c1h8r0ca01d grm1555c1h8r0da01d grm1555c1h8r1wa01d grm1555c1h8r1ba01d grm1555c1h8r1ca01d grm1555c1h8r1da01d grm1555c1h8r2wa01d grm1555c1h8r2ba01d grm1555c1h8r2ca01d grm1555c1h8r2da01d grm1555c1h8r3wa01d grm1555c1h8r3ba01d grm1555c1h8r3ca01d grm1555c1h8r3da01d grm1555c1h8r4wa01d grm1555c1h8r4ba01d grm1555c1h8r4ca01d grm1555c1h8r4da01d grm1555c1h8r5wa01d grm1555c1h8r5ba01d grm1555c1h8r5ca01d grm1555c1h8r5da01d grm1555c1h8r6wa01d grm1555c1h8r6ba01d grm1555c1h8r6ca01d grm1555c1h8r6da01d grm1555c1h8r7wa01d grm1555c1h8r7ba01d grm1555c1h8r7ca01d grm1555c1h8r7da01d 1.0x0.5( 15 )<0402> 7.8pf( 7r8 ) 7.9pf( 7r9 ) 8.0pf( 8r0 ) 8.1pf( 8r1 ) 8.2pf( 8r2 ) 8.3pf( 8r3 ) 8.4pf( 8r4 ) 8.5pf( 8r5 ) 8.6pf( 8r6 ) 8.7pf( 8r7 ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.5pf( d ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.5pf( d ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.5pf( d ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.5pf( d ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.5pf( d ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.5pf( d ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.5pf( d ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.5pf( d ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.5pf( d ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.5pf( d ) temperature compensating type c0g(5c) characteristics grm0225c1c7r6wd05l grm0225c1c7r6bd05l grm0225c1c7r6cd05l grm0225c1c7r6dd05l grm0225c1c7r7wd05l grm0225c1c7r7bd05l grm0225c1c7r7cd05l grm0225c1c7r7dd05l grm0335c1h7r6wd01d grm0335c1h7r6bd01d grm0335c1h7r6cd01d grm0335c1h7r6dd01d grm0335c1h7r7wd01d grm0335c1h7r7bd01d grm0335c1h7r7cd01d grm0335c1h7r7dd01d grm1555c1h7r6wa01d grm1555c1h7r6ba01d grm1555c1h7r6ca01d grm1555c1h7r6da01d grm1555c1h7r7wa01d grm1555c1h7r7ba01d grm1555c1h7r7ca01d grm1555c1h7r7da01d 7.6pf( 7r6 ) 7.7pf( 7r7 ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.5pf( d ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.5pf( d ) gr m 02 2 5c 1c 7r6 w d05 l packaging code in part number shows std 180mm reel taping. q product id w series e dimensions (lxw) r dimension (t) t temperature characteristics y rated voltage u capacitance i capacitance tolerance o individual specification code !0 packaging* (part number) w q e r t y u i o !0 * grm022 : d is applicable. for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
23 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. the part number code is shown in ( ) and unit is shown in [ ]. < >: eia [inch] code lxw [mm] rated volt. [vdc] capacitance tolerance part number 16( 1c ) grm0225c1c9r1wd05l grm0225c1c9r1bd05l grm0225c1c9r1cd05l grm0225c1c9r1dd05l grm0225c1c9r2wd05l grm0225c1c9r2bd05l grm0225c1c9r2cd05l grm0225c1c9r2dd05l grm0225c1c9r3wd05l grm0225c1c9r3bd05l grm0225c1c9r3cd05l grm0225c1c9r3dd05l grm0225c1c9r4wd05l grm0225c1c9r4bd05l grm0225c1c9r4cd05l grm0225c1c9r4dd05l grm0225c1c9r5wd05l grm0225c1c9r5bd05l grm0225c1c9r5cd05l grm0225c1c9r5dd05l grm0225c1c9r6wd05l grm0225c1c9r6bd05l grm0225c1c9r6cd05l grm0225c1c9r6dd05l grm0225c1c9r7wd05l grm0225c1c9r7bd05l grm0225c1c9r7cd05l grm0225c1c9r7dd05l grm0225c1c9r8wd05l grm0225c1c9r8bd05l grm0225c1c9r8cd05l grm0225c1c9r8dd05l grm0225c1c9r9wd05l grm0225c1c9r9bd05l grm0225c1c9r9cd05l grm0225c1c9r9dd05l 50( 1h ) grm0335c1h9r1wd01d grm0335c1h9r1bd01d grm0335c1h9r1cd01d grm0335c1h9r1dd01d grm0335c1h9r2wd01d grm0335c1h9r2bd01d grm0335c1h9r2cd01d grm0335c1h9r2dd01d grm0335c1h9r3wd01d grm0335c1h9r3bd01d grm0335c1h9r3cd01d grm0335c1h9r3dd01d grm0335c1h9r4wd01d grm0335c1h9r4bd01d grm0335c1h9r4cd01d grm0335c1h9r4dd01d grm0335c1h9r5wd01d grm0335c1h9r5bd01d grm0335c1h9r5cd01d grm0335c1h9r5dd01d grm0335c1h9r6wd01d grm0335c1h9r6bd01d grm0335c1h9r6cd01d grm0335c1h9r6dd01d grm0335c1h9r7wd01d grm0335c1h9r7bd01d grm0335c1h9r7cd01d grm0335c1h9r7dd01d grm0335c1h9r8wd01d grm0335c1h9r8bd01d grm0335c1h9r8cd01d grm0335c1h9r8dd01d grm0335c1h9r9wd01d grm0335c1h9r9bd01d grm0335c1h9r9cd01d grm0335c1h9r9dd01d 50( 1h ) grm1555c1h9r1wa01d grm1555c1h9r1ba01d grm1555c1h9r1ca01d grm1555c1h9r1da01d grm1555c1h9r2wa01d grm1555c1h9r2ba01d grm1555c1h9r2ca01d grm1555c1h9r2da01d grm1555c1h9r3wa01d grm1555c1h9r3ba01d grm1555c1h9r3ca01d grm1555c1h9r3da01d grm1555c1h9r4wa01d grm1555c1h9r4ba01d grm1555c1h9r4ca01d grm1555c1h9r4da01d grm1555c1h9r5wa01d grm1555c1h9r5ba01d grm1555c1h9r5ca01d grm1555c1h9r5da01d grm1555c1h9r6wa01d grm1555c1h9r6ba01d grm1555c1h9r6ca01d grm1555c1h9r6da01d grm1555c1h9r7wa01d grm1555c1h9r7ba01d grm1555c1h9r7ca01d grm1555c1h9r7da01d grm1555c1h9r8wa01d grm1555c1h9r8ba01d grm1555c1h9r8ca01d grm1555c1h9r8da01d grm1555c1h9r9wa01d grm1555c1h9r9ba01d grm1555c1h9r9ca01d grm1555c1h9r9da01d 0.6x0.3( 03 )<0201> 1.0x0.5( 15 )<0402> 0.4x0.2( 02 )<01005> 9.1pf( 9r1 ) 9.2pf( 9r2 ) 9.3pf( 9r3 ) 9.4pf( 9r4 ) 9.5pf( 9r5 ) 9.6pf( 9r6 ) 9.7pf( 9r7 ) 9.8pf( 9r8 ) 9.9pf( 9r9 ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.5pf( d ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.5pf( d ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.5pf( d ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.5pf( d ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.5pf( d ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.5pf( d ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.5pf( d ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.5pf( d ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.5pf( d ) temperature compensating type c0g(5c) characteristics grm0225c1c8r8wd05l grm0225c1c8r8bd05l grm0225c1c8r8cd05l grm0225c1c8r8dd05l grm0225c1c8r9wd05l grm0225c1c8r9bd05l grm0225c1c8r9cd05l grm0225c1c8r9dd05l grm0225c1c9r0wd05l grm0225c1c9r0bd05l grm0225c1c9r0cd05l grm0225c1c9r0dd05l grm0335c1h8r8wd01d grm0335c1h8r8bd01d grm0335c1h8r8cd01d grm0335c1h8r8dd01d grm0335c1h8r9wd01d grm0335c1h8r9bd01d grm0335c1h8r9cd01d grm0335c1h8r9dd01d grm0335c1h9r0wd01d grm0335c1h9r0bd01d grm0335c1h9r0cd01d grm0335c1h9r0dd01d grm1555c1h8r8wa01d grm1555c1h8r8ba01d grm1555c1h8r8ca01d grm1555c1h8r8da01d grm1555c1h8r9wa01d grm1555c1h8r9ba01d grm1555c1h8r9ca01d grm1555c1h8r9da01d grm1555c1h9r0wa01d grm1555c1h9r0ba01d grm1555c1h9r0ca01d grm1555c1h9r0da01d 8.8pf( 8r8 ) 8.9pf( 8r9 ) 9.0pf( 9r0 ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.5pf( d ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.5pf( d ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.5pf( d ) for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
24 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. the part number code is shown in ( ) and unit is shown in [ ]. < >: eia [inch] code lxw [mm] rated volt. [vdc] capacitance tolerance part number 16( 1c ) grm0225c1c100gd05l grm0225c1c100jd05l grm0225c1c120gd05l grm0225c1c120jd05l grm0225c1c150gd05l grm0225c1c150jd05l grm0225c1c180gd05l grm0225c1c180jd05l grm0225c1c220gd05l grm0225c1c220jd05l grm0225c1c270gd05l grm0225c1c270jd05l grm0225c1c330gd05l grm0225c1c330jd05l grm0225c1c390gd05l grm0225c1c390jd05l grm0225c1c470gd05l grm0225c1c470jd05l 10( 1a ) grm0225c1a560gd05l grm0225c1a560jd05l grm0225c1a680gd05l grm0225c1a680jd05l grm0225c1a820gd05l grm0225c1a820jd05l grm0225c1a101gd05l grm0225c1a101jd05l 6.3( 0j ) grm0225c0j560gd05l grm0225c0j560jd05l grm0225c0j680gd05l grm0225c0j680jd05l grm0225c0j820gd05l grm0225c0j820jd05l grm0225c0j101gd05l grm0225c0j101jd05l 50( 1h ) grm0335c1h100gd01d grm0335c1h100jd01d grm0335c1h120gd01d grm0335c1h120jd01d grm0335c1h150gd01d grm0335c1h150jd01d grm0335c1h180gd01d grm0335c1h180jd01d grm0335c1h220gd01d grm0335c1h220jd01d grm0335c1h270gd01d grm0335c1h270jd01d grm0335c1h330gd01d grm0335c1h330jd01d grm0335c1h390gd01d grm0335c1h390jd01d grm0335c1h470gd01d grm0335c1h470jd01d grm0335c1h560gd01d grm0335c1h560jd01d grm0335c1h680gd01d grm0335c1h680jd01d grm0335c1h820gd01d grm0335c1h820jd01d grm0335c1h101gd01d grm0335c1h101jd01d 0.4x0.2( 02 )<01005> 0.6x0.3( 03 )<0201> 10pf( 100 ) 12pf( 120 ) 15pf( 150 ) 18pf( 180 ) 22pf( 220 ) 27pf( 270 ) 33pf( 330 ) 39pf( 390 ) 47pf( 470 ) 56pf( 560 ) 68pf( 680 ) 82pf( 820 ) 100pf( 101 ) 2%( g ) 5%( j ) 2%( g ) 5%( j ) 2%( g ) 5%( j ) 2%( g ) 5%( j ) 2%( g ) 5%( j ) 2%( g ) 5%( j ) 2%( g ) 5%( j ) 2%( g ) 5%( j ) 2%( g ) 5%( j ) 2%( g ) 5%( j ) 2%( g ) 5%( j ) 2%( g ) 5%( j ) 2%( g ) 5%( j ) temperature compensating type c0g(5c) characteristics gr m 02 2 5c 1c 100 g d05 l packaging code in part number shows std 180mm reel taping. q product id w series e dimensions (lxw) r dimension (t) t temperature characteristics y rated voltage u capacitance i capacitance tolerance o individual specification code !0 packaging* (part number) w q e r t y u i o !0 * grm022 : d is applicable. for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
25 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. the part number code is shown in ( ) and unit is shown in [ ]. < >: eia [inch] code lxw [mm] rated volt. [vdc] tc capacitance tolerance part number 50( 1h ) grm1555c1h100ga01d grm1555c1h100ja01d grm1555c1h120ga01d grm1555c1h120ja01d grm1555c1h150ga01d grm1555c1h150ja01d grm1555c1h180ga01d grm1555c1h180ja01d grm1555c1h220ga01d grm1555c1h220ja01d grm1555c1h270ga01d grm1555c1h270ja01d grm1555c1h330ga01d grm1555c1h330ja01d grm1555c1h390ga01d grm1555c1h390ja01d grm1555c1h470ga01d grm1555c1h470ja01d grm1555c1h560ga01d grm1555c1h560ja01d grm1555c1h680ga01d grm1555c1h680ja01d grm1555c1h820ga01d grm1555c1h820ja01d grm1555c1h101ga01d grm1555c1h101ja01d grm1555c1h121ga01d grm1555c1h121ja01d grm1555c1h151ga01d grm1555c1h151ja01d grm1555c1h181ga01d grm1555c1h181ja01d grm1555c1h221ga01d grm1555c1h221ja01d grm1555c1h271ga01d grm1555c1h271ja01d grm1555c1h331ga01d grm1555c1h331ja01d grm1555c1h391ga01d grm1555c1h391ja01d grm1555c1h471ga01d grm1555c1h471ja01d grm1555c1h561ga01d grm1555c1h561ja01d grm1555c1h681ga01d grm1555c1h681ja01d grm1555c1h821ga01d grm1555c1h821ja01d grm1555c1h102ga01d grm1555c1h102ja01d c0g( 5c ) 1.0x0.5( 15 )<0402> 10pf( 100 ) 12pf( 120 ) 15pf( 150 ) 18pf( 180 ) 22pf( 220 ) 27pf( 270 ) 33pf( 330 ) 39pf( 390 ) 47pf( 470 ) 56pf( 560 ) 68pf( 680 ) 82pf( 820 ) 100pf( 101 ) 120pf( 121 ) 150pf( 151 ) 180pf( 181 ) 220pf( 221 ) 270pf( 271 ) 330pf( 331 ) 390pf( 391 ) 470pf( 471 ) 560pf( 561 ) 680pf( 681 ) 820pf( 821 ) 1000pf( 102 ) 2%( g ) 5%( j ) 2%( g ) 5%( j ) 2%( g ) 5%( j ) 2%( g ) 5%( j ) 2%( g ) 5%( j ) 2%( g ) 5%( j ) 2%( g ) 5%( j ) 2%( g ) 5%( j ) 2%( g ) 5%( j ) 2%( g ) 5%( j ) 2%( g ) 5%( j ) 2%( g ) 5%( j ) 2%( g ) 5%( j ) 2%( g ) 5%( j ) 2%( g ) 5%( j ) 2%( g ) 5%( j ) 2%( g ) 5%( j ) 2%( g ) 5%( j ) 2%( g ) 5%( j ) 2%( g ) 5%( j ) 2%( g ) 5%( j ) 2%( g ) 5%( j ) 2%( g ) 5%( j ) 2%( g ) 5%( j ) 2%( g ) 5%( j ) temperature compensating type c0g(5c) characteristics for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
26 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. the part number code is shown in ( ) and unit is shown in [ ]. < >: eia [inch] code lxw [mm] rated volt. [vdc] capacitance tolerance part number 100( 2a ) grm1885c2a100ja01d grm1885c2a120ja01d grm1885c2a150ja01d grm1885c2a180ja01d grm1885c2a220ja01d grm1885c2a270ja01d grm1885c2a330ja01d grm1885c2a390ja01d grm1885c2a470ja01d grm1885c2a560ja01d grm1885c2a680ja01d grm1885c2a820ja01d grm1885c2a101ja01d grm1885c2a121ja01d grm1885c2a151ja01d grm1885c2a181ja01d grm1885c2a221ja01d grm1885c2a271ja01d grm1885c2a331ja01d grm1885c2a391ja01d grm1885c2a471ja01d grm1885c2a561ja01d grm1885c2a681ja01d grm1885c2a821ja01d grm1885c2a102ja01d grm1885c2a122ja01d grm1885c2a152ja01d 50( 1h ) grm1885c1h100ja01d grm1885c1h120ja01d grm1885c1h150ja01d grm1885c1h180ja01d grm1885c1h220ja01d grm1885c1h270ja01d grm1885c1h330ja01d grm1885c1h390ja01d grm1885c1h470ja01d grm1885c1h560ja01d grm1885c1h680ja01d grm1885c1h820ja01d grm1885c1h101ja01d grm1885c1h121ja01d grm1885c1h151ja01d grm1885c1h181ja01d grm1885c1h221ja01d grm1885c1h271ja01d grm1885c1h331ja01d grm1885c1h391ja01d grm1885c1h471ja01d grm1885c1h561ja01d grm1885c1h681ja01d grm1885c1h821ja01d grm1885c1h102ja01d grm1885c1h122ja01d grm1885c1h152ja01d grm1885c1h182ja01d grm1885c1h222ja01d grm1885c1h272ja01d grm1885c1h332ja01d grm1885c1h392ja01d 1.6x0.8( 18 )<0603> 10pf( 100 ) 12pf( 120 ) 15pf( 150 ) 18pf( 180 ) 22pf( 220 ) 27pf( 270 ) 33pf( 330 ) 39pf( 390 ) 47pf( 470 ) 56pf( 560 ) 68pf( 680 ) 82pf( 820 ) 100pf( 101 ) 120pf( 121 ) 150pf( 151 ) 180pf( 181 ) 220pf( 221 ) 270pf( 271 ) 330pf( 331 ) 390pf( 391 ) 470pf( 471 ) 560pf( 561 ) 680pf( 681 ) 820pf( 821 ) 1000pf( 102 ) 1200pf( 122 ) 1500pf( 152 ) 1800pf( 182 ) 2200pf( 222 ) 2700pf( 272 ) 3300pf( 332 ) 3900pf( 392 ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) temperature compensating type c0g(5c) characteristics gr m 18 8 5c 2a 100 j a01 d packaging code in part number shows std 180mm reel taping. q product id w series e dimensions (lxw) r dimension (t) t temperature characteristics y rated voltage u capacitance i capacitance tolerance o individual specification code !0 packaging (part number) w q e r t y u i o !0 for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
27 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. the part number code is shown in ( ) and unit is shown in [ ]. < >: eia [inch] code lxw [mm] rated volt. [vdc] capacitance tolerance part number 100( 2a ) grm2165c2a101ja01d grm2165c2a121ja01d grm2165c2a151ja01d grm2165c2a181ja01d grm2165c2a221ja01d grm2165c2a271ja01d grm2165c2a331ja01d grm2165c2a391ja01d grm2165c2a471ja01d grm2165c2a561ja01d grm2165c2a681ja01d grm2165c2a821ja01d grm2165c2a102ja01d grm2165c2a122ja01d grm2165c2a152ja01d grm2165c2a182ja01d grm2165c2a222ja01d grm2165c2a272ja01d grm2165c2a332ja01d 50( 1h ) grm2165c1h122ja01d grm2165c1h152ja01d grm2165c1h182ja01d grm2165c1h222ja01d grm2165c1h272ja01d grm2165c1h332ja01d grm2165c1h392ja01d grm2165c1h472ja01d grm2195c1h562ja01d grm2195c1h682ja01d grm2195c1h822ja01d grm2195c1h103ja01d grm2195c1h123ja01d grm2195c1h153ja01d grm21b5c1h183ja01l grm21b5c1h223ja01l 100( 2a ) grm3195c2a182ja01d grm3195c2a222ja01d grm3195c2a272ja01d grm3195c2a332ja01d grm3195c2a392ja01d grm3195c2a472ja01d grm3195c2a562ja01d grm3195c2a682ja01d grm3195c2a822ja01d grm3195c2a103ja01d grm3195c2a123ja01d grm3195c2a153ja01d grm3195c2a183ja01d grm3195c2a223ja01d 50( 1h ) grm3195c1h472ja01d grm3195c1h562ja01d grm3195c1h682ja01d grm3195c1h822ja01d grm3195c1h103ja01d grm3195c1h123ja01d grm3195c1h153ja01d grm3195c1h183ja01d grm3195c1h223ja01d grm3195c1h273ja01d grm3195c1h333ja01d grm3195c1h393ja01d grm31m5c1h473ja01l grm31m5c1h563ja01l grm31c5c1h683ja01l grm31c5c1h823ja01l grm31c5c1h104ja01l 2.0x1.25( 21 )<0805> 3.2x1.6( 31 )<1206> 100pf( 101 ) 120pf( 121 ) 150pf( 151 ) 180pf( 181 ) 220pf( 221 ) 270pf( 271 ) 330pf( 331 ) 390pf( 391 ) 470pf( 471 ) 560pf( 561 ) 680pf( 681 ) 820pf( 821 ) 1000pf( 102 ) 1200pf( 122 ) 1500pf( 152 ) 1800pf( 182 ) 2200pf( 222 ) 2700pf( 272 ) 3300pf( 332 ) 3900pf( 392 ) 4700pf( 472 ) 5600pf( 562 ) 6800pf( 682 ) 8200pf( 822 ) 10000pf( 103 ) 12000pf( 123 ) 15000pf( 153 ) 18000pf( 183 ) 22000pf( 223 ) 27000pf( 273 ) 33000pf( 333 ) 39000pf( 393 ) 47000pf( 473 ) 56000pf( 563 ) 68000pf( 683 ) 82000pf( 823 ) 100000pf( 104 ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) temperature compensating type c0g(5c) characteristics for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
28 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. the part number code is shown in ( ) and unit is shown in [ ]. < >: eia [inch] code lxw [mm] rated volt. [vdc] capacitance tolerance part number 50( 1h ) grm1535c1hr10bdd5d grm1535c1hr20bdd5d grm1535c1hr30bdd5d grm1535c1hr40bdd5d grm1535c1hr50bdd5d grm1535c1hr60bdd5d grm1535c1hr70bdd5d grm1535c1hr80bdd5d grm1535c1hr90bdd5d grm1535c1h1r0cdd5d grm1535c1h1r1cdd5d grm1535c1h1r2cdd5d grm1535c1h1r3cdd5d grm1535c1h1r4cdd5d grm1535c1h1r5cdd5d grm1535c1h1r6cdd5d grm1535c1h1r7cdd5d grm1535c1h1r8cdd5d grm1535c1h1r9cdd5d grm1535c1h2r0cdd5d grm1535c1h2r1cdd5d grm1535c1h2r2cdd5d grm1535c1h2r3cdd5d grm1535c1h2r4cdd5d grm1535c1h2r5cdd5d grm1535c1h2r6cdd5d grm1535c1h2r7cdd5d grm1535c1h2r8cdd5d grm1535c1h2r9cdd5d grm1535c1h3r0cdd5d grm1535c1h3r1cdd5d grm1535c1h3r2cdd5d grm1535c1h3r3cdd5d grm1535c1h3r4cdd5d grm1535c1h3r5cdd5d grm1535c1h3r6cdd5d grm1535c1h3r7cdd5d grm1535c1h3r8cdd5d grm1535c1h3r9cdd5d grm1535c1h4r0cdd5d grm1535c1h4r1cdd5d grm1535c1h4r2cdd5d grm1535c1h4r3cdd5d grm1535c1h4r4cdd5d grm1535c1h4r5cdd5d grm1535c1h4r6cdd5d grm1535c1h4r7cdd5d grm1535c1h4r8cdd5d 1.0x0.5( 15 )<0402> 0.1pf( r10 ) 0.2pf( r20 ) 0.3pf( r30 ) 0.4pf( r40 ) 0.5pf( r50 ) 0.6pf( r60 ) 0.7pf( r70 ) 0.8pf( r80 ) 0.9pf( r90 ) 1.0pf( 1r0 ) 1.1pf( 1r1 ) 1.2pf( 1r2 ) 1.3pf( 1r3 ) 1.4pf( 1r4 ) 1.5pf( 1r5 ) 1.6pf( 1r6 ) 1.7pf( 1r7 ) 1.8pf( 1r8 ) 1.9pf( 1r9 ) 2.0pf( 2r0 ) 2.1pf( 2r1 ) 2.2pf( 2r2 ) 2.3pf( 2r3 ) 2.4pf( 2r4 ) 2.5pf( 2r5 ) 2.6pf( 2r6 ) 2.7pf( 2r7 ) 2.8pf( 2r8 ) 2.9pf( 2r9 ) 3.0pf( 3r0 ) 3.1pf( 3r1 ) 3.2pf( 3r2 ) 3.3pf( 3r3 ) 3.4pf( 3r4 ) 3.5pf( 3r5 ) 3.6pf( 3r6 ) 3.7pf( 3r7 ) 3.8pf( 3r8 ) 3.9pf( 3r9 ) 4.0pf( 4r0 ) 4.1pf( 4r1 ) 4.2pf( 4r2 ) 4.3pf( 4r3 ) 4.4pf( 4r4 ) 4.5pf( 4r5 ) 4.6pf( 4r6 ) 4.7pf( 4r7 ) 4.8pf( 4r8 ) 0.1pf( b ) 0.1pf( b ) 0.1pf( b ) 0.1pf( b ) 0.1pf( b ) 0.1pf( b ) 0.1pf( b ) 0.1pf( b ) 0.1pf( b ) 0.25pf( c ) 0.25pf( c ) 0.25pf( c ) 0.25pf( c ) 0.25pf( c ) 0.25pf( c ) 0.25pf( c ) 0.25pf( c ) 0.25pf( c ) 0.25pf( c ) 0.25pf( c ) 0.25pf( c ) 0.25pf( c ) 0.25pf( c ) 0.25pf( c ) 0.25pf( c ) 0.25pf( c ) 0.25pf( c ) 0.25pf( c ) 0.25pf( c ) 0.25pf( c ) 0.25pf( c ) 0.25pf( c ) 0.25pf( c ) 0.25pf( c ) 0.25pf( c ) 0.25pf( c ) 0.25pf( c ) 0.25pf( c ) 0.25pf( c ) 0.25pf( c ) 0.25pf( c ) 0.25pf( c ) 0.25pf( c ) 0.25pf( c ) 0.25pf( c ) 0.25pf( c ) 0.25pf( c ) 0.25pf( c ) lxw [mm] rated volt. [vdc] capacitance tolerance part number 50( 1h ) grm1535c1h5r1ddd5d grm1535c1h5r2ddd5d grm1535c1h5r3ddd5d grm1535c1h5r4ddd5d grm1535c1h5r5ddd5d grm1535c1h5r6ddd5d grm1535c1h5r7ddd5d grm1535c1h5r8ddd5d grm1535c1h5r9ddd5d grm1535c1h6r0ddd5d grm1535c1h6r1ddd5d grm1535c1h6r2ddd5d grm1535c1h6r3ddd5d grm1535c1h6r4ddd5d grm1535c1h6r5ddd5d grm1535c1h6r6ddd5d grm1535c1h6r7ddd5d grm1535c1h6r8ddd5d grm1535c1h6r9ddd5d grm1535c1h7r0ddd5d grm1535c1h7r1ddd5d grm1535c1h7r2ddd5d grm1535c1h7r3ddd5d grm1535c1h7r4ddd5d grm1535c1h7r5ddd5d grm1535c1h7r6ddd5d grm1535c1h7r7ddd5d grm1535c1h7r8ddd5d grm1535c1h7r9ddd5d grm1535c1h8r0ddd5d grm1535c1h8r1ddd5d grm1535c1h8r2ddd5d grm1535c1h8r3ddd5d grm1535c1h8r4ddd5d grm1535c1h8r5ddd5d grm1535c1h8r6ddd5d grm1535c1h8r7ddd5d grm1535c1h8r8ddd5d grm1535c1h8r9ddd5d grm1535c1h9r0ddd5d grm1535c1h9r1ddd5d grm1535c1h9r2ddd5d grm1535c1h9r3ddd5d grm1535c1h9r4ddd5d grm1535c1h9r5ddd5d grm1535c1h9r6ddd5d 1.0x0.5( 15 )<0402> 5.1pf( 5r1 ) 5.2pf( 5r2 ) 5.3pf( 5r3 ) 5.4pf( 5r4 ) 5.5pf( 5r5 ) 5.6pf( 5r6 ) 5.7pf( 5r7 ) 5.8pf( 5r8 ) 5.9pf( 5r9 ) 6.0pf( 6r0 ) 6.1pf( 6r1 ) 6.2pf( 6r2 ) 6.3pf( 6r3 ) 6.4pf( 6r4 ) 6.5pf( 6r5 ) 6.6pf( 6r6 ) 6.7pf( 6r7 ) 6.8pf( 6r8 ) 6.9pf( 6r9 ) 7.0pf( 7r0 ) 7.1pf( 7r1 ) 7.2pf( 7r2 ) 7.3pf( 7r3 ) 7.4pf( 7r4 ) 7.5pf( 7r5 ) 7.6pf( 7r6 ) 7.7pf( 7r7 ) 7.8pf( 7r8 ) 7.9pf( 7r9 ) 8.0pf( 8r0 ) 8.1pf( 8r1 ) 8.2pf( 8r2 ) 8.3pf( 8r3 ) 8.4pf( 8r4 ) 8.5pf( 8r5 ) 8.6pf( 8r6 ) 8.7pf( 8r7 ) 8.8pf( 8r8 ) 8.9pf( 8r9 ) 9.0pf( 9r0 ) 9.1pf( 9r1 ) 9.2pf( 9r2 ) 9.3pf( 9r3 ) 9.4pf( 9r4 ) 9.5pf( 9r5 ) 9.6pf( 9r6 ) 0.5pf( d ) 0.5pf( d ) 0.5pf( d ) 0.5pf( d ) 0.5pf( d ) 0.5pf( d ) 0.5pf( d ) 0.5pf( d ) 0.5pf( d ) 0.5pf( d ) 0.5pf( d ) 0.5pf( d ) 0.5pf( d ) 0.5pf( d ) 0.5pf( d ) 0.5pf( d ) 0.5pf( d ) 0.5pf( d ) 0.5pf( d ) 0.5pf( d ) 0.5pf( d ) 0.5pf( d ) 0.5pf( d ) 0.5pf( d ) 0.5pf( d ) 0.5pf( d ) 0.5pf( d ) 0.5pf( d ) 0.5pf( d ) 0.5pf( d ) 0.5pf( d ) 0.5pf( d ) 0.5pf( d ) 0.5pf( d ) 0.5pf( d ) 0.5pf( d ) 0.5pf( d ) 0.5pf( d ) 0.5pf( d ) 0.5pf( d ) 0.5pf( d ) 0.5pf( d ) 0.5pf( d ) 0.5pf( d ) 0.5pf( d ) 0.5pf( d ) temperature compensating type c0g(5c) characteristics-low profile grm1535c1h4r9cdd5d grm1535c1h5r0cdd5d 4.9pf( 4r9 ) 5.0pf( 5r0 ) 0.25pf( c ) 0.25pf( c ) gr m 15 3 5c 1h r10 b dd5 d packaging code in part number shows std 180mm reel taping. q product id w series e dimensions (lxw) r dimension (t) t temperature characteristics y rated voltage u capacitance i capacitance tolerance o individual specification code !0 packaging (part number) w q e r t y u i o !0 for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
29 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. the part number code is shown in ( ) and unit is shown in [ ]. < >: eia [inch] code lxw [mm] rated volt. [vdc] capacitance tolerance part number 50( 1h ) grm1535c1h100jdd5d grm1535c1h120jdd5d grm1535c1h150jdd5d grm1535c1h180jdd5d grm1535c1h220jdd5d grm1535c1h270jdd5d grm1535c1h330jdd5d grm1535c1h390jdd5d grm1535c1h470jdd5d grm1535c1h560jdd5d grm1535c1h680jdd5d grm1535c1h820jdd5d grm1535c1h101jdd5d grm1535c1h121jdd5d grm1535c1h151jdd5d grm1535c1h181jdd5d grm1535c1h221jdd5d grm1535c1h271jdd5d grm1535c1h331jdd5d grm1535c1h391jdd5d grm1535c1h471jdd5d grm1535c1h561jdd5d grm1535c1h681jdd5d 1.0x0.5( 15 )<0402> 10pf( 100 ) 12pf( 120 ) 15pf( 150 ) 18pf( 180 ) 22pf( 220 ) 27pf( 270 ) 33pf( 330 ) 39pf( 390 ) 47pf( 470 ) 56pf( 560 ) 68pf( 680 ) 82pf( 820 ) 100pf( 101 ) 120pf( 121 ) 150pf( 151 ) 180pf( 181 ) 220pf( 221 ) 270pf( 271 ) 330pf( 331 ) 390pf( 391 ) 470pf( 471 ) 560pf( 561 ) 680pf( 681 ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) temperature compensating type c0g(5c) characteristics-low profile grm1535c1h9r7ddd5d grm1535c1h9r8ddd5d grm1535c1h9r9ddd5d 9.7pf( 9r7 ) 9.8pf( 9r8 ) 9.9pf( 9r9 ) 0.5pf( d ) 0.5pf( d ) 0.5pf( d ) for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
30 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. the part number code is shown in ( ) and unit is shown in [ ]. < >: eia [inch] code lxw [mm] rated volt. [vdc] capacitance tolerance part number 100( 2a ) grm2165c2a101ja01d grm2165c2a121ja01d grm2165c2a151ja01d grm2165c2a181ja01d grm2165c2a221ja01d grm2165c2a271ja01d grm2165c2a331ja01d grm2165c2a391ja01d grm2165c2a471ja01d grm2165c2a561ja01d grm2165c2a681ja01d grm2165c2a821ja01d grm2165c2a102ja01d grm2165c2a122ja01d grm2165c2a152ja01d grm2165c2a182ja01d grm2165c2a222ja01d grm2165c2a272ja01d grm2165c2a332ja01d 50( 1h ) grm2165c1h122ja01d grm2165c1h152ja01d grm2165c1h182ja01d grm2165c1h222ja01d grm2165c1h272ja01d grm2165c1h332ja01d grm2165c1h392ja01d grm2165c1h472ja01d grm2195c1h562ja01d grm2195c1h682ja01d grm2195c1h822ja01d grm2195c1h103ja01d grm2195c1h123ja01d grm2195c1h153ja01d 100( 2a ) grm3195c2a182ja01d grm3195c2a222ja01d grm3195c2a272ja01d grm3195c2a332ja01d grm3195c2a392ja01d grm3195c2a472ja01d grm3195c2a562ja01d grm3195c2a682ja01d grm3195c2a822ja01d grm3195c2a103ja01d 50( 1h ) grm3195c1h472ja01d grm3195c1h562ja01d grm3195c1h682ja01d grm3195c1h822ja01d grm3195c1h103ja01d grm3195c1h123ja01d grm3195c1h153ja01d grm3195c1h183ja01d grm3195c1h223ja01d grm3195c1h273ja01d grm3195c1h333ja01d grm3195c1h393ja01d grm31m5c1h473ja01l grm31m5c1h563ja01l 2.0x1.25( 21 )<0805> 3.2x1.6( 31 )<1206> 100pf( 101 ) 120pf( 121 ) 150pf( 151 ) 180pf( 181 ) 220pf( 221 ) 270pf( 271 ) 330pf( 331 ) 390pf( 391 ) 470pf( 471 ) 560pf( 561 ) 680pf( 681 ) 820pf( 821 ) 1000pf( 102 ) 1200pf( 122 ) 1500pf( 152 ) 1800pf( 182 ) 2200pf( 222 ) 2700pf( 272 ) 3300pf( 332 ) 3900pf( 392 ) 4700pf( 472 ) 5600pf( 562 ) 6800pf( 682 ) 8200pf( 822 ) 10000pf( 103 ) 12000pf( 123 ) 15000pf( 153 ) 18000pf( 183 ) 22000pf( 223 ) 27000pf( 273 ) 33000pf( 333 ) 39000pf( 393 ) 47000pf( 473 ) 56000pf( 563 ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) temperature compensating type c0g(5c) characteristics-low profile gr m 21 6 5c 2a 101 j a01 d packaging code in part number shows std 180mm reel taping. q product id w series e dimensions (lxw) r dimension (t) t temperature characteristics y rated voltage u capacitance i capacitance tolerance o individual specification code !0 packaging (part number) w q e r t y u i o !0 for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
31 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. the part number code is shown in ( ) and unit is shown in [ ]. < >: eia [inch] code lxw [mm] rated volt. [vdc] capacitance tolerance part number 50( 1h ) grm0337u1h1r0cd01d grm0337u1h2r0cd01d grm0337u1h3r0cd01d grm0337u1h4r0cd01d grm0337u1h5r0cd01d grm0337u1h6r0dd01d grm0337u1h7r0dd01d grm0337u1h8r0dd01d grm0337u1h9r0dd01d grm0337u1h100jd01d grm0337u1h120jd01d grm0337u1h150jd01d 25( 1e ) grm0337u1e180jd01d grm0337u1e220jd01d grm0337u1e270jd01d grm0337u1e330jd01d grm0337u1e390jd01d grm0337u1e470jd01d grm0337u1e560jd01d grm0337u1e680jd01d grm0337u1e820jd01d grm0337u1e101jd01d 50( 1h ) grm1557u1h1r0cz01d grm1557u1h2r0cz01d grm1557u1h3r0cz01d grm1557u1h4r0cz01d grm1557u1h5r0cz01d grm1557u1h6r0dz01d grm1557u1h7r0dz01d grm1557u1h8r0dz01d grm1557u1h9r0dz01d grm1557u1h100jz01d grm1557u1h120jz01d grm1557u1h150jz01d grm1557u1h180jz01d grm1557u1h220jz01d grm1557u1h270jz01d grm1557u1h330jz01d grm1557u1h390jz01d grm1557u1h470jz01d grm1557u1h560jz01d grm1557u1h680jz01d grm1557u1h820jz01d grm1557u1h101jz01d grm1557u1h121jz01d grm1557u1h151jz01d grm1557u1h181jz01d 10( 1a ) grm1557u1a122ja01d grm1557u1a152ja01d grm1557u1a182ja01d grm1557u1a222ja01d grm1557u1a272ja01d grm1557u1a332ja01d grm1557u1a392ja01d grm1557u1a472ja01d 0.6x0.3( 03 )<0201> 1.0x0.5( 15 )<0402> 1.0pf( 1r0 ) 2.0pf( 2r0 ) 3.0pf( 3r0 ) 4.0pf( 4r0 ) 5.0pf( 5r0 ) 6.0pf( 6r0 ) 7.0pf( 7r0 ) 8.0pf( 8r0 ) 9.0pf( 9r0 ) 10pf( 100 ) 12pf( 120 ) 15pf( 150 ) 18pf( 180 ) 22pf( 220 ) 27pf( 270 ) 33pf( 330 ) 39pf( 390 ) 47pf( 470 ) 56pf( 560 ) 68pf( 680 ) 82pf( 820 ) 100pf( 101 ) 120pf( 121 ) 150pf( 151 ) 180pf( 181 ) 1200pf( 122 ) 1500pf( 152 ) 1800pf( 182 ) 2200pf( 222 ) 2700pf( 272 ) 3300pf( 332 ) 3900pf( 392 ) 4700pf( 472 ) 0.25pf( c ) 0.25pf( c ) 0.25pf( c ) 0.25pf( c ) 0.25pf( c ) 0.5pf( d ) 0.5pf( d ) 0.5pf( d ) 0.5pf( d ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) temperature compensating type u2j(7u) characteristics for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
32 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. the part number code is shown in ( ) and unit is shown in [ ]. < >: eia [inch] code lxw [mm] rated volt. [vdc] capacitance tolerance part number 50( 1h ) grm1887u1h102ja01d grm1887u1h122ja01d grm1887u1h152ja01d grm1887u1h182ja01d grm1887u1h222ja01d grm1887u1h272ja01d grm1887u1h332ja01d grm1887u1h392ja01d grm1887u1h472ja01d grm1887u1h562ja01d grm1887u1h682ja01d grm1887u1h822ja01d grm1887u1h103ja01d 10( 1a ) grm1887u1a123ja01d grm1887u1a153ja01d grm1887u1a183ja01d grm1887u1a223ja01d 1.6x0.8( 18 )<0603> 1000pf( 102 ) 1200pf( 122 ) 1500pf( 152 ) 1800pf( 182 ) 2200pf( 222 ) 2700pf( 272 ) 3300pf( 332 ) 3900pf( 392 ) 4700pf( 472 ) 5600pf( 562 ) 6800pf( 682 ) 8200pf( 822 ) 10000pf( 103 ) 12000pf( 123 ) 15000pf( 153 ) 18000pf( 183 ) 22000pf( 223 ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) lxw [mm] rated volt. [vdc] capacitance tolerance part number 50( 1h ) grm2167u1h103ja01d grm2167u1h123ja01d grm2167u1h153ja01d grm2167u1h183ja01d grm2197u1h223ja01d grm2197u1h273ja01d grm21a7u1h333ja39l grm21b7u1h393ja01l grm21b7u1h473ja01l 10( 1a ) grm2197u1a563ja01d grm21b7u1a683ja01l grm21b7u1a823ja01l grm21b7u1a104ja01l 50( 1h ) grm3197u1h563ja01d grm31m7u1h683ja01l grm31m7u1h823ja01l grm31m7u1h104ja01l 2.0x1.25( 21 )<0805> 3.2x1.6( 31 )<1206> 10000pf( 103 ) 12000pf( 123 ) 15000pf( 153 ) 18000pf( 183 ) 22000pf( 223 ) 27000pf( 273 ) 33000pf( 333 ) 39000pf( 393 ) 47000pf( 473 ) 56000pf( 563 ) 68000pf( 683 ) 82000pf( 823 ) 100000pf( 104 ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) temperature compensating type u2j(7u) characteristics gr m 18 8 7u 1h 102 j a01 d packaging code in part number shows std 180mm reel taping. q product id w series e dimensions (lxw) r dimension (t) t temperature characteristics y rated voltage u capacitance i capacitance tolerance o individual specification code !0 packaging (part number) w q e r t y u i o !0 for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
33 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. the part number code is shown in ( ) and unit is shown in [ ]. < >: eia [inch] code lxw [mm] rated volt. [vdc] capacitance tolerance part number 50( 1h ) grm1857u1h222ja44d grm1857u1h272ja44d grm1857u1h332ja44d grm1857u1h392ja44d grm1857u1h472ja44d 10( 1a ) grm1857u1a562ja44d grm1857u1a682ja44d grm1857u1a822ja44d grm1857u1a103ja44d 1.6x0.8( 18 )<0603> 2200pf( 222 ) 2700pf( 272 ) 3300pf( 332 ) 3900pf( 392 ) 4700pf( 472 ) 5600pf( 562 ) 6800pf( 682 ) 8200pf( 822 ) 10000pf( 103 ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) lxw [mm] rated volt. [vdc] capacitance tolerance part number 50( 1h ) grm2167u1h103ja01d grm2167u1h123ja01d grm2167u1h153ja01d grm2167u1h183ja01d grm2197u1h223ja01d grm2197u1h273ja01d grm21a7u1h333ja39l 10( 1a ) grm2197u1a563ja01d 50( 1h ) grm3197u1h563ja01d grm31m7u1h683ja01l grm31m7u1h823ja01l grm31m7u1h104ja01l 2.0x1.25( 21 )<0805> 3.2x1.6( 31 )<1206> 10000pf( 103 ) 12000pf( 123 ) 15000pf( 153 ) 18000pf( 183 ) 22000pf( 223 ) 27000pf( 273 ) 33000pf( 333 ) 56000pf( 563 ) 68000pf( 683 ) 82000pf( 823 ) 100000pf( 104 ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) temperature compensating type u2j(7u) characteristics-low profile for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
34 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. the part number code is shown in ( ) and unit is shown in [ ]. < >: eia [inch] code 50( 1h ) grm1556p1h1r0cz01d grm1556p1h2r0cz01d grm1556p1h3r0cz01d grm1556p1h4r0cz01d grm1556p1h5r0cz01d grm1556p1h6r0dz01d grm1556p1h7r0dz01d grm1556p1h8r0dz01d grm1556p1h9r0dz01d grm1556p1h100jz01d grm1556p1h120jz01d grm1556p1h150jz01d grm1556p1h180jz01d grm1556p1h220jz01d grm1556p1h270jz01d 1.0x0.5( 15 )<0402> temperature compensating type p2h(6p), r2h(6r) characteristics lxw [mm] rated volt. [vdc] capacitance tolerance part number 25( 1e ) grm0336r1e1r0cd01d grm0336r1e2r0cd01d grm0336r1e3r0cd01d grm0336r1e4r0cd01d grm0336r1e5r0cd01d grm0336r1e6r0dd01d grm0336r1e7r0dd01d grm0336r1e8r0dd01d grm0336r1e9r0dd01d grm0336r1e100jd01d grm0336r1e120jd01d grm0336r1e150jd01d grm0336r1e180jd01d grm0336r1e220jd01d grm0336r1e270jd01d grm0336r1e330jd01d grm0336r1e390jd01d grm0336r1e470jd01d grm0336r1e560jd01d grm0336r1e680jd01d grm0336r1e820jd01d grm0336r1e101jd01d 50( 1h ) grm1556r1h1r0cd01d grm1556r1h2r0cz01d grm1556r1h3r0cz01d grm1556r1h4r0cz01d grm1556r1h5r0cz01d grm1556r1h6r0dz01d grm1556r1h7r0dz01d grm1556r1h8r0dz01d grm1556r1h9r0dz01d grm1556r1h100jz01d grm1556r1h120jz01d grm1556r1h150jz01d grm1556r1h180jz01d grm1556r1h220jz01d grm1556r1h270jz01d grm1556r1h330jz01d 1.0x0.5( 15 )<0402> 0.6x0.3( 03 )<0201> p2h tc r2h 1.0pf( 1r0 ) 2.0pf( 2r0 ) 3.0pf( 3r0 ) 4.0pf( 4r0 ) 5.0pf( 5r0 ) 6.0pf( 6r0 ) 7.0pf( 7r0 ) 8.0pf( 8r0 ) 9.0pf( 9r0 ) 10pf( 100 ) 12pf( 120 ) 15pf( 150 ) 18pf( 180 ) 22pf( 220 ) 27pf( 270 ) 33pf( 330 ) 39pf( 390 ) 47pf( 470 ) 56pf( 560 ) 68pf( 680 ) 82pf( 820 ) 100pf( 101 ) 0.25pf( c ) 0.25pf( c ) 0.25pf( c ) 0.25pf( c ) 0.25pf( c ) 0.5pf( d ) 0.5pf( d ) 0.5pf( d ) 0.5pf( d ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) gr m 15 5 6p 1h 1r0 c z01 d packaging code in part number shows std 180mm reel taping. q product id w series e dimensions (lxw) r dimension (t) t temperature characteristics y rated voltage u capacitance i capacitance tolerance o individual specification code !0 packaging (part number) w q e r t y u i o !0 for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
35 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. the part number code is shown in ( ) and unit is shown in [ ]. < >: eia [inch] code lxw [mm] rated volt. [vdc] capacitance tolerance 25( 1e ) grm0336s1e1r0cd01d grm0336s1e2r0cd01d grm0336s1e3r0cd01d grm0336s1e4r0cd01d grm0336s1e5r0cd01d grm0336s1e6r0dd01d grm0336s1e7r0dd01d grm0336s1e8r0dd01d grm0336s1e9r0dd01d grm0336s1e100jd01d grm0336s1e120jd01d grm0336s1e150jd01d grm0336s1e180jd01d grm0336s1e220jd01d grm0336s1e270jd01d grm0336s1e330jd01d grm0336s1e390jd01d grm0336s1e470jd01d grm0336s1e560jd01d grm0336s1e680jd01d grm0336s1e820jd01d grm0336s1e101jd01d 50( 1h ) grm1556s1h1r0cd01d grm1556s1h2r0cz01d grm1556s1h3r0cz01d grm1556s1h4r0cz01d grm1556s1h5r0cz01d grm1556s1h6r0dz01d grm1556s1h7r0dz01d grm1556s1h8r0dz01d grm1556s1h9r0dz01d grm1556s1h100jz01d grm1556s1h120jz01d grm1556s1h150jz01d grm1556s1h180jz01d grm1556s1h220jz01d grm1556s1h270jz01d grm1556s1h330jz01d grm1556s1h390jz01d 1.0x0.5( 15 )<0402> 0.6x0.3( 03 )<0201> 1.0pf( 1r0 ) 2.0pf( 2r0 ) 3.0pf( 3r0 ) 4.0pf( 4r0 ) 5.0pf( 5r0 ) 6.0pf( 6r0 ) 7.0pf( 7r0 ) 8.0pf( 8r0 ) 9.0pf( 9r0 ) 10pf( 100 ) 12pf( 120 ) 15pf( 150 ) 18pf( 180 ) 22pf( 220 ) 27pf( 270 ) 33pf( 330 ) 39pf( 390 ) 47pf( 470 ) 56pf( 560 ) 68pf( 680 ) 82pf( 820 ) 100pf( 101 ) 0.25pf( c ) 0.25pf( c ) 0.25pf( c ) 0.25pf( c ) 0.25pf( c ) 0.5pf( d ) 0.5pf( d ) 0.5pf( d ) 0.5pf( d ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) 5%( j ) temperature compensating type s2h(6s), t2h(6t) characteristics 25( 1e ) grm0336t1e1r0cd01d grm0336t1e2r0cd01d grm0336t1e3r0cd01d grm0336t1e4r0cd01d grm0336t1e5r0cd01d grm0336t1e6r0dd01d grm0336t1e7r0dd01d grm0336t1e8r0dd01d grm0336t1e9r0dd01d grm0336t1e100jd01d grm0336t1e120jd01d grm0336t1e150jd01d grm0336t1e180jd01d grm0336t1e220jd01d grm0336t1e270jd01d grm0336t1e330jd01d grm0336t1e390jd01d grm0336t1e470jd01d grm0336t1e560jd01d grm0336t1e680jd01d grm0336t1e820jd01d grm0336t1e101jd01d 50( 1h ) grm1556t1h1r0cd01d grm1556t1h2r0cd01d grm1556t1h3r0cd01d grm1556t1h4r0cd01d grm1556t1h5r0cd01d grm1556t1h6r0dd01d grm1556t1h7r0dd01d grm1556t1h8r0dd01d grm1556t1h9r0dd01d grm1556t1h100jd01d grm1556t1h120jd01d grm1556t1h150jd01d grm1556t1h180jd01d grm1556t1h220jd01d grm1556t1h270jd01d grm1556t1h330jd01d grm1556t1h390jd01d grm1556t1h470jd01d grm1556t1h560jd01d grm1556t1h680jd01d grm1556t1h820jd01d grm1556t1h101jd01d 1.0x0.5( 15 )<0402> 0.6x0.3( 03 )<0201> tc s2h t2h part number for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
36 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. the part number code is shown in ( ) and unit is shown in [ ]. < >: eia [inch] code lxw [mm] rated volt. [vdc] capacitance tolerance part number 10( 1a ) grm022r71a680ka01l grm022r71a101ka01l grm022r71a151ka01l grm022r71a221ka01l grm022r71a331ka01l grm022r71a471ka01l 0.4x0.2( 02 )<01005> 68pf( 680 ) 100pf( 101 ) 150pf( 151 ) 220pf( 221 ) 330pf( 331 ) 470pf( 471 ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) lxw [mm] rated volt. [vdc] capacitance tolerance part number 25( 1e ) grm033r71e101ka01d grm033r71e151ka01d grm033r71e221ka01d grm033r71e331ka01d grm033r71e471ka01d grm033r71e681ka01d grm033r71e102ka01d grm033r71e152ka01d 16( 1c ) grm033r71c101ka01d grm033r71c151ka01d grm033r71c221ka01d grm033r71c331ka01d grm033r71c471ka01d grm033r71c681ka01d grm033r71c102ka01d grm033r71c152ka01d grm033r71c222ka88d grm033r71c332ka88d 10( 1a ) grm033r71a222ka01d grm033r71a332ka01d grm033r71a472ka01d grm033r71a682ka01d grm033r71a103ka01d 6.3( 0j ) grm033r70j472ka01d grm033r70j682ka01d grm033r70j103ka01d 0.6x0.3( 03 )<0201> 100pf( 101 ) 150pf( 151 ) 220pf( 221 ) 330pf( 331 ) 470pf( 471 ) 680pf( 681 ) 1000pf( 102 ) 1500pf( 152 ) 2200pf( 222 ) 3300pf( 332 ) 4700pf( 472 ) 6800pf( 682 ) 10000pf( 103 ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) high dielectric constant type x7r(r7) characteristics gr m 02 2 r7 1a 680 k a01 l packaging code in part number shows std 180mm reel taping. q product id w series e dimensions (lxw) r dimension (t) t temperature characteristics y rated voltage u capacitance i capacitance tolerance o individual specification code !0 packaging (part number) w q e r t y u i o !0 for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
37 ! note ?please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. ?this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. the part number code is shown in ( ) and unit is shown in [ ]. < >: eia [inch] code * please refer to grm series specifications and test method (2). lxw [mm] rated volt. [vdc] capacitance tolerance part number 100( 2a ) grm155r72a221ka01d grm155r72a331ka01d grm155r72a471ka01d grm155r72a681ka01d grm155r72a102ka01d grm155r72a152ka01d grm155r72a222ka01d grm155r72a332ka01d grm155r72a472ka01d 50( 1h ) grm155r71h221ka01d grm155r71h331ka01d grm155r71h471ka01d grm155r71h681ka01d grm155r71h102ka01d grm155r71h152ka01d grm155r71h222ka01d grm155r71h332ka01d grm155r71h472ka01d grm155r71h682ka88d grm155r71h103ka88d grm155r71h153ka12d grm155r71h223ka12d 25( 1e ) grm155r71e472ka01d grm155r71e682ka01d grm155r71e103ka01d grm155r71e153ka61d grm155r71e223ka61d grm155r71e333ka88d grm155r71e473ka88d 16( 1c ) grm155r71c153ka01d grm155r71c223ka01d grm155r71c333ka01d grm155r71c473ka01d grm155r71c683ka88d grm155r71c104ka88d grm155r71c154ka12d* grm155r71c224ka12d* 1.0x0.5( 15 )<0402> 220pf( 221 ) 330pf( 331 ) 470pf( 471 ) 680pf( 681 ) 1000pf( 102 ) 1500pf( 152 ) 2200pf( 222 ) 3300pf( 332 ) 4700pf( 472 ) 6800pf( 682 ) 10000pf( 103 ) 15000pf( 153 ) 22000pf( 223 ) 33000pf( 333 ) 47000pf( 473 ) 68000pf( 683 ) 0.10 f( 104 ) 0.15 f( 154 ) 0.22 f( 224 ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) lxw [mm] rated volt. [vdc] capacitance tolerance part number 10( 1a ) grm155r71a683ka01d grm155r71a104ka01d 1.0x0.5( 15 )<0402> 68000pf( 683 ) 0.10 f( 104 ) 10%( k ) 10%( k ) high dielectric constant type x7r(r7) characteristics for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
38 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. the part number code is shown in ( ) and unit is shown in [ ]. < >: eia [inch] code * please refer to grm series specifications and test method (2). lxw [mm] rated volt. [vdc] capacitance tolerance part number 100( 2a ) grm188r72a221ka01d grm188r72a331ka01d grm188r72a471ka01d grm188r72a681ka01d grm188r72a102ka01d grm188r72a152ka01d grm188r72a222ka01d grm188r72a332ka01d grm188r72a472ka01d grm188r72a682ka01d grm188r72a103ka01d grm188r72a104ka35d 50( 1h ) grm188r71h221ka01d grm188r71h331ka01d grm188r71h471ka01d grm188r71h681ka01d grm188r71h102ka01d grm188r71h152ka01d grm188r71h222ka01d grm188r71h332ka01d grm188r71h472ka01d grm188r71h682ka01d grm188r71h103ka01d grm188r71h153ka01d grm188r71h223ka01d grm188r71h333ka61d grm188r71h473ka61d grm188r71h683ka93d grm188r71h104ka93d 25( 1e ) grm188r71e222ka01d grm188r71e332ka01d grm188r71e472ka01d grm188r71e682ka01d grm188r71e103ka01d grm188r71e153ka01d grm188r71e223ka01d grm188r71e333ka01d grm188r71e473ka01d grm188r71e683ka01d grm188r71e104ka01d grm188r71e154ka01d grm188r71e224ka88d grm188r71e474ka12d* grm188r71e105ka12d* 16( 1c ) grm188r71c154ka01d grm188r71c224ka01d grm188r71c334ka01d grm188r71c474ka88d grm188c71c684ka12d* grm188r71c105ka12d* 1.6x0.8( 18 )<0603> 220pf( 221 ) 330pf( 331 ) 470pf( 471 ) 680pf( 681 ) 1000pf( 102 ) 1500pf( 152 ) 2200pf( 222 ) 3300pf( 332 ) 4700pf( 472 ) 6800pf( 682 ) 10000pf( 103 ) 15000pf( 153 ) 22000pf( 223 ) 33000pf( 333 ) 47000pf( 473 ) 68000pf( 683 ) 0.10 f( 104 ) 0.15 f( 154 ) 0.22 f( 224 ) 0.33 f( 334 ) 0.47 f( 474 ) 0.68 f( 684 ) 1.0 f( 105 ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) lxw [mm] rated volt. [vdc] capacitance tolerance part number 10( 1a ) grm188r71a334ka61d grm188r71a474ka61d grm188r71a684ka61d grm188r71a105ka61d* grm188r71a225ke15d* 6.3( 0j ) grm188c70j225ke20d* 4( 0g ) grm188c70g225ke20d* 1.6x0.8( 18 )<0603> 0.33 f( 334 ) 0.47 f( 474 ) 0.68 f( 684 ) 1.0 f( 105 ) 2.2 f( 225 ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) high dielectric constant type x7r(r7)/x7s(c7) characteristics gr m 18 8 r7 2a 221 k a01 d packaging code in part number shows std 180mm reel taping. q product id w series e dimensions (lxw) r dimension (t) t temperature characteristics y rated voltage u capacitance i capacitance tolerance o individual specification code !0 packaging (part number) w q e r t y u i o !0 for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
39 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. the part number code is shown in ( ) and unit is shown in [ ]. < >: eia [inch] code * please refer to grm series specifications and test method (2). lxw [mm] rated volt. [vdc] capacitance tolerance part number 100( 2a ) grm219r72a682ka01d grm21br72a103ka01l grm21br72a153ka01l grm21br72a223ka01l grm21br72a333ka01l grm21br72a473ka01l grm21ar72a224kac5l grm21ar72a334kac5l grm21br72a474ka73l 50( 1h ) grm219r71h333ka01d grm21br71h473ka01l grm21br71h683ka01l grm21br71h104ka01l grm21br71h154ka01l grm21br71h224ka01l grm219r71h334ka88d grm21br71h474ka88l grm21br71h105ka12l 25( 1e ) grm219r71e683ka01d grm21br71e104ka01l grm21br71e154ka01l grm21br71e224ka01l grm21br71e334ka01l grm219r71e474ka88d grm219r71e684ka88d grm21br71e105ka99l grm219r71e105ka88d grm21br71e225ka73l* 16( 1c ) grm219r71c684ka01d grm21br71c105ka01l grm21br71c225ka12l grm21br71c475ka73l* 2.0x1.25( 21 )<0805> 6800pf( 682 ) 10000pf( 103 ) 15000pf( 153 ) 22000pf( 223 ) 33000pf( 333 ) 47000pf( 473 ) 68000pf( 683 ) 0.10 f( 104 ) 0.15 f( 154 ) 0.22 f( 224 ) 0.33 f( 334 ) 0.47 f( 474 ) 0.68 f( 684 ) 1.0 f( 105 ) 2.2 f( 225 ) 4.7 f( 475 ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) lxw [mm] rated volt. [vdc] capacitance tolerance part number 10( 1a ) grm21br71a225ka01l grm21br71a475ka73l* grm21br71a106ke51l* 6.3( 0j ) grm21br70j106ke76l* 4( 0g ) grm21be70g226me51l* 2.0x1.25( 21 )<0805> 2.2 f( 225 ) 4.7 f( 475 ) 10 f( 106 ) 22 f( 226 ) 10%( k ) 10%( k ) 10%( k ) 20%( m ) high dielectric constant type x7r(r7)/x7u(e7) characteristics for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
40 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. the part number code is shown in ( ) and unit is shown in [ ]. < >: eia [inch] code * please refer to grm series specifications and test method (2). lxw [mm] rated volt. [vdc] capacitance tolerance part number 100( 2a ) grm319r72a153ka01l grm31mr72a223ka01l grm31mr72a333ka01l grm31mr72a473ka01l grm31mr72a683ka01l grm319r72a104ka01d grm31mr72a154ka01l grm31mr72a224ka01l grm31mr72a474ka35l grm31mr72a684ka35l grm31cr72a105ka01l 50( 1h ) grm31mr71h154ka01l grm31mr71h224ka01l grm319r71h334ka01d grm31mr71h474ka01l grm31mr71h684ka88l grm31mr71h105ka88l grm31cr71h225ka88l grm31cr71h475ka12l 25( 1e ) grm319r71e334ka01d grm319r71e474ka01d grm319r71e684ka01d grm31mr71e225ka93l grm31cr71e475ka88l grm31cr71e106ka12l* 16( 1c ) grm31mr71c225ka35l grm31cr71c475ka01l grm31cr71c106kac7l* 3.2x1.6( 31 )<1206> 15000pf( 153 ) 22000pf( 223 ) 33000pf( 333 ) 47000pf( 473 ) 68000pf( 683 ) 0.10 f( 104 ) 0.15 f( 154 ) 0.22 f( 224 ) 0.33 f( 334 ) 0.47 f( 474 ) 0.68 f( 684 ) 1.0 f( 105 ) 2.2 f( 225 ) 4.7 f( 475 ) 10 f( 106 ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) lxw [mm] rated volt. [vdc] capacitance tolerance part number 10( 1a ) grm31cr71a106ka01l grm31cr71a226me15l* 6.3( 0j ) grm31cr70j226me19l* 4( 0g ) grm31ce70g476me15l* 3.2x1.6( 31 )<1206> 10 f( 106 ) 22 f( 226 ) 47 f( 476 ) 10%( k ) 20%( m ) 20%( m ) lxw [mm] rated volt. [vdc] capacitance tolerance part number 100( 2a ) grm32cr72a684ka01l grm32cr72a105ka35l grm32er72a225ka35l 50( 1h ) grm32er71h475ka88l 35( ya ) grm32er7ya106ka12l 25( 1e ) grm32dr71e106ka12l grm32er71e226me15l* 3.2x2.5( 32 )<1210> 0.68 f( 684 ) 1.0 f( 105 ) 2.2 f( 225 ) 4.7 f( 475 ) 10 f( 106 ) 22 f( 226 ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 20%( m ) lxw [mm] rated volt. [vdc] capacitance tolerance part number 16( 1c ) grm32er71c226mea8l* 10( 1a ) grm32er71a226me20l* grm32er71a476me15l* 6.3( 0j ) grm32er70j476me20l* 4( 0g ) grm32ee70g107me19l* 3.2x2.5( 32 )<1210> 22 f( 226 ) 47 f( 476 ) 100 f( 107 ) 20%( m ) 20%( m ) 20%( m ) high dielectric constant type x7r(r7)/x7u(e7) characteristics gr m 31 9 r7 2a 153 k a01 l packaging code in part number shows std 180mm reel taping. q product id w series e dimensions (lxw) r dimension (t) t temperature characteristics y rated voltage u capacitance i capacitance tolerance o individual specification code !0 packaging (part number) w q e r t y u i o !0 for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
41 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. lxw [mm] rated volt. [vdc] capacitance tolerance part number 50( 1h ) grm15xr71h221ka86d grm15xr71h331ka86d grm15xr71h471ka86d grm15xr71h681ka86d grm15xr71h102ka86d grm15xr71h152ka86d 25( 1e ) grm15xr71e222ka86d 16( 1c ) grm15xr71c332ka86d grm15xr71c472ka86d grm15xr71c682ka86d grm15xr71c103ka86d 1.0x0.5( 15 )<0402> 220pf( 221 ) 330pf( 331 ) 470pf( 471 ) 680pf( 681 ) 1000pf( 102 ) 1500pf( 152 ) 2200pf( 222 ) 3300pf( 332 ) 4700pf( 472 ) 6800pf( 682 ) 10000pf( 103 ) 1.0 f( 105 ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10( 1a ) grm185d71a105ke36d* 1.6x0.8( 18 )<0603> lxw [mm] rated volt. [vdc] capacitance tolerance part number 100( 2a ) grm219r72a682ka01d grm21ar72a224kac5l grm21ar72a334kac5l 50( 1h ) grm219r71h333ka01d grm219r71h334ka88d 25( 1e ) grm219r71e683ka01d grm219r71e474ka88d grm219r71e684ka88d grm219r71e105ka88d 16( 1c ) grm219r71c684ka01d 2.0x1.25( 21 )<0805> 6800pf( 682 ) 33000pf( 333 ) 68000pf( 683 ) 0.22 f( 224 ) 0.33 f( 334 ) 0.47 f( 474 ) 0.68 f( 684 ) 1.0 f( 105 ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) high dielectric constant type x7r(r7)/x7t(d7) characteristics-low profile lxw [mm] rated volt. [vdc] capacitance tolerance part number 100( 2a ) grm319r72a153ka01l grm31mr72a223ka01l grm31mr72a333ka01l grm31mr72a473ka01l grm31mr72a683ka01l grm319r72a104ka01d grm31mr72a154ka01l grm31mr72a224ka01l grm31mr72a474ka35l grm31mr72a684ka35l 50( 1h ) 25( 1e ) 16( 1c ) 3.2x1.6( 31 )<1206> 15000pf( 153 ) 22000pf( 223 ) 33000pf( 333 ) 47000pf( 473 ) 68000pf( 683 ) 0.10 f( 104 ) 0.15 f( 154 ) 0.22 f( 224 ) 0.33 f( 334 ) 0.47 f( 474 ) 0.68 f( 684 ) 1.0 f( 105 ) 2.2 f( 225 ) 4.7 f( 475 ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) grm31mr71h154ka01l grm31mr71h224ka01l grm319r71h334ka01d grm31mr71h474ka01l grm31mr71h684ka88l grm31mr71h105ka88l grm31mr71e225ka93l grm31mr71c225ka35l grm319d71c475ka12d* # the part number code is shown in ( ) and unit is shown in [ ]. < >: eia [inch] code * please refer to grm series specifications and test method (2). # these part numbers have individual testing conditions on durability of grm series specifications and test methods (2). please refer to p60. lxw [mm] rated volt. [vdc] capacitance tolerance part number 100( 2a ) grm32cr72a684ka01l grm32cr72a105ka35l grm32nr71h684ka01l 50( 1h ) 3.2x2.5( 32 )<1210> 0.68 f( 684 ) 1.0 f( 105 ) 10%( k ) 10%( k ) for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
42 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. the part number code is shown in ( ) and unit is shown in [ ]. < >: eia [inch] code * please refer to grm series specifications and test method (2). # these part numbers have individual testing conditions on durability of grm series specifications and test methods (2). please refer to p60. lxw [mm] rated volt. [vdc] capacitance tolerance part number 6.3( 0j ) grm033c80j153ke01d* grm033c80j223ke01d* grm033c80j333ke01d* grm033c80j473ke19d* grm033c80g153ke01d* grm033c80g223ke01d* grm033c80g333ke01d* grm033c80g473ke01d* 4( 0g ) 0.6x0.3( 03 )<0201> 15000pf( 153 ) 22000pf( 223 ) 33000pf( 333 ) 47000pf( 473 ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) lxw [mm] rated volt. [vdc] capacitance tolerance part number 25( 1e ) grm155c81e683ka12d grm155c81e104ka12d grm155c80j154ke01d* grm155c80j224ke01d* grm155c80j334ke01d* grm155c80j474ke19d* grm155c80j684ke15d* # grm155c80g154ke01d* grm155c80g224ke01d* grm155c80g334ke01d* grm155c80g474ke01d* grm155c80g684ke19d* 6.3( 0j )4( 0g ) 1.0x0.5( 15 )<0402> 68000pf( 683 ) 0.10 f( 104 ) 0.15 f( 154 ) 0.22 f( 224 ) 0.33 f( 334 ) 0.47 f( 474 ) 0.68 f( 684 ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) lxw [mm] rated volt. [vdc] capacitance tolerance part number 10( 1a ) grm188c81a225ke34d* 25( 1e ) grm188c81e105kaadd grm188c80j225ke19d* grm188c80g475ke19d* grm188c80g106me47d* # 6.3( 0j )4( 0g ) grm188c80e106me47d* 2.5( 0e ) 1.6x0.8( 18 )<0603> 1.0 f( 105 ) 2.2 f( 225 ) 4.7 f( 475 ) 10 f( 106 ) 10%( k ) 10%( k ) 10%( k ) 20%( m ) lxw [mm] rated volt. [vdc] capacitance tolerance part number 1.6x0.8( 18 )<0603> 10 f( 106 ) 20%( m ) lxw [mm] rated volt. [vdc] capacitance tolerance part number 25( 1e ) grm21bc81e475ka12l* 16( 1c ) 10( 1a ) 6.3( 0j ) 2.0x1.25( 21 )<0805> 1.0 f( 105 ) 2.2 f( 225 ) 4.7 f( 475 ) 10 f( 106 ) 22 f( 226 ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 20%( m ) lxw [mm] rated volt. [vdc] capacitance tolerance part number 4( 0g ) grm21bc80g226me39l* 2.0x1.25( 21 )<0805> 22 f( 226 ) 20%( m ) grm216c81c105ka12d* grm219c81c225ka12d* grm21bc81c475ka88l* grm219c81a475ke34d* grm21bc81a106ke18l* grm219c80j475ke19d* grm21bc80j106ke19l* grm219c80j106ke39d* grm21bc80j226me51l* # high dielectric constant type x6s(c8) characteristics gr m 03 3 c8 0j 153 k e01 d packaging code in part number shows std 180mm reel taping. q product id w series e dimensions (lxw) r dimension (t) t temperature characteristics y rated voltage u capacitance i capacitance tolerance o individual specification code !0 packaging (part number) w q e r t y u i o !0 for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
43 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. lxw [mm] rated volt. [vdc] capacitance tolerance part number 25( 1e ) grm31cc81e106ke15l* 16( 1c ) 10( 1a ) 6.3( 0j ) 3.2x1.6( 31 )<1206> 2.2 f( 225 ) 4.7 f( 475 ) 10 f( 106 ) 22 f( 226 ) 47 f( 476 ) 10%( k ) 10%( k ) 10%( k ) 20%( m ) 20%( m ) lxw [mm] rated volt. [vdc] capacitance tolerance part number 25( 1e ) grm32dc81e106ka12l grm32ec81e226me15l* 10( 1a ) 6.3( 0j ) 3.2x2.5( 32 )<1210> 10 f( 106 ) 22 f( 226 ) 47 f( 476 ) 100 f( 107 ) 10%( k ) 20%( m ) 20%( m ) 20%( m ) lxw [mm] rated volt. [vdc] capacitance tolerance part number 4( 0g ) grm31cc80g476me19l* grm31cd80g107me39l* grm316c81c225ka12d* grm319c81c475ka12d* grm31mc81c106ka12l grm32nc81a226me19l* grm32ec81a476me19l* grm319c81a106ka12d grm31cc81a226me19l* grm32ec80j476me64l* grm32ec80j107me20l* 4( 0g ) grm32ec80g107me20l* grm319c80j106ke19d* grm31cc80j226me19l* grm31cc80j476me18l* 3.2x1.6( 31 )<1206> 47 f( 476 ) 100 f( 107 ) 20%( m ) 20%( m ) the part number code is shown in ( ) and unit is shown in [ ]. < >: eia [inch] code *: please refer to grm series specifications and test method(2). high dielectric constant type x6s(c8)/x6t(d8) characteristics lxw [mm] rated volt. [vdc] capacitance tolerance part number 10( 1a ) grm185c81a105ke36d* 6.3( 0j ) 1.6x0.8( 18 )<0603> 1.0 f( 105 ) 10%( k ) lxw [mm] rated volt. [vdc] capacitance tolerance part number 16( 1c ) grm316c81c225ka12d* grm319c81c475ka12d* lxw [mm] rated volt. [vdc] capacitance tolerance part number 16( 1c ) grm216c81c105ka12d* grm219c81c225ka12d* grm185c80j105ke26d* grm219c81a475ke34d* grm219c80j475ke19d* grm219c80j106ke39d* 10( 1a ) 6.3( 0j ) 2.0x1.25( 21 )<0805> 1.0 f( 105 ) 2.2 f( 225 ) 4.7 f( 475 ) 10 f( 106 ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 3.2x1.6( 31 )<1206> 2.2 f( 225 ) 4.7 f( 475 ) 10%( k ) 10%( k ) lxw [mm] rated volt. [vdc] capacitance tolerance part number 25( 1e ) grm32dc81e106ka12l 3.2x2.5( 32 )<1210> 10 f( 106 ) 10%( k ) the part number code is shown in ( ) and unit is shown in [ ]. < >: eia [inch] code * please refer to grm series specifications and test method (2). high dielectric constant type x6s(c8) characteristics-low profile for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
44 ! note ?please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. ?this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. lxw [mm] rated volt. [vdc] capacitance tolerance part number 10( 1a ) grm022r61a680ka01l grm022r61a101ka01l grm022r61a151ka01l grm022r61a221ka01l grm022r61a331ka01l grm022r61a471ka01l grm022r61a681ke19l* grm022r61a102ke19l* grm022r61a152ke19l* grm022r61a222ke19l* grm022r61a332ke19l* grm022r61a472ke19l* grm022r61a682ke19l* grm022r61a103ke19l* 6.3( 0j ) 0.4x0.2( 02 )<01005> 68pf( 680 ) 100pf( 101 ) 150pf( 151 ) 220pf( 221 ) 330pf( 331 ) 470pf( 471 ) 680pf( 681 ) 1000pf( 102 ) 1500pf( 152 ) 2200pf( 222 ) 3300pf( 332 ) 4700pf( 472 ) 6800pf( 682 ) 10000pf( 103 ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) lxw [mm] rated volt. [vdc] capacitance tolerance part number 25( 1e ) grm033r61a152ka01d grm033r61a222ka01d grm033r61a332ka01d grm033r61a472ka01d grm033r61a682ka01d grm033r61a103ka01d grm033r60j103ka01d grm033r60j153ke01d* grm033r60j223ke01d* grm033r60j333ke01d* grm033r60j473ke19d* grm022r60j681ke19l* grm022r60j102ke19l* grm022r60j152ke19l* grm022r60j222ke19l* grm022r60j332ke19l* grm022r60j472ke19l* grm022r60j682ke19l* grm022r60j103ke19l* 16( 1c ) 10( 1a ) 6.3( 0j ) 0.6x0.3( 03 )<0201> 100pf( 101 ) 150pf( 151 ) 220pf( 221 ) 330pf( 331 ) 470pf( 471 ) 680pf( 681 ) 1000pf( 102 ) 1500pf( 152 ) 2200pf( 222 ) 3300pf( 332 ) 4700pf( 472 ) 6800pf( 682 ) 10000pf( 103 ) 15000pf( 153 ) 22000pf( 223 ) 33000pf( 333 ) 47000pf( 473 ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) the part number code is shown in ( ) and unit is shown in [ ]. < >: eia [inch] code : please refer to x7r(r7) etc. characteristics. * please refer to grm series specifications and test method (2). high dielectric constant type x5r(r6) characteristics gr m 02 2 r6 1a 680 k a01 l packaging code in part number shows std 180mm reel taping. q product id w series e dimensions (lxw) r dimension (t) t temperature characteristics y rated voltage u capacitance i capacitance tolerance o individual specification code !0 packaging* (part number) w q e r t y u i o !0 * grm022 : d is applicable. for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
45 ! note ?please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. ?this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. lxw [mm] rated volt. [vdc] capacitance tolerance part number 100( 2a ) grm155r61e683ka87d grm155r61e104ka87d grm155r61c223ka01d grm155r61c333ka01d grm155r61c473ka01d grm155r61c683ka88d grm155r61c104ka88d 50( 1h ) 25( 1e ) 16( 1c ) 1.0x0.5( 15 )<0402> 220pf( 221 ) 330pf( 331 ) 470pf( 471 ) 680pf( 681 ) 1000pf( 102 ) 1500pf( 152 ) 2200pf( 222 ) 3300pf( 332 ) 4700pf( 472 ) 6800pf( 682 ) 10000pf( 103 ) 15000pf( 153 ) 22000pf( 223 ) 33000pf( 333 ) 47000pf( 473 ) 68000pf( 683 ) 0.10 f( 104 ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) lxw [mm] rated volt. [vdc] capacitance tolerance part number 10( 1a ) grm155r61h102ka01d grm155r61h222ka01d grm155r61h472ka01d grm155r60j154ke01d* grm155r60j224ke01d* grm155r60j334ke01d* grm155r60j474ke19d* grm155r60j684ke19d* grm155r61a333ka01d grm155r61a473ka01d grm155r61a683ka01d grm155r61a104ka01d grm155r61a154ke19d* grm155r61a224ke19d* grm155r61a334ke15d* grm155r61a474ke15d* grm155r61a684ke15d* grm155r61a105ke15d* 6.3( 0j ) 1.0x0.5( 15 )<0402> 33000pf( 333 ) 47000pf( 473 ) 68000pf( 683 ) 0.10 f( 104 ) 0.15 f( 154 ) 0.22 f( 224 ) 0.33 f( 334 ) 0.47 f( 474 ) 0.68 f( 684 ) 1.0 f( 105 ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) the part number code is shown in ( ) and unit is shown in [ ]. < >: eia [inch] code : please refer to x7r(r7) etc. characteristics. * please refer to grm series specifications and test method (2). high dielectric constant type x5r(r6) characteristics for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
46 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. lxw [mm] rated volt. [vdc] capacitance tolerance part number 100( 2a ) grm188r61c224ka88d grm188r61c474ka93d* grm188r61c105ka93d* grm188r61c225ke15d* grm188r61e104ka01d grm188r61e224ka88d grm188r61e474ka12d* grm188r61e105ka12d* grm188r61h102ka01d grm188r61h222ka01d grm188r61h472ka01d grm188r61h103ka01d grm188r61h223ka01d 50( 1h ) 25( 1e ) 16( 1c ) 1.6x0.8( 18 )<0603> 220pf( 221 ) 330pf( 331 ) 470pf( 471 ) 680pf( 681 ) 1000pf( 102 ) 1500pf( 152 ) 2200pf( 222 ) 3300pf( 332 ) 4700pf( 472 ) 6800pf( 682 ) 10000pf( 103 ) 15000pf( 153 ) 22000pf( 223 ) 33000pf( 333 ) 47000pf( 473 ) 68000pf( 683 ) 0.10 f( 104 ) 0.15 f( 154 ) 0.22 f( 224 ) 0.33 f( 334 ) 0.47 f( 474 ) 1.0 f( 105 ) 2.2 f( 225 ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) lxw [mm] rated volt. [vdc] capacitance tolerance part number 10( 1a ) grm188r61a684ka61d grm188r61a225ke34d* grm188r60j475ke19d* grm188r60j106me47d* grm188r60g106me47d* grm188r60g226mea0l* 6.3( 0j )4( 0g ) 1.6x0.8( 18 )<0603> 0.68 f( 684 ) 2.2 f( 225 ) 4.7 f( 475 ) 10 f( 106 ) 22 f( 226 ) 10%( k ) 10%( k ) 10%( k ) 20%( m ) 20%( m ) the part number code is shown in ( ) and unit is shown in [ ]. < >: eia [inch] code : please refer to x7r(r7) etc. characteristics. * please refer to grm series specifications and test method (2). high dielectric constant type x5r(r6) characteristics gr m 18 8 r6 1h 102 k a01 d packaging code in part number shows std 180mm reel taping. q product id w series e dimensions (lxw) r dimension (t) t temperature characteristics y rated voltage u capacitance i capacitance tolerance o individual specification code !0 packaging (part number) w q e r t y u i o !0 for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
47 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. lxw [mm] rated volt. [vdc] capacitance tolerance part number 100( 2a ) 50( 1h ) 25( 1e ) 16( 1c ) 2.0x1.25( 21 )<0805> 6800pf( 682 ) 10000pf( 103 ) 15000pf( 153 ) 22000pf( 223 ) 33000pf( 333 ) 47000pf( 473 ) 68000pf( 683 ) 0.10 f( 104 ) 0.15 f( 154 ) 0.22 f( 224 ) 0.33 f( 334 ) 0.47 f( 474 ) 0.68 f( 684 ) 1.0 f( 105 ) 2.2 f( 225 ) 4.7 f( 475 ) 10 f( 106 ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) lxw [mm] rated volt. [vdc] capacitance tolerance part number 10( 1a ) grm21br61a225ka01l grm21br61a475ka73l* grm219r61a475ke34d* grm21br61a106ke19l* grm219r61a106ke44d* grm21br60j475ka11l* grm21br60j106ke19l* grm219r60j106ke19d* grm21br60j226me39l* grm219r60g226me66d* grm216r61e105ka12d grm21br61e225ka12l grm219r61e225ka12d* grm21br61e475ka12l* grm21br61c105ka01l grm216r61c105ka88d* grm21br61c225ka88l* grm219r61c225ka88d* grm21br61c475ka88l* grm219r61c475ke15d* grm21br61c106ke15l* 6.3( 0j )4( 0g ) 2.0x1.25( 21 )<0805> 2.2 f( 225 ) 4.7 f( 475 ) 10 f( 106 ) 22 f( 226 ) 10%( k ) 10%( k ) 10%( k ) 20%( m ) the part number code is shown in ( ) and unit is shown in [ ]. < >: eia [inch] code : please refer to x7r(r7) etc. characteristics. * please refer to grm series specifications and test method (2). high dielectric constant type x5r(r6) characteristics for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
48 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. lxw [mm] rated volt. [vdc] capacitance tolerance part number 100( 2a ) 50( 1h ) 25( 1e ) 16( 1c ) 3.2x1.6( 31 )<1206> 15000pf( 153 ) 22000pf( 223 ) 33000pf( 333 ) 47000pf( 473 ) 68000pf( 683 ) 0.10 f( 104 ) 0.15 f( 154 ) 0.22 f( 224 ) 0.33 f( 334 ) 0.47 f( 474 ) 0.68 f( 684 ) 1.0 f( 105 ) 2.2 f( 225 ) 4.7 f( 475 ) 10 f( 106 ) 22 f( 226 ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 20%( m ) lxw [mm] rated volt. [vdc] capacitance tolerance part number 10( 1a ) grm319r61a106ke19l* grm31cr61a226me19l* grm31cr61a476me15l* grm31cr60j226me19l* grm31cr60j476me19l* grm31cr60j107me39l* grm31cr61h225ka88l grm31cr60g107me39l* grm316r61e225ka12d* grm31cr61e475ka88l grm319r61e475ka12d* grm31cr61e106ka12l* grm31cr61c475ka01l grm319r61c475ka88d* grm31cr61c106ka88l grm319r61c106ke15d* grm31cr61c226me15l* 6.3( 0j )4( 0g ) 3.2x1.6( 31 )<1206> 10 f( 106 ) 22 f( 226 ) 47 f( 476 ) 100 f( 107 ) 10%( k ) 20%( m ) 20%( m ) 20%( m ) lxw [mm] rated volt. [vdc] capacitance tolerance part number 100( 2a ) 50( 1h ) 35( ya ) 25( 1e ) 3.2x2.5( 32 )<1210> 0.68 f( 684 ) 1.0 f( 105 ) 2.2 f( 225 ) 4.7 f( 475 ) 10 f( 106 ) 22 f( 226 ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 20%( m ) lxw [mm] rated volt. [vdc] capacitance tolerance part number 16( 1c ) grm32er61c476me15l* grm32er61a476me20l* grm32er60j107me20l* grm32er6ya106ka12l grm32dr61e106ka12l grm32er61e226me15l* 10( 1a ) 6.3( 0j ) 3.2x2.5( 32 )<1210> 22 f( 226 ) 47 f( 476 ) 100 f( 107 ) 20%( m ) 20%( m ) 20%( m ) the part number code is shown in ( ) and unit is shown in [ ]. < >: eia [inch] code : please refer to x7r(r7) etc. characteristics. * please refer to grm series specifications and test method (2). high dielectric constant type x5r(r6) characteristics gr m 31 c r6 1h 225 k a88 l packaging code in part number shows std 180mm reel taping. q product id w series e dimensions (lxw) r dimension (t) t temperature characteristics y rated voltage u capacitance i capacitance tolerance o individual specification code !0 packaging (part number) w q e r t y u i o !0 for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
49 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. lxw [mm] rated volt. [vdc] capacitance tolerance part number 16( 1c ) 25( 1e ) 16( 1c ) 1.0x0.5( 15 )<0402> 220pf( 221 ) 330pf( 331 ) 470pf( 471 ) 680pf( 681 ) 1000pf( 102 ) 1500pf( 152 ) 2200pf( 222 ) 3300pf( 332 ) 4700pf( 472 ) 6800pf( 682 ) 10000pf( 103 ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) lxw [mm] rated volt. [vdc] capacitance tolerance part number 16( 1c ) grm185r61c105ke44d* grm185r61a105ke36d* 10( 1a ) 1.6x0.8( 18 )<0603> 1.0 f( 105 ) 10%( k ) lxw [mm] rated volt. [vdc] capacitance tolerance part number 100( 2a ) 50( 1h ) 25( 1e ) 16( 1c ) 2.0x1.25( 21 )<0805> 6800pf( 682 ) 33000pf( 333 ) 68000pf( 683 ) 0.22 f( 224 ) 0.33 f( 334 ) 0.47 f( 474 ) 0.68 f( 684 ) 1.0 f( 105 ) 2.2 f( 225 ) 4.7 f( 475 ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) lxw [mm] rated volt. [vdc] capacitance tolerance part number 10( 1a ) grm219r61a475ke34d* grm219r61a106ke44d* grm219r60j106ke19d* grm216r61e105ka12d grm219r61e225ka12d* grm216r61c105ka88d grm219r61c225ka88d* grm219r61c475ke15d* 6.3( 0j ) grm219r60g226me66d* 4( 0g ) 2.0x1.25( 21 )<0805> 4.7 f( 475 ) 10 f( 106 ) 22 f( 226 ) 10%( k ) 10%( k ) 20%( m ) the part number code is shown in ( ) and unit is shown in [ ]. < >: eia [inch] code : please refer to x7r(r7) etc. characteristics. * please refer to grm series specifications and test method (2). high dielectric constant type x5r(r6) characteristics-low profile for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
50 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. lxw [mm] rated volt. [vdc] capacitance tolerance part number 100( 2a ) 50( 1h ) 25( 1e ) 16( 1c ) 3.2x1.6( 31 )<1206> 15000pf( 153 ) 22000pf( 223 ) 33000pf( 333 ) 47000pf( 473 ) 68000pf( 683 ) 0.10 f( 104 ) 0.15 f( 154 ) 0.22 f( 224 ) 0.33 f( 334 ) 0.47 f( 474 ) 0.68 f( 684 ) 1.0 f( 105 ) 2.2 f( 225 ) 4.7 f( 475 ) 10 f( 106 ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) lxw [mm] rated volt. [vdc] capacitance tolerance part number 100( 2a ) grm32dr61e106ka12l grm316r61e225ka12d* grm319r61e475ka12d* grm319r61c475ka88d* grm319r61c106ke15d* 50( 1h ) 25( 1e ) 3.2x2.5( 32 )<1210> 0.68 f( 684 ) 1.0 f( 105 ) 10 f( 106 ) 10%( k ) 10%( k ) 10%( k ) lxw [mm] rated volt. [vdc] capacitance tolerance part number 10( 1a ) grm319r61a106ke19d* 3.2x1.6( 31 )<1206> 10 f( 106 ) 10%( k ) the part number code is shown in ( ) and unit is shown in [ ]. < >: eia [inch] code : please refer to x7r(r7) etc. characteristics. * please refer to grm series specifications and test method (2). high dielectric constant type x5r(r6) characteristics-low profile gr m 31 6 r6 1e 225 k a12 d packaging code in part number shows std 180mm reel taping. q product id w series e dimensions (lxw) r dimension (t) t temperature characteristics y rated voltage u capacitance i capacitance tolerance o individual specification code !0 packaging (part number) w q e r t y u i o !0 for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
continued on the following page. 8 q/ dissipation factor (d.f.) 30pf and over: q u 1000 30pf and below: q u 400+20c c: nominal capacitance (pf) [r6, r7, c8] w.v.: 100v : 0.025 max. (c f 0.068 f) : 0.05 max. (c u 0.068 f) w.v.: 50/35/25v: : 0.025 max.* * grm32d r7/r6/c8 1e106: 0.035 max. w.v.: 16/10v: 0.035 max. w.v.: 6.3/4v : 0.05 max. (c f 3.3 f) : 0.1 max. (c u 3.3 f) [e4] w.v.: 25vmin: 0.025 max. [f1, f5] w.v.: 25v min. : 0.05 max. (c f 0.1 f) : 0.09 max. (c u 0.1 f) w.v.: 16/10v: 0.125 max. w.v.: 6.3v: 0.15 max. the capacitance/q/d.f. should be measured at 20/25 c at the frequency and voltage shown in the table. 7 capacitance within the specified tolerance the insulation resistance should be measured with a dc voltage not exceeding the rated voltage at 20/25 c and 75%rh max. and within 2 minutes of charging, provided the charge/ discharge current is less than 50ma. 6 insulation resistance c v 0.047 f: more than 10,000m c g 0.047 f: more than 500 ?f c: nominal capacitance no failure should be observed when 300%* of the rated voltage (temperature compensating type) or 250% of the rated voltage (high dielectric constant type) is applied between the terminations for 1 to 5 seconds, provided the charge/discharge current is less than 50ma. *200% for 500v 5 dielectric strength no defects or abnormalities using calipers (grm02 size is based on microscope) 4 dimensions within the specified dimensions visual inspection 3 appearance no defects or abnormalities the rated voltage is defined as the maximum voltage that may be applied continuously to the capacitor. when ac voltage is superimposed on dc voltage, v p-p or v o-p , whichever is larger, should be maintained within the rated voltage range. 2 rated voltage see the previous pages. reference temperature: 25 c (2 ? , 3 ? , 4 ? , b1, b3, f1, r1: 20 c) 1 operating temperature range ?5 to +125 c (2p/r/s/t, 3p/r/s/t/u, 4p/r/s/t/u: ?5 to +85 c) b1, b3, f1: ?5 to +85 c r1, r7: ?5 to +125 c r6: ?5 to +85 c c8: ?5 to +105 c e4: +10 to +85 c f5: ?0 to +85 c no. test method specifications temperature compensating type high dielectric type item ? c to 7u, 1x (1000pf and below) char. item 1 0.1mhz 0.5 to 5vrms ? c to 7u, 1x (more than 1000pf) r6, r7, c8, f5, b1, b3, f1 1 0.1khz 1 0.2vrms r6, r7, f5 (c>10 f) 120 24hz 0.5 0.1vrms e4 1 0.1khz 0.5 0.05vrms frequency voltage grm series specifications and test methods (1) (note 1)-typical inspection grm series specifications and test methods (1) (note 1)-typical inspection 51 ! note ?please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. ?this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. (note 1) these specifications and test methods indicate typical inspection. please refer to individual specifications (our product specifications or the approval sheet). when no "*" is added in pns table, please refer to grm series specifications and test methods (1). when "*" is added in pns table, please refer to grm series specifications and test methods (2). for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
continued from the preceding page. continued on the following page. temperature ( ? c) step reference temperature 2 e55 3 (for ? c to 7u/r6/r7/c8) e30 3 (for f5), 10 3 (for e4) e25 3 (for other tc) reference temperature 2 125 3 (for ? c/r7), 105 3 (for c8) 85 3 (for other tc) reference temperature 2 1 2 3 4 5 temperature ( ? c) step reference temperature 2 e55 3 (for c8, r1, r7, r6) e25 3 (for b1, b3, f1) e30 3 (for f5)/10 3 (for e4) reference temperature 2 125 3 (for r1, r7)/ 85 3 (for b1, b3, r6 f1, f5, e4)/105 3 (for c8) reference temperature 2 e55 3 (for r1)/ e25 3 (for b1, f1) reference temperature 2 125 3 (for r1)/ 85 3 (for b1, f1) applying voltage (v) no bias 50% of the rated voltage 1 2 3 4 5 6 7 8 a type 0.2 0.3 0.4 1.0 1.2 2.2 2.2 3.5 4.5 b 0.56 0.9 1.5 3.0 4.0 5.0 5.0 7.0 8.0 c 0.23 0.3 0.5 1.2 1.65 2.0 2.9 3.7 5.6 grm02 grm03 grm15 grm18 grm21 grm31 grm32 grm43 grm55 solder the capacitor to the test jig (glass epoxy board) shown in fig. 1a using a eutectic solder. then apply 10n* force in parallel with the test jig for 10 1 sec. the soldering should be done either with an iron or using the reflow method and should be conducted with care so that the soldering is uniform and free of defects such as heat shock. *1n (grm02), 2n (grm03), 5n (grm15, grm18) (in mm) 10 adhesive strength of termination no removal of the terminations or other defect should occur. fig. 1a the capacitance change should be measured after 5 min. at each specified temp. stage. (1)temperature compensating type the temperature coefficient is determined using the capacitance measured in step 3 as a reference. when cycling the temperature sequentially from steps 1 through 5 (5c: +25 to +125 ? c/ ? c: +20 to +125 ? c: other temp. coeffs.: +25 to +85 ? c/+20 to +85 ? c) the capacitance should be within the specified tolerance for the temperature coefficient and capacitance change as in table a-1. the capacitance drift is calculated by dividing the differences between the maximum and minimum measured values in the steps 1, 3 and 5 by the cap. value in step 3. (2) high dielectric constant type the ranges of capacitance change compared with the reference temperature value over the temperature ranges shown in the table should be within the specified ranges.* when applying voltage, the capacitance change should be measured after 1 more min. with applying voltage in equilibration of each temp. stage. 9 capacitance temperature characteristics no bias within the specified tolerance (table a-1) b1, b3: within 10% (e25 to +85 ? c) r1, r7: within 15% (e55 to +125 ? c) r6: within 15% (e55 to +85 ? c) e4: within +22/e56% (+10 to +85 ? c) f1: within +30/e80% (e25 to +85 ? c) f5: within +22/e82% (e30 to +85 ? c) c8: within 22% (e55 to +105 ? c) 50% of the rated voltage b1: within +10/e30% r1: within +15/e40% f1: within +30/e95% capacitance drift within 0.2% or 0.05pf (whichever is larger.) *do not apply to 1x/25v *initial measurement for high dielectric constant type perform a heat treatment at 150+0/e10 ? c for one hour and then set for 24 2 hours at room temperature. perform the initial measurement. no. test method specifications temperature compensating type high dielectric type item a b c baked electrode or copper foil solder resist grm series specifications and test methods (1) (note 1)-typical inspection grm series specifications and test methods (1) (note 1)-typical inspection 52 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. (note 1) these specifications and test methods indicate typical inspection. please refer to individual specifications (our product specifications or the approval sheet). when no "*" is added in pns table, please refer to grm series specifications and test methods (1). when "*" is added in pns table, please refer to grm series specifications and test methods (2). for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
immerse the capacitor in a solution of ethanol (jis-k-8101) and rosin (jis-k-5902) (25% rosin in weight proportion). preheat at 80 to 120 c for 10 to 30 seconds. after preheating, immerse in a eutectic solder solution for 2 0.5 seconds at 230 5 c or sn-3.0ag-0.5cu solder solution for 2 0.5 seconds at 245 5 c. 13 solderability of termination 75% of the terminations are to be soldered evenly and continuously. continued from the preceding page. continued on the following page. solder the capacitor on the test jig (glass epoxy board) shown in fig. 2a using a eutectic solder. then apply a force in the direction shown in fig. 3a for 5 1 sec. the soldering should be done by the reflow method and should be conducted with care so that the soldering is uniform and free of defects such as heat shock. fig. 2a (in mm) 12 deflection appearance no marking defects capacitance change within 5% or 0.5pf (whichever is larger) within 10% fig. 3a solder the capacitor on the test jig (glass epoxy board) in the same manner and under the same conditions as (10). the capacitor should be subjected to a simple harmonic motion having a total amplitude of 1.5mm, the frequency being varied uniformly between the approximate limits of 10 and 55hz. the frequency range, from 10 to 55hz and return to 10hz, should be traversed in approximately 1 minute. this motion should be applied for a period of 2 hours in each of 3 mutually perpendicular directions (total of 6 hours). 11 vibration resistance appearance no defects or abnormalities capacitance within the specified tolerance q/d.f. 30pf and over: q u 1000 30pf and below: q u 400+20c c: nominal capacitance (pf) [b1, b3, r6, r7, c8] w.v.: 100v : 0.025 max. (c f 0.068 f) : 0.05 max. (c u 0.068 f) w.v.: 50/35/25v: : 0.025 max.* * grm32d r7/r6/c8 1e106: 0.035 max. w.v.: 16/10v: 0.035 max. w.v.: 6.3/4v : 0.05 max. (c f 3.3 f) : 0.1 max. (c u 3.3 f) [e4] w.v.: 25vmin: 0.025 max. [f1, f5] w.v.: 25v min. : 0.05 max. (c f 0.1 f) : 0.09 max. (c u 0.1 f) w.v.: 16/10v: 0.125 max. w.v.: 6.3v: 0.15 max. capacitance meter flexure : v 1 20 50 r230 pressurizing speed: 1.0mm/sec. pressurize 45 45 u v z | ? r v w b q tu v w xy \ | ?a -
q r s v z [ ] ^ _ ` ? ? ? q t q ] ? a q q r u | c s w v z ? 100 t: 1.6mm (grm02/03/15: t: 0.8mm)
z [ ? ? _ ` 40 f 4.5 a type 0.2 0.3 0.4 1.0 1.2 2.2 2.2 3.5 4.5 b 0.56 0.9 1.5 3.0 4.0 5.0 5.0 7.0 8.0 c 0.23 0.3 0.5 1.2 1.65 2.0 2.9 3.7 5.6 grm02 grm03 grm15 grm18 grm21 grm31 grm32 grm43 grm55 no. test method specifications temperature compensating type high dielectric type item grm series specifications and test methods (1) (note 1)-typical inspection grm series specifications and test methods (1) (note 1)-typical inspection 53 ! note ?please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. ?this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. (note 1) these specifications and test methods indicate typical inspection. please refer to individual specifications (our product specifications or the approval sheet). when no "*" is added in pns table, please refer to grm series specifications and test methods (1). when "*" is added in pns table, please refer to grm series specifications and test methods (2). for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
continued from the preceding page. continued on the following page. temperature step 100 to 120 ? c 170 to 200 ? c time 1 min. 1 min. 1 2 1 step min. operating temp. +0/e3 30 3 2 room temp. 2 to 3 3 max. operating temp. +3/e0 30 3 4 room temp. 2 to 3 temp. ( ? c) time (min.) fix the capacitor to the supporting jig in the same manner and under the same conditions as (10). perform the five cycles according to the four heat treatments shown in the following table. set for 24 2 hours at room temperature, then measure. initial measurement for high dielectric constant type perform a heat treatment at 150+0/e10 ? c for one hour and then set at room temperature for 24 2 hours. perform the initial measurement. 15 temperature cycle the measured and observed characteristics should satisfy the specifications in the following table. appearance no defects or abnormalities capacitance change within 2.5% or 0.25pf (whichever is larger) b1, b3, r1, r6, r7, c8: within 7.5% f1, f5, e4: within 20% q/d.f. 30pf and over: q u 1000 30pf and below: q u 400+20c c: nominal capacitance (pf) [b1, b3, r6, r7, c8] w.v.: 100v : 0.025 max. (c f 0.068 f) : 0.05 max. (c u 0.068 f) w.v.: 50/35/25v: : 0.025 max.* * grm32d r7/r6/c8 1e106: 0.035 max. w.v.: 16/10v: 0.035 max. w.v.: 6.3/4v : 0.05 max. (c f 3.3 f) : 0.1 max. (c u 3.3 f) [e4] w.v.: 25vmin: 0.05 max. [f1, f5] w.v.: 25v min. : 0.05 max. (c f 0.1 f) : 0.09 max. (c u 0.1 f) w.v.: 16/10v: 0.125 max. w.v.: 6.3v: 0.15 max. i.r. more than 10,000m ? or 500 ? f (whichever is smaller) dielectric strength no defects preheat the capacitor at 120 to 150 ? c for 1 minute. immerse the capacitor in a eutectic solder or sn-3.0ag-0.5cu solder solution at 270 5 ? c for 10 0.5 seconds. set at room temperature for 24 2 hours, then measure. initial measurement for high dielectric constant type perform a heat treatment at 150+0/e10 ? c for one hour and then set at room temperature for 24 2 hours. perform the initial measurement. preheating for grm32/43/55 14 resistance to soldering heat the measured and observed characteristics should satisfy the specifications in the following table. appearance no defects or abnormalities capacitance change within 2.5% or 0.25pf (whichever is larger) b1, b3, r1, r6, r7, c8: within 7.5% f1, f5, e4: within 20% q/d.f. 30pf and over: q u 1000 30pf and below: q u 400+20c c: nominal capacitance (pf) [b1, b3, r6, r7, c8] w.v.: 100v : 0.025 max. (c f 0.068 f) : 0.05 max. (c u 0.068 f) w.v.: 50/35/25v: : 0.025 max.* * grm32d r7/r6/c8 1e106: 0.035 max. w.v.: 16/10v: 0.035 max. w.v.: 6.3/4v : 0.05 max. (c f 3.3 f) : 0.1 max. (c u 3.3 f) [e4] w.v.: 25vmin: 0.025 max. [f1, f5] w.v.: 25v min. : 0.05 max. (c f 0.1 f) : 0.09 max. (c u 0.1 f) w.v.: 16/10v: 0.125 max. w.v.: 6.3v: 0.15 max. i.r. more than 10,000m ? or 500 ? f (whichever is smaller) dielectric strength no defects no. test method specifications temperature compensating type high dielectric type item grm series specifications and test methods (1) (note 1)-typical inspection grm series specifications and test methods (1) (note 1)-typical inspection 54 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. (note 1) these specifications and test methods indicate typical inspection. please refer to individual specifications (our product specifications or the approval sheet). when no "*" is added in pns table, please refer to grm series specifications and test methods (1). when "*" is added in pns table, please refer to grm series specifications and test methods (2). for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
continued from the preceding page. continued on the following page. apply the rated voltage at 40 2 ? c and 90 to 95% humidity for 500 12 hours. remove and set for 24 2 hours at room temperature, then measure. the charge/discharge current is less than 50ma. initial measurement for f1, f5/10v max. apply the rated dc voltage for 1 hour at 40 2 ? c. remove and set for 24 2 hours at room temperature. perform initial measurement. 17 humidity load the measured and observed characteristics should satisfy the specifications in the following table. appearance no defects or abnormalities capacitance change within 7.5% or 0.75pf (whichever is larger) b1, b3, r1, r6, r7, c8: within 12.5% f1, f5, e4: within 30% [w.v.: 10v max.] f1, f5: within +30/e40% q/d.f. 30pf and over: q u 200 30pf and below: q u 100+10c/3 c: nominal capacitance (pf) [b1, b3, r6, r7, c8] w.v.: 100v : 0.05 max. (c f 0.068 f) : 0.075 max. (c u 0.068 f) w.v.: 50/35/25/16/10v : 0.05 max. w.v.: 6.3/4v : 0.075 max. (c f 3.3 f) : 0.125 max. (c u 3.3 f) [e4] w.v.: 25vmin: 0.05 max. [f1, f5] w.v.: 25v min. : 0.075 max. (c f 0.1 f) : 0.125 max. (c u 0.1 f) w.v.: 16/10v: 0.15 max. w.v.: 6.3v: 0.2 max. i.r. more than 500m ? or 25 ? f (whichever is smaller) set the capacitor at 40 2 ? c and in 90 to 95% humidity for 500 12 hours. remove and set for 24 2 hours at room temperature, then measure. 16 humidity (steady state) the measured and observed characteristics should satisfy the specifications in the following table. appearance no defects or abnormalities capacitance change within 5% or 0.5pf (whichever is larger) b1, b3, r1, r6, r7, c8: within 12.5% f1, f5, e4: within 30% q/d.f. 30pf and over: q u 350 10pf and over 30pf and below: q u 275+2.5c 10pf and below: q u 200+10c c: nominal capacitance (pf) [r6, r7, c8] w.v.: 100v : 0.05 max. (c f 0.068 f) : 0.075 max. (c u 0.068 f) w.v.: 50/35/25/16/10v : 0.05 max. w.v.: 6.3/4v : 0.075 max. (c f 3.3 f) : 0.125 max. (c u 3.3 f) [e4] w.v.: 25vmin: 0.05 max. [f1, f5] w.v.: 25v min. : 0.075 max. (c f 0.1 f) : 0.125 max. (c u 0.1 f) w.v.: 16/10v: 0.15 max. w.v.: 6.3v: 0.2 max. i.r. more than 1,000m ? or 50 ? f (whichever is smaller) no. test method specifications temperature compensating type high dielectric type item grm series specifications and test methods (1) (note 1)-typical inspection grm series specifications and test methods (1) (note 1)-typical inspection 55 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. (note 1) these specifications and test methods indicate typical inspection. please refer to individual specifications (our product specifications or the approval sheet). when no "*" is added in pns table, please refer to grm series specifications and test methods (1). when "*" is added in pns table, please refer to grm series specifications and test methods (2). for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
*1: nominal values denote the temperature coefficient within a range of 25 ? c to 125 ? c (for ? c)/85 ? c (for other tc). continued from the preceding page. apply 200%* of the rated voltage at the maximum operating temperature 3 ? c for 1000 12 hours. set for 24 2 hours at room temperature, then measure. the charge/discharge current is less than 50ma. initial measurement for high dielectric constant type. apply 200% of the rated voltage* at the maximum operating temperature 3 ? c for one hour. remove and set for 24 2 hours at room temperature. perform initial measurement. *grm155c81e 683/104, grm188c81e105, grm188c81e105, grm21br71h105, grm21br72a474, grm21br71c225, grm31cr71h475, grm32e r6/r7 ya106, grm32d r7/r6/c8 1e106 : 150% of the rated voltage. 18 high temperature load the measured and observed characteristics should satisfy the specifications in the following table. appearance no defects or abnormalities capacitance change within 3% or 0.3pf (whichever is larger) b1, b3, r1, r6, r7, c8: within 12.5% f1, f5, e4: within 30% [except 10v max. and. c u 1.0 f] f1, f5: within +30/e40% [10v max. and c u 1.0 f] q/d.f. 30pf and over: q u 350 10pf and over 30pf and below: q u 275+2.5c 10pf and below: q u 200+10c c: nominal capacitance (pf) [b1, b3, r6, r7, c8] w.v.: 100v : 0.05 max. (c f 0.068 f) : 0.075 max. (c u 0.068 f) w.v.: 50/35/25/16/10v : 0.05 max. w.v.: 6.3/4v : 0.075 max. (c f 3.3 f) : 0.125 max. (c u 3.3 f) [e4] w.v.: 25vmin: 0.05 max. [f1, f5] w.v.: 25v min. : 0.075 max.(c f 0.1 f) : 0.125 max.(c u 0.1 f) w.v.: 16/10v: 0.15 max. w.v.: 6.3v: 0.2 max. i.r. more than 1,000m ? or 50 ? f (whichever is smaller) no. test method specifications temperature compensating type high dielectric type item char. +350 to e1000 max. nominal values (ppm/ ? c)*1 e55 0.58 0.87 2.33 3.02 4.09 5.46 8.78 e min. e0.24 e0.48 0.72 1.28 2.16 3.28 5.04 e max. e30 capacitance change from 25 ? c (%) 0.40 0.59 1.61 2.08 2.81 3.75 6.04 e min. e0.17 e0.33 0.50 0.88 1.49 2.26 3.47 e max. e10 0.25 0.38 1.02 1.32 1.79 2.39 3.84 e min. e0.11 e0.21 0.32 0.56 0.95 1.44 2.21 e 5c 6c 6p 6r 6s 6t 7u 1x table a-1 (1) *2: nominal values denote the temperature coefficient within a range of 20 ? c to 125 ? c (for ? c)/85 ? c (for other tc). char. max. nominal values (ppm/ ? c)*2 e55 0.82 1.37 2.56 e e e e e e e e e e e e e e min. e0.45 e0.90 e1.88 e e e e e e e e e e e e e e max. e25 capacitance change from 20 ? c (%) 0.49 0.82 1.54 1.32 1.65 2.36 1.70 2.03 2.74 2.30 2.63 3.35 3.07 3.40 4.12 4.94 5.65 min. e0.27 e0.54 e1.13 0.41 0.14 e0.45 0.72 0.45 e0.14 1.22 0.95 0.36 1.85 1.58 0.99 2.84 2.25 max. e10 0.33 0.55 1.02 0.88 1.10 1.57 1.13 1.35 1.83 1.54 1.76 2.23 2.05 2.27 2.74 3.29 3.77 min. e0.18 e0.36 e0.75 0.27 0.09 e0.30 0.48 0.30 e0.09 0.81 0.63 0.24 1.23 1.05 0.66 1.89 1.50 2c 3c 4c 2p 3p 4p 2r 3r 4r 2s 3s 4s 2t 3t 4t 3u 4u (2) grm series specifications and test methods (1) (note 1)-typical inspection 30 60 60 60 60 60 120 0 0 e150 e220 e330 e470 e750 0 0 0 e150 e150 e150 e220 e220 e220 e330 e330 e330 e470 e470 e470 e750 e750 60 120 250 60 120 250 60 120 250 60 120 250 60 120 250 120 250 grm series specifications and test methods (1) (note 1)-typical inspection 56 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. (note 1) these specifications and test methods indicate typical inspection. please refer to individual specifications (our product specifications or the approval sheet). when no "*" is added in pns table, please refer to grm series specifications and test methods (1). when "*" is added in pns table, please refer to grm series specifications and test methods (2). for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
continued on the following page. measuring frequency nominal capacitance 1 0.1khz 1 0.1khz 120 24hz 1 0.1khz measuring voltage 1.0 0.2vrms 0.5 0.1vrms 0.5 0.1vrms 0.5 0.1vrms c v 10 f (10v min.)* c v 10 f (6.3v max.) c g 10 f *for items in table1 8 dissipation factor (d.f.) b1, b3, r1, *r6, *r7, c7, c8, e7, d7: 0.1 max. c6: 0.125 max. d8: 0.15 max. f1, f5: 0.2 max. *grm31cr71e106: 0.125 max. grm31cr6 0j/0g 107: 0.15 max. the capacitance/d.f. should be measured at reference temperature at the measuring frequency and voltage shown in the table. grm188c80e106: perform a heat treatment at 150+0/-10 ? c for one hour and then set for 24 2 hours at room temperature. 7 capacitance within the specified tolerance *table 1 the insulation resistance should be measured with a dc voltage not exceeding the rated voltage at reference temperature and 75%rh max. and within 1 minutes of charging, provided the charge/discharge current is less than 50ma. 6 insulation resistance more than 50 ? f no failure should be observed when 250% of the rated voltage is applied between the terminations for 1 to 5 seconds, provided the charge/discharge current is less than 50ma. 5 dielectric strength no defects or abnormalities using calipers (grm02 size is based on microscope) 4 dimensions within the specified dimensions visual inspection 3 appearance no defects or abnormalities the rated voltage is defined as the maximum voltage that may be applied continuously to the capacitor. when ac voltage is superimposed on dc voltage, v p-p or v o-p , whichever is larger, should be maintained within the rated voltage range. 2 rated voltage see the previous pages. reference temperature: 25 ? c (b1, b3, r1, f1: 20 ? c) 1 operating temperature range b1, b3, f1: e25 to +85 ? c r1, r7, c7, d7, e7: e55 to +125 ? c c6, r6: e55 to +85 ? c f5: e30 to +85 ? c c8, d8: e55 to +105 ? c, no. test method specifications item grm series specifications and test methods (2) (note 1)-typical inspection grm022 b3/r6 1a 681 to 103 grm155 b3/r6 1a 124 to 105 grm185 b3/r6 1c/1a 105 grm185 c8/d7 1a 105 grm188 b3/r6 1c/1a 225 grm188 r7/c8 1a 225 grm188 b3/r6 1a 335 grm219 b3/r6 1c/1a 475 grm219 c8 1a 475 grm219 b3/r6 1a 106 grm21b b3/r6 1c/1a 106 grm21b r7/c8 1a 106 grm319 b3/r6 1c/1a 106 grm series specifications and test methods (2) (note 1)-typical inspection 57 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. (note 1) these specifications and test methods indicate typical inspection. please refer to individual specifications (our product specifications or the approval sheet). when no "*" is added in pns table, please refer to grm series specifications and test methods (1). when "*" is added in pns table, please refer to grm series specifications and test methods (2). for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
continued from the preceding page. continued on the following page. solder the capacitor on the test jig (glass epoxy board) in the same manner and under the same conditions as (10). the capacitor should be subjected to a simple harmonic motion having a total amplitude of 1.5mm, the frequency being varied uniformly between the approximate limits of 10 and 55hz. the frequency range, from 10 to 55hz and return to 10hz, should be traversed in approximately 1 minute. this motion should be applied for a period of 2 hours in each of 3 mutually perpendicular directions (total of 6 hours). 11 vibration appearance no defects or abnormalities capacitance within the specified tolerance d.f. b1, b3, r1, *r6, *r7, c7, c8, e7, d7: 0.1 max. c6: 0.125 max. d8: 0.15 max. f1, f5: 0.2 max. *grm31cr71e106: 0.125 max. grm31cr6 0j/0g 107: 0.15 max. solder the capacitor on the test jig (glass epoxy board) shown in fig. 1a using a eutectic solder. then apply 10n* force in parallel with the test jig for 10 1sec. the soldering should be done either with an iron or using the reflow method and should be conducted with care so that the soldering is uniform and free of defects such as heat shock. *1n: grm02, 2n: grm03, 5n: grm15/grm18 10 adhesive strength of termination no removal of the terminations or other defects should occur. fig. 1a grm series specifications and test methods (2) (note 1)-typical inspection a type 0.2 0.3 0.4 1.0 1.2 2.2 2.2 3.5 4.5 b 0.56 0.9 1.5 3.0 4.0 5.0 5.0 7.0 8.0 c 0.23 0.3 0.5 1.2 1.65 2.0 2.9 3.7 5.6 grm02 grm03 grm15 grm18 grm21 grm31 grm32 grm43 grm55 a b c baked electrode or copper foil solder resist the capacitance change should be measured after 5 min. at each specified temp. stage. the ranges of capacitance change compared with the reference temperature value over the temperature ranges shown in the table should be within the specified ranges.* in case of applying voltage, the capacitance change should be measured after 1 more min. with applying voltage in equilibration of each temp. stage. *grm32dr60j226, grm43 b1/b3/r6 0j/1a 336/476: 1.0 0.2vrms grm155b30g475, grm155b30j 225, grm21bb30j476, grm155r60e106, grm188 b3/r6 0e/0g/0j 226: 0.2 0.05vrms initial measurement for high dielectric constant type perform a heat treatment at 150 +0/e10 ? c for one hour and then set for 24 2 hours at room temperature. perform the initial measurement. 9 capacitance temperature characteristics no bias b1, b3 : within 10% (e25 to +85 ? c) f1 : within +30/e80% (e25 to +85 ? c) r6 : within 15% (e55 to +85 ? c) r1, r7 : within 15% (e55 to +125 ? c) f5 : within +22/e82% (e30 to +85 ? c) c6 : within 22% (e55 to +85 ? c) c7 : within 22% (e55 to +125 ? c) c8 : within 22% (e55 to +105 ? c) d7 : within +22/e33% (e55 to +125 ? c) e7 : within +22/e56% (e55 to +125 ? c) d8 : within +22/e33% (e55 to +105 ? c) 50% of the rated voltage b1: within +10/e30% r1: within +15/e40% f1: within +30/e95% temperature ( ? c) step 25 2 ( for r6, r7, c6, c7, c8, d7, d8, e7, f5 ) 20 2 (for b1, b3, f1, r1) e55 3 ( for r1, r6, r7, c6, c7, c8, d7, d8, e7 ) e30 3 (for f5) e25 3 (for b1, b3, f1) 25 2 ( for r6, r7, c6, c7, c8, d7, d8, e7, f5 ) 20 2 (for b1, b3, f1, r1) 125 3 (for r1, r7, c7, d7, e7) 105 3 (for c8, d8) 85 3 (for b1, b3, f1, f5, r6, c6) 20 2 (for b1, f1, r1) e55 3 (for r1) e25 3 (for b1, f1) 20 2 (for b1, f1, r1) 125 3 (for r1) 85 3 (for b1, f1) applying voltage (v) no bias 50% of the rated voltage 1 2 3 4 5 6 7 8 no. test method specifications item grm series specifications and test methods (2) (note 1)-typical inspection 58 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. (note 1) these specifications and test methods indicate typical inspection. please refer to individual specifications (our product specifications or the approval sheet). when no "*" is added in pns table, please refer to grm series specifications and test methods (1). when "*" is added in pns table, please refer to grm series specifications and test methods (2). for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
continued from the preceding page. fix the capacitor to the supporting jig in the same manner and under the same conditions as (10). perform the five cycles according to the four heat treatments shown in the following table. set for 24 2 hours at room temperature, then measure. initial measurement for high dielectric constant type perform a heat treatment at 150+0/e10 ? c for one hour and then set at room temperature for 24 2 hours. perform the initial measurement. grm188r60j106 only measurement after test perform a heat treatment and then let sit for 24 2 hours at room temperature, then measure. 15 temperature sudden change appearance no defects or abnormalities dielectric strength no defects i.r. more than 50 ? f d.f. b1, b3, r1, *r6, *r7, c7, c8, e7, d7: 0.1 max. c6: 0.125 max. d8: 0.15 max. f1, f5: 0.2 max. *grm31cr71e106: 0.125 max. grm31cr6 0j/0g 107: 0.15 max. capacitance change b1, b3, r1, r6, r7, c6, c7, c8, d7, d8: within 7.5% e7: within 30% f1, f5: within 20% preheat the capacitor at 120 to 150 ? c for 1 minute. immerse the capacitor in a eutectic solder* or sn-3.0ag-0.5cu solder solution at 270 5 ? c for 10 0.5 seconds. set at room temperature for 24 2 hours, then measure. *do not apply to grm02. initial measurement for high dielectric constant type perform a heat treatment at 150+0/e10 ? c for one hour and then set at room temperature for 24 2 hours. perform the initial measurement. *preheating for grm32/43/55 14 resistance to soldering heat appearance no defects or abnormalities dielectric strength no defects i.r. more than 50 ? f d.f. b1, b3, r1, *r6, *r7, c7, c8, e7, d7: 0.1 max. c6: 0.125 max. d8: 0.15 max. f1, f5: 0.2 max. *grm31cr71e106: 0.125 max. grm31cr6 0j/0g 107: 0.15 max. capacitance change b1, b3, r1, *r6, r7, c6, c7, *c8, e7, d7, d8: within 7.5% f1, f5: within 20% * grm188r6 0j/0g 106, grm188c8 0e/0g 106, grm219r60g226: within 12.5% grm155r60g475, grm155r60e106, grm188r60g226: within 15% grm series specifications and test methods (2) (note 1)-typical inspection temperature step 100 to 120 ? c 170 to 200 ? c time 1 min. 1 min. 1 2 1 step min. operating temp. +0/e3 30 3 2 room temp. 2 to 3 3 max. operating temp. +3/e0 30 3 4 room temp. 2 to 3 temp. ( ? c) time (min.) continued on the following page. immerse the capacitor in a solution of ethanol (jis-k-8101) and rosin (jis-k-5902) (25% rosin in weight proportion). preheat at 80 to 120 ? c for 10 to 30 seconds. after preheating, immerse in a eutectic solder solution for 2 0.5 seconds at 230 5 ? c or sn-3.0ag-0.5cu solder solution for 2 0.5 seconds at 245 5 ? c. 13 solderability of termination 75% of the terminations is to be soldered evenly and continuously. solder the capacitor on the test jig (glass epoxy board) shown in fig. 2a using a eutectic solder. then apply a force in the direction shown in fig. 3a for 5 1 sec. the soldering should be done by the reflow method and should be conducted with care so that the soldering is uniform and free of defects such as heat shock. fig. 2a (in mm) 12 deflection appearance no marking defects capacitance change within 10% fig.3a a type 0.2 0.3 0.4 1.0 1.2 2.2 2.2 3.5 4.5 b 0.56 0.9 1.5 3.0 4.0 5.0 5.0 7.0 8.0 c 0.23 0.3 0.5 1.2 1.65 2.0 2.9 3.7 5.6 grm02 grm03 grm15 grm18 grm21 grm31 grm32 grm43 grm55 capacitance meter flexure : v 1 20 50 r230 pressurizing speed: 1.0mm/sec. pressurize 45 45
z [ _ ? ?
w [ \ ? - b
q u v xy z [ \] ^ | ?a ? ? -?

q r s t v w x [ [ ^ _ ` ? ? ? q r v q r v a r v v w c w x \ ? -
z [ _ ? ? 100 t: 1.6mm (grm02/03/15: t: 0.8mm)
[ _ ? t 40 ?4.5 no. test method specifications item grm series specifications and test methods (2) (note 1)-typical inspection 59 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. (note 1) these specifications and test methods indicate typical inspection. please refer to individual specifications (our product specifications or the approval sheet). when no "*" is added in pns table, please refer to grm series specifications and test methods (1). when "*" is added in pns table, please refer to grm series specifications and test methods (2). for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
continued from the preceding page. apply 150%* of the rated voltage for 1000 12 hours at the maximum operating temperature 3 c. let sit for 24 2 hours at room temperature, then measure. the charge/discharge current is less than 50ma. * part numbers with # have individual specification. as for these part numbers, please refer to table a. ?nitial measurement perform a heat treatment at 150+0/?0 c for one hour and then let sit for 24 2 hours at room temperature. perform the initial measurement. ?easurement after test perform a heat treatment at 150+0/?0 c for one hour and then let sit for 24 2 hours at room temperature, then measure. 17 durability appearance no defects or abnormalities i.r. more than 25 ?f d.f. b1, b3, r1, r6, r7, c6, c7, *c8, e7, d7, d8: 0.2 max. f1, f5: 0.4 max. *grm319c81a106, grm31mc81a106: 0.125 max. capacitance change b1, b3, r1, *r6, r7, c6, c7, *c8, e7, d7, d8: within 12.5% f1, f5: within 30% *grm188c8 0e/0g 106, grm219r60g226: within 15% apply the rated voltage at 40 2 c and 90 to 95% humidity for 500 12 hours. the charge/discharge current is less than 50ma. ?nitial measurement perform a heat treatment at 150+0/?0 c for one hour and then let sit for 24 2 hours at room temperature. perform the initial measurement. ?easurement after test perform a heat treatment at 150+0/?0 c for one hour and then let sit for 24 2 hours at room temperature, then measure. 16 high temperature high humidity (steady) appearance no defects or abnormalities i.r. more than 12.5 ?f d.f. b1, b3, r1, r6, r7, c6, c7, *c8, e7, d7, d8: 0.2 max. f1, f5: 0.4 max. *grm319c81a106, grm31mc81a106: 0.125 max. capacitance change b1, b3, r1, r6, r7, c6, c7, c8, e7, d7, d8: within 12.5% f1, f5: within 30% no. test method specifications item grm series specifications and test methods (2) (note 1)-typical inspection part number dimension l z w (mm) 1.0 z 0.5 1.0 z 0.5 1.6 z 0.8 2.0 z 1.25 3.2 z 1.6 3.2 z 1.6 grm155c80j684ke15d grm155c80j684me15d grm188c80g106me47d grm21bc80j226me51l grm319d71c475ka12d grm319d71c475ma12d temp. char. x6s x6s x6s x6s x7t x7t 6.3 6.3 4 6.3 16 16 capacitance (f) 0.68 0.68 10 22 4.7 4.7 cap. tol (%) 10% 20% 20% 20% 10% 20% spec. test methods (2) (2) (2) (2) (2) (2) applied testing voltage at durability rated volt. z 100% rated volt. z 100% rated volt. z 100% rated volt. z 100% rated volt. z 100% rated volt. z 100% part numbers of table a are designed for use in the circuits where continuous applied voltage to the capacitor is derated than rated voltage. these part numbers guarantee durability test with 100% x rated voltage as testing voltage at the maximum operating temperature. the following voltage and temperature derating conditions are recommended for use to ensure the same reliability level as normal specification. ?recommended derating conditions on voltage and temperature table a 0 20 0 40 60 80 100 120 25 50 75 100 temperature at product ( c) ratio [operating voltage/rated voltage (%)] 125 150 product for 125 c product for 105 c product for 85 c rated volt. (vdc) grm series specifications and test methods (2) (note 1)-typical inspection 60 ! note ?please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. ?this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. (note 1) these specifications and test methods indicate typical inspection. please refer to individual specifications (our product specifications or the approval sheet). when no "*" is added in pns table, please refer to grm series specifications and test methods (1). when "*" is added in pns table, please refer to grm series specifications and test methods (2). for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
grm series data continued on the following page. n capacitance - temperature characteristics n capacitance change - aging n impedance - frequency characteristics 5c: grm15 r ? : grm15 r ? -20 -15 -10 -5 0 5 10 15 20 -60 -40 -20 0 20 40 60 80 100 120 140 5c r6 r7 measuring condition: 5c 1mhz, r ? 1khz temperature ( ? c) capacitance change (%) -40 -30 -20 -10 0 10 20 10 100 1000 10000 measuring condition: 5c 1mhz, r ? 1khz time (hr) capacitance change (%) 5c r ? 0.01 0.1 1 10 100 10000 1000 100 10 1 1000pf 100pf 10pf 1pf 0.001 0.01 0.1 1 10 100 0.1 f 0.01 f 1000pf 1000 100 10 1 0.1 0.001 0.01 0.1 1 10 100 0.01 0.1 1 10 100 grm15 1 f grm18 10 f grm31 100 f frequency (mhz) frequency (mhz) frequency (mhz) impedance ( ? ) impedance ( ? ) impedance ( ? ) the data herein are given in typical values, not guaranteed ratings. continued on the following page. please refer to our web site or contact our sales representatives for individual part number's data. our web site: http://www.murata.com/products/capacitor/tech_data/ grm series data 61 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
grm series data continued from the preceding page. continued on the following page. n capacitance - dc voltage characteristics temperature compensating type: grm1555c1h102ja01 high dielectric constant type: grm155r71e103ka01 high dielectric constant type: grm155r71c104ka88 high dielectric constant type: grm188r60j106me47 high dielectric constant type: grm31cr60j107me39 -100 -80 -60 -40 -20 0 20 0 102030405060 -100 -80 -60 -40 -20 0 20 0 2 4 6 8 10 12 14 16 18 20 22 24 26 -100 -80 -60 -40 -20 0 20 0 2 4 6 8 10 12 14 16 18 -100 -80 -60 -40 -20 0 20 01234567 -100 -80 -60 -40 -20 0 20 01234567 measuring condition: 1mhz measuring condition: 1khz measuring condition: 1khz measuring condition: 1khz measuring condition: 120hz dc voltage (vdc) dc voltage (vdc) dc voltage (vdc) dc voltage (vdc) dc voltage (vdc) capacitance change (%) capacitance change (%) capacitance change (%) capacitance change (%) capacitance change (%) the data herein are given in typical values, not guaranteed ratings. -100 -80 -60 -40 -20 0 20 4 3 2 1 058 7 6 9 10 11 dc voltage (vdc) high dielectric constant type: grm155r61a105ke15 measuring condition: 1khz capacitance change (%) continued on the following page. please refer to our web site or contact our sales representatives for individual part number's data. our web site: http://www.murata.com/products/capacitor/tech_data/ grm series data 62 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
grm series data continued from the preceding page. n capacitance - ac voltage characteristics temperature compensating type: grm1555c1h102ja01 high dielectric constant type: grm155r71e103ka01 high dielectric constant type: grm155r71c104ka88 high dielectric constant type: grm188r60j106me47 high dielectric constant type: grm31cr60j107me39 -60 -50 -40 -30 -20 -10 0 10 20 30 0.0 0.5 1.0 1.5 2.0 2.5 -60 -50 -40 -30 -20 -10 0 10 20 30 0.0 0.5 1.0 1.5 2.0 2.5 -60 -50 -40 -30 -20 -10 0 10 20 30 0.0 0.5 1.0 1.5 2.0 2.5 -60 -50 -40 -30 -20 -10 0 10 20 30 0.0 0.5 1.0 1.5 2.0 2.5 -60 -50 -40 -30 -20 -10 0 10 20 30 0.0 0.5 1.0 1.5 2.0 2.5 measuring condition: 1khz measuring condition: 1mhz measuring condition: 1khz measuring condition: 1khz measuring condition: 120hz ac voltage (vr.m.s.) ac voltage (vr.m.s.) ac voltage (vr.m.s.) ac voltage (vr.m.s.) ac voltage (vr.m.s.) capacitance change (%) capacitance change (%) capacitance change (%) capacitance change (%) capacitance change (%) the data herein are given in typical values, not guaranteed ratings. -60 -50 -40 -30 -20 -10 0 10 20 30 ac voltage (vr.m.s.) high dielectric constant type: grm155r61a105ke15 measuring condition: 1khz capacitance change (%) 0.0 0.5 1.0 1.5 2.0 2.5 please refer to our web site or contact our sales representatives for individual part number's data. our web site: http://www.murata.com/products/capacitor/tech_data/ grm series data 63 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
64 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. chip monolithic ceramic capacitors capacitor array gnm series n features 1. high density mounting due to mounting space saving 2. mounting cost saving n applications general electronic equipment l w t p gnm214/314 part number dimensions (mm) gnm214 gnm314 l 2.0 0.15 3.2 0.15 p 0.5 0.05 0.8 0.1 t 0.5 +0.05/-0.1 0.6 0.1 0.85 0.1 0.8 0.1 0.85 0.1 1.0 0.1 1.15 0.1 w 1.25 0.15 1.6 0.15 l w t p gnm0m2/1m2/212 part number l gnm0m2 0.9 0.05 p 0.45 0.05 t dimensions (mm) 0.45 0.05 w 0.6 0.05 gnm1m2 1.37 0.15 0.64 0.05 0.5 +0.05/-0.10 1.0 0.15 0.6 0.1 0.8 +0/-0.15 gnm212 2.0 0.15 1.0 0.1 0.6 0.1 1.25 0.15 0.85 0.1 for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
65 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. capacitance table temperature compensating type c0g(5c) characteristics 1.37x1.0 ( 1m ) <0504> 50 ( 1h ) 2.0x1.25 ( 21 ) <0805> 50 ( 1h ) 3.2x1.6 ( 31 ) <1206> 100 ( 2a ) 50 ( 1h ) 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 2( 2 )4( 4 ) 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.6 ex.0.6: t dimension [mm] lxw [mm] rated voltage [vdc] capacitance 10pf( 100 ) 15pf( 150 ) 22pf( 220 ) 33pf( 330 ) 47pf( 470 ) 68pf( 680 ) 100pf( 101 ) 150pf( 151 ) 220pf( 221 ) 330pf( 331 ) the part number code is shown in ( ) and unit is shown in [ ]. < >: eia [inch] code number of elements high dielectric constant type x7r(r7)/x7s(c7) characteristics 50 ( 1h ) 0.6 25 ( 1e ) 0.6 0.6 0.6 1.37x1.0 ( 1m ) <0504> 16 ( 1c ) 0.6 0.6 0.6 0.6 0.6 0.6 10 ( 1a ) 50 ( 1h ) 0.6 0.6 2.0x1.25 ( 21 ) <0805> 25 ( 1e ) 0.6 0.6 0.6 16 ( 1c ) 0.85 0.85 0.85 50 ( 1h ) 0.85 0.85 2( 2 )4( 4 ) 3.2x1.6 ( 31 ) <1206> 25 ( 1e ) 0.85 16 ( 1c ) 1.0 1.0 6.3 ( 0j ) 1.15 0.6 ex.0.6: t dimension [mm] lxw [mm] rated voltage [vdc] capacitance number of elements 470pf( 471 ) 1000pf( 102 ) 2200pf( 222 ) 4700pf( 472 ) 10000pf( 103 ) 22000pf( 223 ) 47000pf( 473 ) 0.10 f( 104 ) 1.0 f( 105 ) the part number code is shown in ( ) and unit is shown in [ ]. < >: eia [inch] code high dielectric constant type x7r(r7) characteristics-low profile 16 ( 1c ) 0.5 16 ( 1c ) 0.5 1.37x1.0 ( 1m ) <0504> 2.0x1.25 ( 21 ) <0805> 2( 2 )4( 4 ) 0.5 ex.0.5: t dimension [mm] lxw [mm] rated voltage [vdc] capacitance number of elements 0.10 f( 104 ) the part number code is shown in ( ) and unit is shown in [ ]. < >: eia [inch] code for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
capacitance table 66 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. high dielectric constant type x5r(r6) characteristics 16 ( 1c ) 0.45 0.45 0.45 0.45 10 ( 1a ) 0.45 0.45 0.45 0.45 0.9x0.6 ( 0m ) <0302> 1.37x1.0 ( 1m ) <0504> 6.3 ( 0j ) 0.45 0.45 0.45 0.45 0.45 4 ( 0g ) 50 ( 1h ) 0.6 25 ( 1e ) 0.6 0.6 0.6 2.0x1.25 ( 21 ) <0805> 2.0x1.25 ( 21 ) <0805> 16 ( 1c ) 10 ( 1a ) 0.6 0.6 0.6 0.8 0.8 6.3 ( 0j ) 0.8 0.8 2( 2 )4( 4 ) 3.2x1.6 ( 31 ) <1206> 16 ( 1c ) 0.85 0.85 10 ( 1a ) 0.85 0.85 6.3 ( 0j ) 10 ( 1a ) 6.3 ( 0j ) 16 ( 1c ) 10 ( 1a ) 0.85 0.85 0.85 0.85 0.6 ex.0.6: t dimension [mm] lxw [mm] rated voltage [vdc] capacitance number of elements 1000pf( 102 ) 2200pf( 222 ) 4700pf( 472 ) 10000pf( 103 ) 22000pf( 223 ) 47000pf( 473 ) 0.10 f( 104 ) 0.22 f( 224 ) 0.47 f( 474 ) 1.0 f( 105 ) 2.2 f( 225 ) the part number code is shown in ( ) and unit is shown in [ ]. < >: eia [inch] code 0.6 0.6 0.8 0.8 0.85 0.85 high dielectric constant type x5r(r6) characteristics-low profile 16 ( 1c ) 10 ( 1a ) 0.5 10 ( 1a ) 0.5 0.5 1.37x1.0 ( 1m ) <0504> 2.0x1.25 ( 21 ) <0805> 2( 2 )4( 4 ) 0.5 ex.0.5: t dimension [mm] lxw [mm] rated voltage [vdc] capacitance number of elements 1.0 f( 105 ) the part number code is shown in ( ) and unit is shown in [ ]. < >: eia [inch] code for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
67 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. the part number code is shown in ( ) and unit is shown in [ ]. < >: eia [inch] code lxw [mm] rated volt. [vdc] capacitance tolerance part number 50( 1h ) 50( 1h ) 100( 2a ) 50( 1h ) gnm1m25c1h100kd01d gnm1m25c1h150kd01d gnm1m25c1h220kd01d gnm1m25c1h330kd01d gnm1m25c1h470kd01d gnm1m25c1h680kd01d gnm1m25c1h101kd01d gnm1m25c1h151kd01d gnm1m25c1h221kd01d gnm2145c1h100kd01d gnm2145c1h150kd01d gnm2145c1h220kd01d gnm2145c1h330kd01d gnm2145c1h470kd01d gnm2145c1h680kd01d gnm2145c1h101kd01d gnm2145c1h151kd01d gnm2145c1h221kd01d gnm3145c2a100kd01d gnm3145c2a150kd01d gnm3145c2a220kd01d gnm3145c2a330kd01d gnm3145c2a470kd01d gnm3145c2a680kd01d gnm3145c2a101kd01d gnm3145c2a151kd01d gnm3145c1h100kd01d gnm3145c1h150kd01d gnm3145c1h220kd01d gnm3145c1h330kd01d gnm3145c1h470kd01d gnm3145c1h680kd01d gnm3145c1h101kd01d gnm3145c1h151kd01d gnm3145c1h221kd01d gnm3145c1h331kd01d 1.37x1.0( 1m )<0504> 2.0x1.25( 21 )<0805> number of elements 2( 2 )4( 4 ) 3.2x1.6( 31 )<1206> 10pf( 100 ) 15pf( 150 ) 22pf( 220 ) 33pf( 330 ) 47pf( 470 ) 68pf( 680 ) 100pf( 101 ) 150pf( 151 ) 220pf( 221 ) 330pf( 331 ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) temperature compensating type c0g(5c) characteristics lxw [mm] rated volt. [vdc] capacitance tolerance part number 50( 1h ) number of elements 2( 2 ) 25( 1e ) 16( 1c ) gnm1m2r71h102ma01d gnm1m2r71e222ma01d gnm1m2r71e472ma01d gnm1m2r71e103ma01d gnm1m2r71c223ma01d gnm1m2r71c473ma01d gnm1m2r71c104ma01d 1.37x1.0( 1m )<0504> 1000pf( 102 ) 2200pf( 222 ) 4700pf( 472 ) 10000pf( 103 ) 22000pf( 223 ) 47000pf( 473 ) 0.10 f( 104 ) 20%( m ) 20%( m ) 20%( m ) 20%( m ) 20%( m ) 20%( m ) 20%( m ) lxw [mm] rated volt. [vdc] capacitance tolerance part number 50( 1h ) number of elements 4( 4 ) 25( 1e ) 16( 1c ) gnm214r71h471ma01d gnm214r71h102ma01d gnm214r71e222ma01d gnm214r71e472ma01d gnm214r71e103ma01d gnm214r71c223ma01d gnm214r71c473ma01d gnm214r71c104ma01d 2.0x1.25( 21 )<0805> 470pf( 471 ) 1000pf( 102 ) 2200pf( 222 ) 4700pf( 472 ) 10000pf( 103 ) 22000pf( 223 ) 47000pf( 473 ) 0.10 f( 104 ) 20%( m ) 20%( m ) 20%( m ) 20%( m ) 20%( m ) 20%( m ) 20%( m ) 20%( m ) 10( 1a ) gnm1m2r71a223ma01d gnm1m2r71a473ma01d gnm1m2c71a104ma01d lxw [mm] rated volt. [vdc] capacitance tolerance part number 50( 1h ) number of elements 4( 4 ) 25( 1e ) 16( 1c ) 6.3( 0j ) gnm314r71h473ma11d gnm314r71h104ma11d gnm314r71e104ma11d gnm314r71c473ma01l gnm314r71c104ma01l gnm314r70j105ma01l 3.2x1.6( 31 )<1206> 47000pf( 473 ) 0.10 f( 104 ) 1.0 f( 105 ) 20%( m ) 20%( m ) 20%( m ) the part number code is shown in ( ) and unit is shown in [ ]. < >: eia [inch] code * please refer to gnm series specifications and test method (2). high dielectric constant type x7r(r7)/x7s(c7) characteristics gn m 1m 2 5c 1h 100 k d01 d packaging code in part number shows std 180mm reel taping. q product id w series e dimensions (lxw) r number of elements t temperature characteristics y rated voltage u capacitance i capacitance tolerance o individual specification code !0 packaging (part number) w q e r t y u i o !0 for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
68 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. the part number code is shown in ( ) and unit is shown in [ ]. < >: eia [inch] code * please refer to gnm series specifications and test method (2). the part number code is shown in ( ) and unit is shown in [ ]. < >: eia [inch] code lxw [mm] rated volt. [vdc] number of elements capacitance tolerance part number 16( 1c ) 10( 1a ) 6.3( 0j )4( 0g ) gnm0m2r61c103me18d* gnm0m2r61c223me18d* gnm0m2r61c473me18d* gnm0m2r61c104me18d* gnm0m2r61a103me17d* gnm0m2r61a223me17d* gnm0m2r61a473me17d* gnm0m2r61a104me17d* gnm0m2r60j103me17d* gnm0m2r60j223me17d* gnm0m2r60j473me17d* gnm0m2r60j104me17d* gnm0m2r60g105me17d* 2( 2 ) 0.9x0.6( 0m )<0302> 10000pf( 103 ) 22000pf( 223 ) 47000pf( 473 ) 0.10 f( 104 ) 1.0 f( 105 ) 20%( m ) 20%( m ) 20%( m ) 20%( m ) 20%( m ) lxw [mm] rated volt. [vdc] number of elements capacitance tolerance part number 10( 1a ) 6.3( 0j ) gnm1m2r61a223ma01d gnm1m2r61a473ma01d gnm1m2r61a104ma01d gnm1m2r61a105me17d* gnm1m2r61a225me18d* gnm1m2r60j105me12d* gnm1m2r60j225me18d* 1.37x1.0( 1m )<0504> 2( 2 ) 22000pf( 223 ) 47000pf( 473 ) 0.10 f( 104 ) 1.0 f( 105 ) 2.2 f( 225 ) 20%( m ) 20%( m ) 20%( m ) 20%( m ) 20%( m ) lxw [mm] rated volt. [vdc] number of elements capacitance tolerance part number 16( 1c ) 10( 1a ) 6.3( 0j ) gnm212r61c474ma16d gnm212r61c105ma16d gnm212r61a105ma13d gnm212r61a225me16d* gnm212r60j225me16d* 2.0x1.25( 21 )<0805> 2( 2 ) 0.47 f( 474 ) 1.0 f( 105 ) 2.2 f( 225 ) 20%( m ) 20%( m ) 20%( m ) lxw [mm] rated volt. [vdc] number of elements capacitance tolerance part number 50( 1h ) 25( 1e ) 16( 1c ) gnm1m2r61h102ma01d gnm1m2r61e222ma01d gnm1m2r61e472ma01d gnm1m2r61e103ma01d gnm1m2r61c223ma01d gnm1m2r61c473ma01d gnm1m2r61c224me18d* gnm1m2r61c105me18d* 1.37x1.0( 1m )<0504> 2( 2 ) 1000pf( 102 ) 2200pf( 222 ) 4700pf( 472 ) 10000pf( 103 ) 22000pf( 223 ) 47000pf( 473 ) 0.22 f( 224 ) 1.0 f( 105 ) 20%( m ) 20%( m ) 20%( m ) 20%( m ) 20%( m ) 20%( m ) 20%( m ) 20%( m ) high dielectric constant type x5r(r6) characteristics lxw [mm] rated volt. [vdc] capacitance tolerance part number 16( 1c ) 16( 1c ) gnm1m2r71c104maa1d gnm214r71c104maa1d 1.37x1.0( 1m )<0504> number of elements 2( 2 ) 2.0x1.25( 21 )<0805> 4( 4 ) 0.10 f( 104 ) 20%( m ) high dielectric constant type x7r(r7) characteristics-low profile gn m 1m 2 r7 1c 104 m aa1 d packaging code in part number shows std 180mm reel taping. q product id w series e dimensions (lxw) r number of elements t temperature characteristics y rated voltage u capacitance i capacitance tolerance o individual specification code !0 packaging (part number) w q e r t y u i o !0 for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
69 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. the part number code is shown in ( ) and unit is shown in [ ]. < >: eia [inch] code * please refer to gnm series specifications and test method (2). lxw [mm] number of elements rated volt. [vdc] capacitance tolerance part number 10( 1a ) 6.3( 0j ) 2.0x1.25( 21 )<0805> 4( 4 ) 1.0 f( 105 ) 2.2 f( 225 ) 20%( m ) 20%( m ) lxw [mm] number of elements rated volt. [vdc] capacitance tolerance part number 16( 1c ) 10( 1a ) gnm314r61c105ma15d gnm214r61a105me17d* gnm214r60j105me17d* gnm214r60j225me18d* gnm314r61a105ma13d 3.2x1.6( 31 )<1206> 4( 4 ) 1.0 f( 105 ) 20%( m ) high dielectric constant type x5r(r6) characteristics lxw [mm] rated volt. [vdc] capacitance tolerance part number 16( 1c ) 10( 1a ) gnm1m2r61c105mea2d* gnm1m2r61a105mea4d* 1.37x1.0( 1m )<0504> number of elements 2( 2 ) 10( 1a ) gnm214r61a105mea2d* 2.0x1.25( 21 )<0805> 4( 4 ) 1.0 f( 105 ) 20%( m ) the part number code is shown in ( ) and unit is shown in [ ]. < >: eia [inch] code * please refer to gnm series specifications and test method (2). high dielectric constant type x5r(r6) characteristics-low profile for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
continued on the following page. gnm series specifications and test methods (1) solder the capacitor to the test jig (glass epoxy board) shown in fig.1 using a eutectic solder. then apply 5n force in parallel with the test jig for 10 1 sec. the soldering should be done either with an iron or using the reflow method and should be conducted with care so that the soldering is uniform and free of defects such as heat shock. (in mm) fig. 1 10 adhesive strength of termination no removal of the terminations or other defect should occur. gnm pp 4 gnm pp 2 the capacitance change should be measured after 5 min. at each specified temperature stage. (1) temperature compensating type the temperature coefficient is determined using the capaci- tance measured in step 3 as a reference. when cycling the temperature sequentially from steps 1 through 5, the capacitance should be within the specified tolerance for the temperature coefficient and capacitance change as in table a. the capacitance drift is calculated by dividing the differences between the maximum and minimum measured values in the steps 1, 3 and 5 by the cap. value in step 3. (2) high dielectric constant type the ranges of capacitance change compared with the above 25 ? c value over the temperature ranges shown in the table should be within the specified ranges. 9 capacitance temperature characteristics capacitance change within the specified tolerance (table a) temperature coefficient within the specified tolerance (table a) capacitance drift within 0.2% or 0.05pf (whichever is larger.) 8 q/ dissipation factor (d.f.) 30pf min.: q u 1000 30pf max.: q u 400+20c c: nominal capacitance (pf) the capacitance/q/d.f. should be measured at 25 ? c at the frequency and voltage shown in the table. 7 capacitance within the specified tolerance the insulation resistance should be measured with a dc voltage not exceeding the rated voltage at 25 ? c and 75%rh max. and within 2 minutes of charging. 6 insulation resistance more than 10,000m ? or 500 ? f (whichever is smaller) no failure should be observed when 300% of the rated voltage (5c) or 250% of the rated voltage (r7) is applied between the terminations for 1 to 5 seconds, provided the charge/discharge current is less than 50ma. 5 dielectric strength no defects or abnormalities using calipers 4 dimensions within the specified dimensions visual inspection 3 appearance no defects or abnormalities the rated voltage is defined as the maximum voltage that may be applied continuously to the capacitor. when ac voltage is superimposed on dc voltage, v p-p or v o-p , whichever is larger, should be maintained within the rated voltage range. 2 rated voltage see the previous pages. 1 operating temperature range 5c: e55 to +125 ? c r7, c7: e55 to +125 ? c r6: e55 to +85 ? c no. test method specifications temperature compensating type high dielectric type item step temperature ( ? c) 25 2 e55 3 (for 5c/r7/c7), e30 3 (for f5) 25 2 125 3 (for 5c/r7/c7), 85 3 (for f5) 25 2 1 2 3 4 5 char. item 5c 1 0.1mhz 0.5 to 5vrms r7 1 0.1khz 1.0 0.2vrms frequency voltage char. 25v min. 0.025 max. 16v 0.035 max. 10v 0.035 max. 6.3v 0.05 max. r7, r6, c7 char. temp. range e55 ? c to +125 ? c reference temp. 25 ? c cap. change within 15% r7 e55 ? c to +85 ? c within 22% r6 e55 ? c to +125 ? c c7 type a 0.5 0.6 0.6 0.8 b 1.6 1.8 2.0 2.5 c 0.32 0.5 0.25 0.4 d 0.32 0.5 0.25 0.4 gnm1m2 gnm212 gnm214 gnm314 solder resist copper foil c d b b a a c d solder resist copper foil initial measurement for high dielectric constant type. perform a heat treatment at 150+0/-10 ? c for one hour and then set for 24 2 hours at room temperature. perform the initial measurement. ! note 1. this specifications and test methods is downloaded from the website of murata manufacturing co.,ltd. therefore, it's specifi cations are subject to change or our products in it may be discontinued without advance notice. 0. please check with our sales representatives or product engineers before ordering. 2. this specifications and test methods has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product 0. specifications before ordering. gnm series specifications and test methods (1) 70 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. when no "*" is added in pns table, please refer to gnm series specifications and test methods (1). when "*" is added in pns table, please refer to gnm series specifications and test methods (2). for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
continued from the preceding page. continued on the following page. preheat the capacitor at 120 to 150 ? c for 1 minute. immerse the capacitor in a eutectic solder or sn-3.0ag-0.5cu solder solution at 270 5 ? c for 10 0.5 seconds. let sit at room temperature for 24 2 hours, then measure. initial measurement for high dielectric constant type perform a heat treatment at 150+0/-10 ? c for one hour and then let sit for 24 2 hours at room temperature. perform the initial measurement. 14 resistance to soldering heat the measured and observed characteristics should satisfy the specifications in the following table. appearance no marking defects capacitance change within 2.5% or 0.25pf (whichever is larger) r7, r6, c7: within 7.5% q/d.f. 30pf min.: q u 1000 30pf max.: q u 400+20c c: nominal capacitance (pf) i.r. more than 10,000m ? or 500 ? f (whichever is smaller) dielectric strength no failure immerse the capacitor in a solution of ethanol (jis-k-8101) and rosin (jis-k-5902) (25% rosin in weight proportion). preheat at 80 to 120 ? c for 10 to 30 seconds. after preheating, immerse in eutectic solder solution for 2 0.5 seconds at 230 5 ? c or sn-3.0ag-0.5cu solder solution for 2 0.5 seconds at 245 5 ? c. 13 solderability of termination 75% of the terminations are to be soldered evenly and continuously. gnm series specifications and test methods (1) char. 25v min. 0.025 max. 16v 0.035 max. 10v 0.035 max. 6.3v 0.05 max. r7, r6, c7 char. 25v min. 0.025 max. 16v 0.035 max. 10v 0.035 max. 6.3v 0.05 max. r7, r6, c7 type a 2.0 0.05 2.0 0.05 2.0 0.05 2.5 0.05 b 0.5 0.05 0.6 0.05 0.7 0.05 0.8 0.05 c 0.32 0.05 0.5 0.05 0.3 0.05 0.4 0.05 d 0.32 0.05 0.5 0.05 0.2 0.05 0.4 0.05 gnm1m2 gnm212 gnm214 gnm314 solder the capacitor on the test jig (glass epoxy board) shown in fig. 2 using a eutectic solder. then apply a force in the direction shown in fig. 3 for 5 1 sec. the soldering should be done by the reflow method and should be conducted with care so that the soldering is uniform and free of defects such as heat shock. fig. 3 12 deflection appearance no marking defects capacitance change within 5% or 0.5pf (whichever is larger) within 10% (in mm) fig. 2 gnm pp 4 gnm pp 2 solder the capacitor to the test jig (glass epoxy board) in the same manner and under the same conditions as (10). the capacitor should be subjected to a simple harmonic motion having a total amplitude of 1.5mm, the frequency being varied uniformly between the approximate limits of 10 and 55hz. the frequency range, from 10 to 55hz and return to 10hz, should be traversed in approximately 1 minute. this motion should be applied for a period of 2 hours in each of 3 mutually perpendic- ular directions (total of 6 hours). 11 vibration resistance appearance no defects or abnormalities capacitance within the specified tolerance q/d.f. 30pf min.: q u 1000 30pf max.: q u 400+20c c: nominal capacitance (pf) no. test method specifications temperature compensating type high dielectric type item 100 1.0 5.0 b a \ ` - 40 c d 100 1.0 t=0.8mm 5.0 b a \ _ ` - 40 c d capacitance meter flexure : v 1 20 50 r230 pressurizing speed: 1.0mm/sec. pressurize 45 45 ! note 1. this specifications and test methods is downloaded from the website of murata manufacturing co.,ltd. therefore, it's specifi cations are subject to change or our products in it may be discontinued without advance notice. 0. please check with our sales representatives or product engineers before ordering. 2. this specifications and test methods has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product 0. specifications before ordering. gnm series specifications and test methods (1) 71 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. when no "*" is added in pns table, please refer to gnm series specifications and test methods (1). when "*" is added in pns table, please refer to gnm series specifications and test methods (2). for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
continued from the preceding page. continued on the following page. apply the rated voltage at 40 2 ? c and 90 to 95% humidity for 500 12 hours. remove and let sit for 24 2 hours at room temperature, then measure. the charge/discharge current is less than 50ma. 17 humidity load the measured and observed characteristics should satisfy the specifications in the following table. appearance no marking defects capacitance change within 7.5% or 0.75pf (whichever is larger) r7, r6, c7: within 12.5% q/d.f. 30pf and over: q u 200 30pf and below: q u 100+10c/3 c: nominal capacitance (pf) i.r. more than 500m ? or 25 ? f (whichever is smaller) set the capacitor at 40 2 ? c and 90 to 95% humidity for 500 12 hours. remove and let sit for 24 2 hours at room temperature, then measure. 16 humidity steady state the measured and observed characteristics should satisfy the specifications in the following table. appearance no marking defects capacitance change within 5% or 0.5pf (whichever is larger) r7, r6, c7: within 12.5% q/d.f. 30pf and over: q u 350 10pf and over, 30pf and below: q u 275+5c/2 10pf and below: q u 200+10c c: nominal capacitance (pf) i.r. more than 1,000m ? or 50 ? f (whichever is smaller) fix the capacitor to the supporting jig in the same manner and under the same conditions as (10). perform the five cycles according to the four heat treatments listed in the following table. let sit for 24 2 hours (temperature compensating type) or 48 4 hours (high dielectric constant type) at room temperature, then measure. initial measurement for high dielectric constant type perform a heat treatment at 150+0/-10 ? c for one hour and then let sit for 24 2 hours at room temperature. perform the initial measurement. 15 temperature cycle the measured and observed characteristics should satisfy the specifications in the following table. appearance no marking defects capacitance change within 2.5% or 0.25pf (whichever is larger) r7, r6, c7: within 7.5% q/d.f. 30pf min.: q u 1000 30pf max.: q u 400+20c c:nominal capacitance (pf) i.r. more than 10,000m ? or 500 ? f (whichever is smaller) dielectric strength no failure gnm series specifications and test methods (1) step temp. ( ? c) time (min.) 1 min. operating temp.+0/e3 30 3 2 room temp. 2 to 3 3 max. operating temp. +3/e0 30 3 4 room temp. 2 to 3 char. 25v min. 0.025 max. 16v 0.035 max. 10v 0.035 max. 6.3v 0.05 max. r7, r6, c7 char. 25v min. 0.05 max. 16v 0.05 max. 10v/6.3v 0.05 max. r7, r6, c7 char. 25v min. 0.05 max. 16v 0.05 max. 10v/6.3v 0.05 max. r7, r6, c7 no. test method specifications temperature compensating type high dielectric type item ! note 1. this specifications and test methods is downloaded from the website of murata manufacturing co.,ltd. therefore, it's specifi cations are subject to change or our products in it may be discontinued without advance notice. 0. please check with our sales representatives or product engineers before ordering. 2. this specifications and test methods has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product 0. specifications before ordering. gnm series specifications and test methods (1) 72 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. when no "*" is added in pns table, please refer to gnm series specifications and test methods (1). when "*" is added in pns table, please refer to gnm series specifications and test methods (2). for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
continued from the preceding page. apply 200% of the rated voltage for 1000 12 hours at the maximum operating temperature 3 ? c. let sit for 24 2 hours at room temperature, then measure. the charge/discharge current is less than 50ma. initial measurement for high dielectric constant type. apply 200% of the rated dc voltage for one hour at the maximum operating temperature 3 ? c. remove and let sit for 24 2 hours at room temperature. perform initial measurement. 18 high temperature load the measured and observed characteristics should satisfy the specifications in the following table. appearance no marking defects capacitance change within 3% or 0.3pf (whichever is larger) r7, r6, c7: within 12.5% q/d.f. 30pf and over: q u 350 10pf and over, 30pf and below: q u 275+5c/2 10pf and below: q u 200+10c c: nominal capacitance (pf) i.r. more than 1,000m ? or 50 ? f (whichever is smaller) no. test method specifications temperature compensating type high dielectric type item char. nominal values (ppm/ ? c) *1 0 30 5c max. 0.58 min. e0.24 max. 0.40 min. e0.17 max. e55 ? c capacitance change from 25 ? c (%) e30 ? c e10 ? c 0.25 min. e0.11 *1: nominal values denote the temperature coefficient within a range of 25 to 125 ? c. table a gnm series specifications and test methods (1) char. 25v min. 0.04 max. 16v 0.05 max. 10v/6.3v 0.05 max. r7, r6, c7 ! note 1. this specifications and test methods is downloaded from the website of murata manufacturing co.,ltd. therefore, it's specifi cations are subject to change or our products in it may be discontinued without advance notice. 0. please check with our sales representatives or product engineers before ordering. 2. this specifications and test methods has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product 0. specifications before ordering. gnm series specifications and test methods (1) 73 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. when no "*" is added in pns table, please refer to gnm series specifications and test methods (1). when "*" is added in pns table, please refer to gnm series specifications and test methods (2). for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
solder the capacitor to the test jig (glass epoxy board) in the same manner and under the same conditions as (10). the capacitor should be subjected to a simple harmonic motion having a total amplitude of 1.5mm, the frequency being varied uniformly between the approximate limits of 10 and 55hz. the frequency range, from 10 to 55hz and return to 10hz, should be traversed in approximately 1 minute. this motion should be applied for a period of 2 hours in each of 3 mutually perpendicular directions (total of 6 hours). 11 vibration appearance no defects or abnormalities capacitance within the specified tolerance d.f. 0.1 max.* 3 * 3 however 0.125 max. for table 3 items. continued on the following page. temperature ( ? c) step 25 2 e55 3 25 2 85 3 25 2 1 2 3 4 5 temp. range char. e55 to +85 ? c reference temp. 25 ? c cap. change within 15% r6 a type 0.2 0.5 0.6 0.6 0.8 b 0.96 1.6 1.8 2.0 2.5 c 0.25 0.32 0.5 0.25 0.4 d 0.2 0.32 0.5 0.25 0.4 gnm0m2 gnm1m2 gnm212 gnm214 gnm314 solder the capacitor to the test jig (glass epoxy board) shown in fig. 1 using a eutectic solder. then apply 5n (gnm0m2: 2n) force in parallel with the test jig for 10 1 sec. the soldering should be done either with an iron or using the reflow method and should be conducted with care so that the soldering is uniform and free of defects such as heat shock. (in mm) 10 adhesive strength of termination no removal of the terminations or other defects should occur. the capacitance change should be measured after 5 min.at each specified temperature stage. the ranges of capacitance change compared with the 25 ? c value over the temperature ranges shown in the table should be within the specified ranges. initial measurement for high dielectric constant type. perform a heat treatment at 150+0/-10 ? c for one hour and then set for 24 2 hours at room temperature. perform the initial measurement. 9 capacitance temperature characteristics 8 dissipation factor (d.f.) 0.1 max.* 3 table 3 * 3 however 0.125 max. for table 3 items. the capacitance/d.f. should be measured at 25 ? c at the frequency and voltage shown in the table. table 1 table 2 7 capacitance within the specified tolerance the insulation resistance should be measured with a dc voltage not exceeding the rated voltage at 25 ? c and 75%rh max. and within 1 minute of charging. 6 insulation resistance 50 ? f min. no failure should be observed when 250% of the rated voltage is applied between the terminations for 1 to 5 seconds, provided the charge/discharge current is less than 50ma. 5 dielectric strength no defects or abnormalities using calipers 4 dimensions within the specified dimension visual inspection 3 appearance no defects or abnormalities the rated voltage is defined as the maximum voltage that may be applied continuously to the capacitor. when ac voltage is superimposed on dc voltage, v p-p or v o-p , whichever is larger, should be maintained within the rated voltage range. 2 rated voltage see the previous pages. 1 operating temperature range r6: e55 ? c to +85 ? c measuring frequency nominal capacitance 1 0.1khz 1 0.1khz 1 0.1khz 1 0.1khz measuring voltage 1.0 0.2vrms 0.5 0.1vrms 0.5 0.1vrms 1.0 0.1vrms c v 10 f * 1 (10v min.) c v 10 f * 2 (6.3v max.) * 1 for items in table1 * 2 for items in table2 gnm series specifications and test methods (2) a solder resist copper foil c d b b a c d solder resist copper foil no. test method specifications item fig. 1 gnm pp 4 gnm pp 2 gnm0m2 r6 1a 104 gnm0m2 r6 1c 104 gnm1m2 r6 1a 105/225 gnm1m2 r6 1c 224/105 gnm0m2 r6 0j 103/223/473 gnm212 r6 0j 225 gnm214 r6 0j 105 gnm0m2 r6 103/223/473/104 gnm1m2 r6 0j 105/225 gnm1m2 r6 1a 105mea4 gnm1m2 r6 1a 225 gnm212 r6 0j 225 gnm212 r6 1a 225 gnm214 r6 0j 225 ! note 1. this specifications and test methods is downloaded from the website of murata manufacturing co.,ltd. therefore, it's specifi cations are subject to change or our products in it may be discontinued without advance notice. 0. please check with our sales representatives or product engineers before ordering. 2. this specifications and test methods has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product 0. specifications before ordering. gnm series specifications and test methods (2) 74 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. when no "*" is added in pns table, please refer to gnm series specifications and test methods (1). when "*" is added in pns table, please refer to gnm series specifications and test methods (2). for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
continued from the preceding page. gnm series specifications and test methods (2) 100 1.0 5.0 b a 40 c d 100 1.0 5.0 b a 40 c d capacitance meter flexure : v 1 20 50 r230 pressurizing speed: 1.0mm/sec. pressurize 45 45 apply 150% (gnm1m2r61a225/1c105: 125% of the rated voltage) of the rated voltage for 1000 12 hours at the maximum operating temperature 3 ? c. let sit for 24 2 hours at room temperature, then measure. the charge/discharge current is less than 50ma. initial measurement perform a heat treatment at 150 +0/-10 ? c for one hour and then let sit for 24 2 hours at room temperature. perform the initial measurement. measurement after test perform a heat treatment at 150 +0/-10 ? c for one hour and then let sit for 24 2 hours at room temperature, then measure. 17 durability appearance no marking defects capacitance change r6: within 12.5% d.f. 0.2 max. i.r. 25 ? f min. apply the rated voltage at 40 2 ? c and 90 to 95% humidity for 500 12 hours. the charge/discharge current is less than 50ma. initial measurement perform a heat treatment at 150 +0/-10 ? c for one hour and then let sit for 24 2 hours at room temperature. perform the initial measurement. measurement after test perform a heat treatment at 150 +0/-10 ? c for one hour and then let sit for 24 2 hours at room temperature, then measure. 16 high temperature high humidity (steady) appearance no marking defects capacitance change r6: within 12.5% d.f. 0.2 max. i.r. 12.5 ? f min. fix the capacitor to the supporting jig in the same manner and under the same conditions as (10). perform the five cycles according to the four heat treatments listed in the following table. let sit for 24 2 hours at room temperature, then measure. initial measurement perform a heat treatment at 150 +0/-10 ? c for one hour and then let sit for 24 2 hours at room temperature. perform the initial measurement. 15 temperature cycle appearance no marking defects capacitance change r6* 5 : within 12.5% * 5 gnm0m2r60g105, gnm0m2r60j103/223/473/104, gnm0m2r61a103/223/473/104, gnm0m2r61c103/223/473/104, gnm1m2r61a105: within 15% d.f. 0.1 max. * 3 * 3 however 0.125 max. for table 3 items. i.r. 50 ? f min. dielectric strength no failure preheat the capacitor at 120 to 150 ? c for 1 minute. immerse the capacitor in a eutectic solder or sn-3.0ag-0.5cu solder solution at 270 5 ? c for 10 0.5 seconds. let sit at room temperature for 24 2 hours, then measure. initial measurement perform a heat treatment at 150 +0/-10 ? c for one hour and then let sit for 24 2 hours at room temperature. perform the initial measurement. 14 resistance to soldering heat appearance no marking defects capacitance change r6* 4 : within 7.5% * 4 gnm0m2r60g105: within +15/-7.5% d.f. 0.1 max. * 3 * 3 however 0.125 max. for table 3 items. i.r. 50 ? f min. dielectric strength no failure immerse the capacitor in a solution of ethanol (jis-k-8101) and rosin (jis-k-5902) (25% rosin in weight proportion). preheat at 80 to 120 ? c for 10 to 30 seconds. after preheating, immerse in eutectic solder solution for 2 0.5 seconds at 230 5 ? c or sn-3.0ag-0.5cu solder solution for 2 0.5 seconds at 245 5 ? c. 13 solderability of termination 75% of the terminations are to be soldered evenly and continuously. solder the capacitor to the test jig (glass epoxy board) shown in fig. 2 using a eutectic solder. then apply a force in the direction shown in fig. 3. the soldering should be done by the reflow method and should be conducted with care so that the soldering is uniform and free of defects such as heat shock. 12 deflection appearance no marking defects capacitance change within 10% no. test method specifications item fig. 3 fig. 2 thickness: 0.8mm # gnm pp 4 # gnm pp 2 1 step min. operating temp. 30 3 2 room temp. 2 to 3 3 min. operating temp. 30 3 4 room temp. 2 to 3 temp. ( ? c) time (min.) a type 2.0 0.05 2.0 0.05 2.0 0.05 2.0 0.05 2.5 0.05 b 0.2 0.05 0.5 0.05 0.6 0.05 0.7 0.05 0.8 0.05 c 0.2 0.05 0.32 0.05 0.5 0.05 0.3 0.05 0.4 0.05 d 0.25 0.05 0.32 0.05 0.5 0.05 0.2 0.05 0.4 0.05 gnm0m2 gnm1m2 gnm212 gnm214 gnm314 (in mm) ! note 1. this specifications and test methods is downloaded from the website of murata manufacturing co.,ltd. therefore, it's specifi cations are subject to change or our products in it may be discontinued without advance notice. 0. please check with our sales representatives or product engineers before ordering. 2. this specifications and test methods has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product 0. specifications before ordering. gnm series specifications and test methods (2) 75 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. when no "*" is added in pns table, please refer to gnm series specifications and test methods (1). when "*" is added in pns table, please refer to gnm series specifications and test methods (2). for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
76 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. chip monolithic ceramic capacitors low esl lll/llr/lla/llm series n features 1. low esl, good for noise reduction for high frequency 2. small, high cap n applications decoupling solution for "chip sets", such as mobile/fpd tv n features 1. good solution for anti resonance reduction with controlled esr. 2. suitable for high speed ic decoupling due to low inductance type. 3. 4 types of esr are available. n applications 1. all kind of ic package (network processor, media processor, etc) 2. circuit that has anti-resonance part number t dimensions (mm) 0.6 max. 0.85 0.1 0.7 0.1 w 0.8 0.1 1.25 0.1 1.6 0.15 l 1.6 0.1 2.0 0.1 3.2 0.15 1.15 0.1 0.6 0.1 lll185 0.3 0.05 0.5 0.05 1.0 0.05 lll153 0.5 +0.05/-0.1 0.8 0.15 1.6 0.15 llr185 lll216 0.5 +0/-0.15 lll215 lll219 lll317 0.5 +0/-0.15 lll315 lll31m l w t
capacitance table 77 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. reversed geometry low esl type x7r(r7)/x7s(c7)/x6s(c8)/x5r(r6) characteristics 0.5x1.0 ( 15 ) <0204> 0.8x1.6 ( 18 ) <0306> 1.25x2.0 ( 21 ) <0508> 1.6x3.2 ( 31 ) <0612> 6.3 ( 0j ) 5 ex.5: t dimension [mm] lxw [mm] rated voltage [vdc] capacitance 2200pf( 222 ) 4700pf( 472 ) 10000pf( 103 ) 22000pf( 223 ) 47000pf( 473 ) 0.10 f( 104 ) 0.22 f( 224 ) 0.47 f( 474 ) 1.0 f( 105 ) 2.2 f( 225 ) 4.7 f( 475 ) 10 f( 106 ) the part number code is shown in ( ) and unit is shown in [ ]. < >: eia [inch] code 4 ( 0g ) 50 ( 1h ) 25 ( 1e ) 16 ( 1c ) 10 ( 1a ) 4 ( 0g ) 50 ( 1h ) 25 ( 1e ) 16 ( 1c ) 10 ( 1a ) 4 ( 0g ) 50 ( 1h ) 25 ( 1e ) 16 ( 1c ) 10 ( 1a ) 6.3 ( 0j ) 3 3 3 5 5 5 5 5 5 5 5 5 5 6 6 6 6 96 9 9 9 7 7 7 m7 m m 7 7 m7 m7 m m reversed geometry low esl type x7r(r7)/x7s(c7) characteristics-low profile 1.6x3.2 ( 31 ) <0612> 0.8x1.6 ( 18 ) <0306> 1.25x2.0 ( 21 ) <0508> 25 ( 1e ) 5 ex.5: t dimension [mm] lxw [mm] rated voltage [vdc] capacitance 10000pf( 103 ) 22000pf( 223 ) 47000pf( 473 ) 0.10 f( 104 ) 0.22 f( 224 ) 0.47 f( 474 ) 1.0 f( 105 ) the part number code is shown in ( ) and unit is shown in [ ]. < >: eia [inch] code 16 ( 1c ) 10 ( 1a ) 4 ( 0g ) 50 ( 1h ) 25 ( 1e ) 16 ( 1c ) 10 ( 1a ) 6.3 ( 0j ) 4 ( 0g ) 50 ( 1h ) 25 ( 1e ) 16 ( 1c ) 10 ( 1a ) 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 controlled esr low esl type x7s(c7) characteristics 0.8x1.6 ( 18 ) <0306> 5 ex.5: t dimension [mm] lxw [mm] rated voltage [vdc] esr [m ? ] capacitance 1.0 f( 105 ) the part number code is shown in ( ) and unit is shown in [ ]. < >: eia [inch] code 4 ( 0g ) 100 ( e01 ) 220 ( e03 ) 470 ( e05 ) 1000 ( e07 ) 5555 for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
capacitance table 78 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. eight terminals low esl type x7s(c7)/x7r(r7) characteristics 1.6x0.8 ( 18 ) <0603> 2.0x1.25 ( 21 ) <0805> 3.2x1.6 ( 31 ) <1206> 4 ( 0g ) 5 ex.5: t dimension [mm] lxw [mm] rated voltage [vdc] capacitance 10000pf( 103 ) 22000pf( 223 ) 47000pf( 473 ) 0.10 f( 104 ) 0.22 f( 224 ) 0.47 f( 474 ) 1.0 f( 105 ) 2.2 f( 225 ) 4.7 f( 475 ) the part number code is shown in ( ) and unit is shown in [ ]. < >: eia [inch] code 25 ( 1e ) 16 ( 1c ) 10 ( 1a ) 6.3 ( 0j ) 4 ( 0g ) 16 ( 1c ) 10 ( 1a ) 4 ( 0g ) 5 5 5 5 5 9 9 9 9 9 9 9 9 9 9 9 9 m9 m9 eight terminals low esl type x7r(r7)/x7s(c7) characteristics-low profile 2.0x1.25 ( 21 ) <0805> 3.2x1.6 ( 31 ) <1206> 5 ex.5: t dimension [mm] lxw [mm] rated voltage [vdc] capacitance 10000pf( 103 ) 22000pf( 223 ) 47000pf( 473 ) 0.10 f( 104 ) 0.22 f( 224 ) 0.47 f( 474 ) 1.0 f( 105 ) 2.2 f( 225 ) 4.7 f( 475 ) the part number code is shown in ( ) and unit is shown in [ ]. < >: eia [inch] code 25 ( 1e ) 16 ( 1c ) 10 ( 1a ) 6.3 ( 0j ) 4 ( 0g ) 16 ( 1c ) 10 ( 1a ) 6.3 ( 0j ) 5 5 5 5 5 5 5 5 5 5 5 5 5 ten terminals low esl type x7r(r7)/x7s(c7) characteristics-low profile 2.0x1.25 ( 21 ) <0805> 3.2x1.6 ( 31 ) <1206> 5 ex.5: t dimension [mm] lxw [mm] rated voltage [vdc] capacitance 10000pf( 103 ) 22000pf( 223 ) 47000pf( 473 ) 0.10 f( 104 ) 0.22 f( 224 ) 0.47 f( 474 ) 1.0 f( 105 ) 2.2 f( 225 ) the part number code is shown in ( ) and unit is shown in [ ]. < >: eia [inch] code 25 ( 1e ) 16 ( 1c ) 6.3 ( 0j ) 4 ( 0g ) 16 ( 1c ) 10 ( 1a ) 6.3 ( 0j ) 5 5 5 5 5 5 5 5 5 5 5 5 for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
79 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. lll153 series 4v/0.47 f(l: 0.5+0.07/-0.03mm) the part number code is shown in ( ) and unit is shown in [ ]. < >: eia [inch] code * please refer to lll/llr/lla/llm series specifications and test method (2). lxw [mm] rated volt. [vdc] capacitance tolerance part number 6.3( 0j ) lll153c80j104me01e* lll153c80j224me14e* 4( 0g ) lll153c70g474me17e* 0.5x1.0( 15 )<0204> 0.10 f( 104 ) 0.22 f( 224 ) 0.47 f( 474 ) 20%( m ) 20%( m ) 20%( m ) lxw [mm] rated volt. [vdc] capacitance tolerance part number 50( 1h ) lll185r71h222ma01l lll185r71h472ma01l 25( 1e ) lll185r71e103ma01l lll185r71e223ma01l 16( 1c ) lll185r71c473ma01l 10( 1a ) lll185r71a104ma01l lll185r71a224ma01l 0.8x1.6( 18 )<0306> 2200pf( 222 ) 4700pf( 472 ) 10000pf( 103 ) 22000pf( 223 ) 47000pf( 473 ) 0.10 f( 104 ) 0.22 f( 224 ) 20%( m ) 20%( m ) 20%( m ) 20%( m ) 20%( m ) 20%( m ) 20%( m ) lxw [mm] rated volt. [vdc] capacitance tolerance part number 4( 0g ) lll185c70g474ma01l lll185c70g105me02l* lll185c70g225me01l* 0.8x1.6( 18 )<0306> 0.47 f( 474 ) 1.0 f( 105 ) 2.2 f( 225 ) 20%( m ) 20%( m ) 20%( m ) lxw [mm] rated volt. [vdc] capacitance tolerance part number 50( 1h ) lll216r71h103ma01l lll216r71h223ma01l 25( 1e ) lll216r71e473ma01l lll216r71e104ma01l 16( 1c ) lll219r71c224ma01l 10( 1a ) lll216r71a224ma01l lll219r71a474ma01l lll219r71a105ma01l 1.25x2.0( 21 )<0508> 10000pf( 103 ) 22000pf( 223 ) 47000pf( 473 ) 0.10 f( 104 ) 0.22 f( 224 ) 0.47 f( 474 ) 1.0 f( 105 ) 20%( m ) 20%( m ) 20%( m ) 20%( m ) 20%( m ) 20%( m ) 20%( m ) lxw [mm] rated volt. [vdc] capacitance tolerance part number 4( 0g ) lll219c70g225ma01l 1.25x2.0( 21 )<0508> 2.2 f( 225 ) 20%( m ) reversed geometry low esl type x7r(r7)/x7s(c7)/x6s(c8) characteristics ll l 15 3 c8 0j 104 m e01 e packaging code in part number shows std 180mm reel taping. q product id w series e dimensions (lxw) r dimension (t) t temperature characteristics y rated voltage u capacitance i capacitance tolerance o individual specification code !0 packaging (part number) w q e r t y u i o !0 for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
80 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. the part number code is shown in ( ) and unit is shown in [ ]. < >: eia [inch] code * please refer to lll/llr/lla/llm series specifications and test method (2). the part number code is shown in ( ) and unit is shown in [ ]. < >: eia [inch] code lxw [mm] rated volt. [vdc] capacitance tolerance part number 50( 1h ) lll317r71h103ma01l lll317r71h223ma01l lll317r71h473ma01l lll31mr71h104ma01l 25( 1e ) lll317r71e104ma01l lll31mr71e224ma01l lll31mr71e474ma01l 16( 1c ) lll317r71c224ma01l lll317r71c474ma01l lll31mr71c105ma01l 10( 1a ) lll317r71a105ma01l lll31mr71a225ma01l 1.6x3.2( 31 )<0612> 10000pf( 103 ) 22000pf( 223 ) 47000pf( 473 ) 0.10 f( 104 ) 0.22 f( 224 ) 0.47 f( 474 ) 1.0 f( 105 ) 2.2 f( 225 ) 20%( m ) 20%( m ) 20%( m ) 20%( m ) 20%( m ) 20%( m ) 20%( m ) 20%( m ) lxw [mm] rated volt. [vdc] capacitance tolerance part number 6.3( 0j ) lll317r70j225ma01l lll31mr70j475ma01l lll31mr60j106me01l* 1.6x3.2( 31 )<0612> 2.2 f( 225 ) 4.7 f( 475 ) 10 f( 106 ) 20%( m ) 20%( m ) 20%( m ) reversed geometry low esl type x7r(r7)/x5r(r6) characteristics lxw [mm] rated volt. [vdc] capacitance tolerance part number 25( 1e ) lll185r71e103ma11l 16( 1c ) lll185r71c223ma11l lll185r71c473ma11l 10( 1a ) lll185r71a104ma11l 4( 0g ) lll185c70g224ma11l 0.8x1.6( 18 )<0306> 10000pf( 103 ) 22000pf( 223 ) 47000pf( 473 ) 0.10 f( 104 ) 0.22 f( 224 ) 20%( m ) 20%( m ) 20%( m ) 20%( m ) 20%( m ) lxw [mm] rated volt. [vdc] capacitance tolerance part number 50( 1h ) lll215r71h103ma11l 25( 1e ) lll215r71e223ma11l 16( 1c ) lll215r71c473ma11l lll215r71c104ma11l 10( 1a ) lll215r71a224ma11l 1.25x2.0( 21 )<0508> 10000pf( 103 ) 22000pf( 223 ) 47000pf( 473 ) 0.10 f( 104 ) 0.22 f( 224 ) 20%( m ) 20%( m ) 20%( m ) 20%( m ) 20%( m ) lxw [mm] rated volt. [vdc] capacitance tolerance part number 6.3( 0j ) lll215r70j474ma11l 4( 0g ) lll215c70g105ma11l 1.25x2.0( 21 )<0508> 0.47 f( 474 ) 1.0 f( 105 ) 20%( m ) 20%( m ) reversed geometry low esl type x7r(r7)/x7s(c7) characteristics-low profile ll l 31 7 r7 1h 103 m a01 l packaging code in part number shows std 180mm reel taping. q product id w series e dimensions (lxw) r dimension (t) t temperature characteristics y rated voltage u capacitance i capacitance tolerance o individual specification code !0 packaging (part number) w q e r t y u i o !0 for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
81 ! note ?please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. ?this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. lxw [mm] rated volt. [vdc] capacitance tolerance part number 50( 1h ) lll315r71h103ma11l lll315r71h223ma11l 25( 1e ) lll315r71e473ma11l lll315r71e104ma11l 16( 1c ) lll315r71c224ma11l 10( 1a ) lll315r71a474ma11l 1.6x3.2( 31 )<0612> 10000pf( 103 ) 22000pf( 223 ) 47000pf( 473 ) 0.10 f( 104 ) 0.22 f( 224 ) 0.47 f( 474 ) 20%( m ) 20%( m ) 20%( m ) 20%( m ) 20%( m ) 20%( m ) reversed geometry low esl type x7r(r7) characteristics-low profile lxw [mm] rated volt. [vdc] esr [m ] capacitance tolerance part number 100( e01 ) llr185c70g105me01l* 220( e03 ) llr185c70g105me03l* 470( e05 ) llr185c70g105me05l* 1000( e07 ) 4( 0g ) llr185c70g105me07l* 0.8x1.6( 18 )<0306> 1.0 f( 105 ) 20%( m ) controlled esr low esl type x7s(c7) characteristics lxw [mm] rated volt. [vdc] capacitance tolerance part number 4( 0g ) lla185c70g104ma01l lla185c70g224ma01l lla185c70g474ma01l lla185c70g105me01l* lla185c70g225me16l* 1.6x0.8( 18 )<0603> 0.10 f( 104 ) 0.22 f( 224 ) 0.47 f( 474 ) 1.0 f( 105 ) 2.2 f( 225 ) 20%( m ) 20%( m ) 20%( m ) 20%( m ) 20%( m ) lxw [mm] rated volt. [vdc] capacitance tolerance part number 25( 1e ) lla219r71e103ma01l lla219r71e223ma01l lla219r71e473ma01l 16( 1c ) lla219r71c104ma01l lla219r71c224ma01l 10( 1a ) lla219r71a474ma01l 6.3( 0j ) lla219r70j105ma01l 2.0x1.25( 21 )<0805> 10000pf( 103 ) 22000pf( 223 ) 47000pf( 473 ) 0.10 f( 104 ) 0.22 f( 224 ) 0.47 f( 474 ) 1.0 f( 105 ) 20%( m ) 20%( m ) 20%( m ) 20%( m ) 20%( m ) 20%( m ) 20%( m ) lxw [mm] rated volt. [vdc] capacitance tolerance part number 4( 0g ) lla219c70g225ma01l lla219c70g475me01l* 2.0x1.25( 21 )<0805> 2.2 f( 225 ) 4.7 f( 475 ) 20%( m ) 20%( m ) eight terminals low esl type x7r(r7)/x7s(c7) characteristics the part number code is shown in ( ) and unit is shown in [ ]. < >: eia [inch] code * please refer to lll/llr/lla/llm series specifications and test method (2). the part number code is shown in ( ) and unit is shown in [ ]. < >: eia [inch] code * please refer to lll/llr/lla/llm series specifications and test method (2). the part number code is shown in ( ) and unit is shown in [ ]. < >: eia [inch] code for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
82 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. the part number code is shown in ( ) and unit is shown in [ ]. < >: eia [inch] code the part number code is shown in ( ) and unit is shown in [ ]. < >: eia [inch] code * please refer to lll/llr/lla/llm series specifications and test method (2). lxw [mm] rated volt. [vdc] capacitance tolerance part number 25( 1e ) lla215r71e103ma14l lla215r71e223ma14l 16( 1c ) lla215r71c473ma14l lla215r71c104ma14l 10( 1a ) lla215r71a224ma14l 6.3( 0j ) lla215r70j474ma14l 2.0x1.25( 21 )<0805> 10000pf( 103 ) 22000pf( 223 ) 47000pf( 473 ) 0.10 f( 104 ) 0.22 f( 224 ) 0.47 f( 474 ) 20%( m ) 20%( m ) 20%( m ) 20%( m ) 20%( m ) 20%( m ) lxw [mm] rated volt. [vdc] capacitance tolerance part number 4( 0g ) lla215c70g105ma14l lla215c70g225me11l* lla215c70g475me19l* 2.0x1.25( 21 )<0805> 0.22 f( 224 ) 0.47 f( 474 ) 1.0 f( 105 ) 2.2 f( 225 ) 4.7 f( 475 ) 20%( m ) 20%( m ) 20%( m ) 20%( m ) 20%( m ) 16( 1c ) lla315r71c224ma14l 10( 1a ) lla315r71a474ma14l 6.3( 0j ) lla315r70j105ma14l lla315r70j225ma14l 3.2x1.6( 31 )<1206> eight terminals low esl type x7r(r7)/x7s(c7) characteristics-low profile lxw [mm] rated volt. [vdc] capacitance tolerance part number 16( 1c ) lla319r71c104ma01l lla319r71c224ma01l lla319r71c474ma01l lla31mr71c105ma01l 10( 1a ) lla319r71a105ma01l lla31mr71a225ma01l 4( 0g ) lla319r70g225ma01l 3.2x1.6( 31 )<1206> 0.10 f( 104 ) 0.22 f( 224 ) 0.47 f( 474 ) 1.0 f( 105 ) 2.2 f( 225 ) 20%( m ) 20%( m ) 20%( m ) 20%( m ) 20%( m ) eight terminals low esl type x7r(r7) characteristics lxw [mm] rated volt. [vdc] capacitance tolerance part number 25( 1e ) llm215r71e103ma11l llm215r71e223ma11l 16( 1c ) llm215r71c473ma11l llm215r71c104ma11l 6.3( 0j ) llm215r70j224ma11l llm215r70j474ma11l 4( 0g ) llm215c70g105ma11l llm215c70g225me11l* 2.0x1.25( 21 )<0805> 10000pf( 103 ) 22000pf( 223 ) 47000pf( 473 ) 0.10 f( 104 ) 0.22 f( 224 ) 0.47 f( 474 ) 1.0 f( 105 ) 2.2 f( 225 ) 20%( m ) 20%( m ) 20%( m ) 20%( m ) 20%( m ) 20%( m ) 20%( m ) 20%( m ) lxw [mm] rated volt. [vdc] capacitance tolerance part number 16( 1c ) llm315r71c104ma11l llm315r71c224ma11l 10( 1a ) llm315r71a474ma11l 6.3( 0j ) llm315r70j225ma11l 3.2x1.6( 31 )<1206> 0.10 f( 104 ) 0.22 f( 224 ) 0.47 f( 474 ) 2.2 f( 225 ) 20%( m ) 20%( m ) 20%( m ) 20%( m ) ten terminals low esl type x7r(r7)/x7s(c7) characteristics-low profile ll a 31 9 r7 1c 104 m a01 l packaging code in part number shows std 180mm reel taping. q product id w series e dimensions (lxw) r dimension (t) t temperature characteristics y rated voltage u capacitance i capacitance tolerance o individual specification code !0 packaging (part number) w q e r t y u i o !0 for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
continued on the following page. preheat the capacitor at 120 to 150 ? c for 1 minute. immerse the capacitor in a eutectic solder or sn-3.0ag-0.5cu solder solution at 270 5 ? c for 10 0.5 seconds. let sit at room temperature for 24 2 hours, then measure. initial measurement. perform a heat treatment at 150+0/e10 ? c for one hour and then let sit for 24 2 hours at room temperature. perform the initial measurement. 13 resistance to soldering heat appearance no marking defects capacitance change within 7.5% d.f. w.v.: 25v min.; 0.025 max. w.v.: 16v/10v max.; 0.035 max. w.v.: 6.3v max.; 0.05 max. i.r. more than 10,000m ? or 500 ? f (whichever is smaller) dielectric strength no failure immerse the capacitor in a solution of ethanol (jis-k-8101) and rosin (jis-k-5902) (25% rosin in weight proportion). preheat at 80 to 120 ? c for 10 to 30 seconds. after preheating, immerse in eutectic solder solution for 2 0.5 seconds at 230 5 ? c, or sn-3.0ag-0.5cu solder solution for 2 0.5 seconds at 245 5 ? c. 12 solderability of termination 75% of the terminations are to be soldered evenly and continuously. lll/lla/llm series specifications and test methods (1) step temperature ( ? c) 25 2 e55 3 25 2 125 3 25 2 1 2 3 4 5 char. temp. range ( ? c) e55 to +125 e55 to +125 reference temp. 25 ? c 25 ? c cap.change within 15% within 22% r7 c7 solder the capacitor to the test jig (glass epoxy board) in the same manner and under the same conditions as (10). the capacitor should be subjected to a simple harmonic motion having a total amplitude of 1.5mm, the frequency being varied uniformly between the approximate limits of 10 and 55hz. the frequency range, from 10 to 55hz and return to 10hz, should be traversed in approximately 1 minute. this motion should be applied for a period of 2 hours in each of 3 mutually perpendicular directions (total of 6 hours). 11 vibration resistance appearance no defects or abnormalities capacitance within the specified tolerance d.f. w.v.: 25v min.; 0.025 max. w.v.: 16v/10v max.; 0.035 max. w.v.: 6.3v max.; 0.05 max. solder the capacitor to the test jig (glass epoxy board) using a eutectic solder. then apply 10n* force in parallel with the test jig for 10 1 sec. the soldering should be done either with an iron or using the reflow method and should be conducted with care so that the soldering is uniform and free of defects such as heat shock. *5n (lll18 and lla/llm series) 10 adhesive strength of termination no removal of the terminations or other defect should occur. the capacitance change should be measured after 5 min. at each specified temperature stage. the ranges of capacitance change compared with the 25 ? c value over the temperature ranges shown in the table should be within the specified ranges. initial measurement. perform a heat treatment at 150+0/-10 ? c for one hour and then set for 24 2 hours at room temperature. perform the initial measurement. 9 capacitance temperature characteristics 8 dissipation factor (d.f.) w.v.: 25v min.; 0.025 max. w.v.: 16v/10v max.; 0.035 max. w.v.: 6.3v max.; 0.05 max. the capacitance/d.f. should be measured at 25 ? c at the frequency and voltage shown in the table. frequency: 1 0.1khz voltage: 1 0.2vrms *for lla185c70g474, the capacitance should be measured unsing a voltage of 0.5 0.1vrms. 7 capacitance within the specified tolerance the insulation resistance should be measured with a dc voltage not exceeding the rated voltage at 25 ? c and 75%rh max. and within 2 minutes of charging. 6 insulation resistance c v 0.047 f: more than 10,000m ? c g 0.047 f: more than 500 ? f c: normal capacitance no failure should be observed when 250% of the rated voltage is applied between the terminations for 1 to 5 seconds, provided the charge/discharge current is less than 50ma. 5 dielectric strength no defects or abnormalities using calipers 4 dimensions within the specified dimension visual inspection 3 appearance no defects or abnormalities the rated voltage is defined as the maximum voltage that may be applied continuously to the capacitor. when ac voltage is superimposed on dc voltage, v p-p or v o-p , whichever is larger, should be maintained within the rated voltage range. 2 rated voltage see the previous pages. 1 operating temperature range r7, c7: e55 to +125 ? c no. test method specifications item ! note 1. this specifications and test methods is downloaded from the website of murata manufacturing co.,ltd. therefore, it's specifi cations are subject to change or our products in it may be discontinued without advance notice. 0. please check with our sales representatives or product engineers before ordering. 2. this specifications and test methods has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product 0. specifications before ordering. lll/llr/lla/llm series specifications and test methods (1) 83 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. when no "*" is added in pns table, please refer to lll/llr/lla/llm series specifications and test methods (1). when "*" is added in pns table, please refer to lll/llr/lla/llm series specifications and test methods (2). for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
continued from the preceding page. apply 200% of the rated voltage for 1000 12 hours at the maximum operating temperature 3 ? c. let sit for 24 2 hours at room temperature, then measure. the charge/discharge current is less than 50ma. initial measurement. apply 200% of the rated dc voltage for one hour at the maximum operating temperature 3 ? c. remove and let sit for 24 2 hours at room temperature. perform initial measurement. 17 high temperature load appearance no marking defects capacitance change within 12.5% d.f. w.v.: 10v min.; 0.05 max. w.v.: 6.3v max.; 0.075 max. i.r. more than 1,000m ? or 50 ? f (whichever is smaller) apply the rated voltage at 40 2 ? c and 90 to 95% humidity for 500 12 hours. remove and let sit for 24 2 hours at room temperature, then measure. the charge/discharge current is less than 50ma. 16 humidity load appearance no marking defects capacitance change within 12.5% d.f. w.v.: 10v min.; 0.05 max. w.v.: 6.3v max.; 0.075 max. i.r. more than 500m ? or 25 ? f (whichever is smaller) set the capacitor at 40 2 ? c and 90 to 95% humidity for 500 12 hours. remove and let sit for 24 2 hours at room temperature, then measure. 15 humidity (steady state) appearance no marking defects capacitance change within 12.5% d.f. w.v.: 10v min.; 0.05 max. w.v.: 6.3v max.; 0.075 max. i.r. more than 1,000m ? or 50 ? f (whichever is smaller) fix the capacitor to the supporting jig in the same manner and under the same conditions as (10). perform the five cycles according to the four heat treatments listed in the following table. let sit for 24 2 hours at room temperature, then measure. initial measurement. perform a heat treatment at 150+0/e10 ? c for one hour and then let sit for 24 2 hours at room temperature. perform the initial measurement. 14 temperature cycle appearance no marking defects capacitance change within 7.5% d.f. w.v.: 25v min.; 0.025 max. w.v.: 16v/10v max.; 0.035 max. w.v.: 6.3v max.; 0.05 max. i.r. more than 10,000m ? or 500 ? f (whichever is smaller) dielectric strength no failure lll/lla/llm series specifications and test methods (1) step temp. ( ? c) time (min.) 1 min. operating temp. +0/e3 30 3 2 room temp. 2 to 3 3 max. operating temp. +3/e0 30 3 4 room temp. 2 to 3 no. test method specifications item ! note 1. this specifications and test methods is downloaded from the website of murata manufacturing co.,ltd. therefore, it's specifi cations are subject to change or our products in it may be discontinued without advance notice. 0. please check with our sales representatives or product engineers before ordering. 2. this specifications and test methods has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product 0. specifications before ordering. lll/llr/lla/llm series specifications and test methods (1) 84 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. when no "*" is added in pns table, please refer to lll/llr/lla/llm series specifications and test methods (1). when "*" is added in pns table, please refer to lll/llr/lla/llm series specifications and test methods (2). for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
preheat the capacitor at 120 to 150 ? c for 1 minute. immerse the capacitor in a eutectic solder or sn-3.0ag-0.5cu solder solution at 270 5 ? c for 10 0.5 seconds. let sit at room temperature for 24 2 hours, then measure. initial measurement. perform a heat treatment at 150+0/e10 ? c for one hour and then let sit for 24 2 hours at room temperature. perform the initial measurement. 13 resistance to soldering heat appearance no marking defects capacitance change r6, r7, c7, c8: within 7.5% d.f. r6, r7, c7, c8: 0.120 max. i.r. 50 ? f min. dielectric strength no failure immerse the capacitor in a solution of ethanol (jis-k-8101) and rosin (jis-k-5902) (25% rosin in weight proportion). preheat at 80 to 120 ? c for 10 to 30 seconds. after preheating, immerse in eutectic solder solution for 2 0.5 seconds at 230 5 ? c, or sn-3.0ag-0.5cu solder solution for 2 0.5 seconds at 245 5 ? c. 12 solderability of termination 75% of the terminations are to be soldered evenly and continuously. solder the capacitor to the test jig (glass epoxy board) in the same manner and under the same conditions as (10). the capacitor should be subjected to a simple harmonic motion having a total amplitude of 1.5mm, the frequency being varied uniformly between the approximate limits of 10 and 55hz. the frequency range, from 10 to 55hz and return to 10hz, should be traversed in approximately 1 minute. this motion should be applied for a period of 2 hours in each of 3 mutually perpendicular directions (total of 6 hours). 11 vibration appearance no defects or abnormalities capacitance within the specified tolerance d.f. r6, r7, c7, c8: 0.120 max. solder the capacitor to the test jig (glass epoxy board) using a eutectic solder. then apply 10n* force in parallel with the test jig for 10 1 sec. the soldering should be done either with an iron or using the reflow method and should be conducted with care so that the soldering is uniform and free of defects such as heat shock. *5n (lll15, lll18, llr18, lla, llm series) 10 adhesive strength of termination no removal of the terminations or other defect should occur. the capacitance change should be measured after 5 min. at each specified temperature stage. the ranges of capacitance change compared with the 25 ? c value over the temperature ranges shown in the table should be within the specified ranges. initial measurement. perform a heat treatment at 150+0/-10 ? c for one hour and then set for 24 2 hours at room temperature. perform the initial measurement. 9 capacitance temperature characteristics 8 dissipation factor (d.f.) r6, r7, c7, c8: 0.120 max. the capacitance/d.f. should be measured at 25 ? c at the frequency and voltage shown in the table. 7 capacitance within the specified tolerance the insulation resistance should be measured with a dc voltage not exceeding the rated voltage at 25 ? c and 75%rh max. and within 1 minute of charging. 6 insulation resistance 50 ? f min. no failure should be observed when 250% of the rated voltage is applied between the terminations for 1 to 5 seconds, provided the charge/discharge current is less than 50ma. 5 dielectric strength no defects or abnormalities using calipers 4 dimensions within the specified dimension visual inspection 3 appearance no defects or abnormalities the rated voltage is defined as the maximum voltage that may be applied continuously to the capacitor. when ac voltage is superimposed on dc voltage, v p-p or v o-p , whichever is larger, should be maintained within the rated voltage range. 2 rated voltage see the previous pages. 1 operating temperature range r6: e55 to +85 ? c r7, c7: e55 to +125 ? c c8: e55 to +105 ? c no. test method specifications item continued on the following page. temp. range ( ? c) char. e55 to +85 e55 to +125 e55 to +125 e55 to +105 reference temp. 25 ? c cap. change within 15% within 15% within 22% within 22% r6 r7 c7 c8 frequency capacitance 1 0.1khz 1 0.1khz 120 24hz voltage 1.0 0.2vrms 0.5 0.1vrms 0.5 0.1vrms c v 10 f (10v min.) c v 10 f (6.3v max.) c>10 f lll/llr/lla/llm series specifications and test methods (2) ! note 1. this specifications and test methods is downloaded from the website of murata manufacturing co.,ltd. therefore, it's specifi cations are subject to change or our products in it may be discontinued without advance notice. 0. please check with our sales representatives or product engineers before ordering. 2. this specifications and test methods has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product 0. specifications before ordering. lll/llr/lla/llm series specifications and test methods (2) 85 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. when no "*" is added in pns table, please refer to lll/llr/lla/llm series specifications and test methods (1). when "*" is added in pns table, please refer to lll/llr/lla/llm series specifications and test methods (2). for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
the esr should be measured at room temperature with the equivalent of hp4294a. * 17 esr within below esr value at frequency: 10 0.1mhz 100m ? : within 70 to 130m ? 220m ? : within 154 to 286m ? 470m ? : within 329 to 611m ? 1000m ? : within 700 to 1300m ? apply 150% of the rated voltage for 1000 12 hours at the maximum operating temperature 3 ? c. the charge/discharge current is less than 50ma. initial measurement perform a heat treatment at 150+0/e10 ? c for one hour and then let sit for 24 2 hours at room temperature. perform the initial measurement. measurement after test perform a heat treatment at 150+0/e10 ? c for one hour and then let sit for 24 2 hours at room temperature, then measure. 16 durability appearance no marking defects capacitance change r6, r7, c7, c8: within 12.5% * lll153c70g474: within 20% d.f. r6, r7, c7, c8: 0.2 max. i.r. 25 ? f min. apply the rated voltage at 40 2 ? c and 90 to 95% humidity for 500 12 hours. the charge/discharge current is less than 50ma. apply the rated dc voltage. initial measurement perform a heat treatment at 150+0/e10 ? c for one hour and then let sit for 24 2 hours at room temperature. perform the initial measurement. measurement after test perform a heat treatment at 150+0/e10 ? c for one hour and then let sit for 24 2 hours at room temperature, then measure. 15 high temperature high humidity (steady state) appearance no marking defects capacitance change r6, r7, c7, c8: within 12.5% d.f. r6, r7, c7, c8: 0.2 max. i.r. 12.5 ? f min. fix the capacitor to the supporting jig in the same manner and under the same conditions as (10).perform the five cycles according to the four heat treatments listed in the following table. let sit for 24 2 hours at room temperature, then measure. initial measurement perform a heat treatment at 150+0/e10 ? c for one hour and then let sit for 24 2 hours at room temperature. perform the initial measurement. 14 temperature sudden change appearance no marking defects capacitance change r6, r7, c7, c8: within 12.5% d.f. r6, r7, c7, c8: 0.120 max. i.r. 50 ? f min. dielectric strength no failure no. test method specifications item continued from the preceding page. lll/llr/lla/llm series specifications and test methods (2) 1 step min. operating temp. +0/e3 30 3 2 room temp. 2 to 3 3 min. operating temp. +0/e3 30 3 4 room temp. 2 to 3 temp. ( ? c) time (min.) * llr: this specification is only for llr type ! note 1. this specifications and test methods is downloaded from the website of murata manufacturing co.,ltd. therefore, it's specifi cations are subject to change or our products in it may be discontinued without advance notice. 0. please check with our sales representatives or product engineers before ordering. 2. this specifications and test methods has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product 0. specifications before ordering. lll/llr/lla/llm series specifications and test methods (2) 86 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. when no "*" is added in pns table, please refer to lll/llr/lla/llm series specifications and test methods (1). when "*" is added in pns table, please refer to lll/llr/lla/llm series specifications and test methods (2). for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
87 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. chip monolithic ceramic capacitors high-q type gjm series n features 1. mobile telecommunication and rf module, mainly 2. improvement of telephone call quality, low power consumption, yield ratio improvement. n applications vco, pa, mobile telecommunication l t part number lwt dimensions (mm) e g min. 1.0 0.05 0.5 0.05 0.15 to 0.35 0.3 0.5 0.05 gjm15 0.6 0.03 0.3 0.03 0.1 to 0.2 0.2 0.3 0.03 gjm03 w e e g for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
capacitance table 88 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. temperature compensating type c0g(5c)/c0h(6c) characteristics 0.6x0.3 ( 03 ) <0201> 1.0x0.5 ( 15 ) <0402> 25 ( 1e ) 3 ex.3: t dimension [mm] lxw [mm] rated voltage [vdc] capacitance 0.1pf( r10 ) 0.2pf( r20 ) 0.3pf( r30 ) 0.4pf( r40 ) 0.5pf( r50 ) 0.6pf( r60 ) 0.7pf( r70 ) 0.8pf( r80 ) 0.9pf( r90 ) 1.0pf( 1r0 ) 1.1pf( 1r1 ) 1.2pf( 1r2 ) 1.3pf( 1r3 ) 1.4pf( 1r4 ) 1.5pf( 1r5 ) 1.6pf( 1r6 ) 1.7pf( 1r7 ) 1.8pf( 1r8 ) 1.9pf( 1r9 ) 2.0pf( 2r0 ) 2.1pf( 2r1 ) 2.2pf( 2r2 ) 2.3pf( 2r3 ) 2.4pf( 2r4 ) 2.5pf( 2r5 ) 2.6pf( 2r6 ) 2.7pf( 2r7 ) 2.8pf( 2r8 ) 2.9pf( 2r9 ) 3.0pf( 3r0 ) 3.1pf( 3r1 ) 3.2pf( 3r2 ) 3.3pf( 3r3 ) 3.4pf( 3r4 ) 3.5pf( 3r5 ) 3.6pf( 3r6 ) 3.7pf( 3r7 ) 3.8pf( 3r8 ) 3.9pf( 3r9 ) 4.0pf( 4r0 ) 4.1pf( 4r1 ) 4.2pf( 4r2 ) 4.3pf( 4r3 ) 4.4pf( 4r4 ) 4.5pf( 4r5 ) 4.6pf( 4r6 ) 4.7pf( 4r7 ) 4.8pf( 4r8 ) 4.9pf( 4r9 ) 6.3 ( 0j ) 50 ( 1h ) 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 0.6x0.3 ( 03 ) <0201> 1.0x0.5 ( 15 ) <0402> 25 ( 1e ) lxw [mm] rated voltage [vdc] capacitance 5.0pf( 5r0 ) 5.1pf( 5r1 ) 5.2pf( 5r2 ) 5.3pf( 5r3 ) 5.4pf( 5r4 ) 5.5pf( 5r5 ) 5.6pf( 5r6 ) 5.7pf( 5r7 ) 5.8pf( 5r8 ) 5.9pf( 5r9 ) 6.0pf( 6r0 ) 6.1pf( 6r1 ) 6.2pf( 6r2 ) 6.3pf( 6r3 ) 6.4pf( 6r4 ) 6.5pf( 6r5 ) 6.6pf( 6r6 ) 6.7pf( 6r7 ) 6.8pf( 6r8 ) 6.9pf( 6r9 ) 7.0pf( 7r0 ) 7.1pf( 7r1 ) 7.2pf( 7r2 ) 7.3pf( 7r3 ) 7.4pf( 7r4 ) 7.5pf( 7r5 ) 7.6pf( 7r6 ) 7.7pf( 7r7 ) 7.8pf( 7r8 ) 7.9pf( 7r9 ) 8.0pf( 8r0 ) 8.1pf( 8r1 ) 8.2pf( 8r2 ) 8.3pf( 8r3 ) 8.4pf( 8r4 ) 8.5pf( 8r5 ) 8.6pf( 8r6 ) 8.7pf( 8r7 ) 8.8pf( 8r8 ) 8.9pf( 8r9 ) 9.0pf( 9r0 ) 9.1pf( 9r1 ) 9.2pf( 9r2 ) 9.3pf( 9r3 ) 9.4pf( 9r4 ) 9.5pf( 9r5 ) 9.6pf( 9r6 ) 9.7pf( 9r7 ) 9.8pf( 9r8 ) the part number code is shown in ( ) and unit is shown in [ ]. < >: eia [inch] code 6.3 ( 0j ) 50 ( 1h ) 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 0.6x0.3 ( 03 ) <0201> 1.0x0.5 ( 15 ) <0402> 25 ( 1e ) lxw [mm] rated voltage [vdc] capacitance 9.9pf( 9r9 ) 10pf( 100 ) 11pf( 110 ) 12pf( 120 ) 13pf( 130 ) 15pf( 150 ) 16pf( 160 ) 18pf( 180 ) 20pf( 200 ) 22pf( 220 ) 24pf( 240 ) 27pf( 270 ) 30pf( 300 ) 33pf( 330 ) 6.3 ( 0j ) 50 ( 1h ) 3 3 3 3 3 3 3 3 3 3 3 3 3 3 5 5 5 5 5 5 5 5 5 for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
89 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. the part number code is shown in ( ) and unit is shown in [ ]. < >: eia [inch] code lxw [mm] rated volt. [vdc] capacitance tolerance part number 25( 1e ) gjm0335c1er20wb01d gjm0335c1er20bb01d gjm0335c1er30wb01d gjm0335c1er30bb01d gjm0335c1er40wb01d gjm0335c1er40bb01d gjm0335c1er50wb01d gjm0335c1er50bb01d gjm0335c1er60wb01d gjm0335c1er60bb01d gjm0335c1er70wb01d gjm0335c1er70bb01d gjm0335c1er80wb01d gjm0335c1er80bb01d gjm0335c1er90wb01d gjm0335c1er90bb01d gjm0335c1e1r0wb01d gjm0335c1e1r0bb01d gjm0335c1e1r0cb01d gjm0335c1e1r1wb01d gjm0335c1e1r1bb01d gjm0335c1e1r1cb01d gjm0335c1e1r2wb01d gjm0335c1e1r2bb01d gjm0335c1e1r2cb01d gjm0335c1e1r3wb01d gjm0335c1e1r3bb01d gjm0335c1e1r3cb01d gjm0335c1e1r4wb01d gjm0335c1e1r4bb01d gjm0335c1e1r4cb01d gjm0335c1e1r5wb01d gjm0335c1e1r5bb01d gjm0335c1e1r5cb01d gjm0335c1e1r6wb01d gjm0335c1e1r6bb01d gjm0335c1e1r6cb01d gjm0335c1e1r7wb01d gjm0335c1e1r7bb01d gjm0335c1e1r7cb01d gjm0335c1e1r8wb01d gjm0335c1e1r8bb01d gjm0335c1e1r8cb01d gjm0335c1e1r9wb01d gjm0335c1e1r9bb01d gjm0335c1e1r9cb01d 50( 1h ) gjm1555c1hr10wb01d gjm1555c1hr10bb01d gjm1555c1hr20wb01d gjm1555c1hr20bb01d gjm1555c1hr30wb01d gjm1555c1hr30bb01d gjm1555c1hr40wb01d gjm1555c1hr40bb01d gjm1555c1hr50wb01d gjm1555c1hr50bb01d gjm1555c1hr60wb01d gjm1555c1hr60bb01d gjm1555c1hr70wb01d gjm1555c1hr70bb01d gjm1555c1hr80wb01d gjm1555c1hr80bb01d gjm1555c1hr90wb01d gjm1555c1hr90bb01d gjm1555c1h1r0wb01d gjm1555c1h1r0bb01d gjm1555c1h1r0cb01d gjm1555c1h1r1wb01d gjm1555c1h1r1bb01d gjm1555c1h1r1cb01d gjm1555c1h1r2wb01d gjm1555c1h1r2bb01d gjm1555c1h1r2cb01d gjm1555c1h1r3wb01d gjm1555c1h1r3bb01d gjm1555c1h1r3cb01d gjm1555c1h1r4wb01d gjm1555c1h1r4bb01d gjm1555c1h1r4cb01d gjm1555c1h1r5wb01d gjm1555c1h1r5bb01d gjm1555c1h1r5cb01d gjm1555c1h1r6wb01d gjm1555c1h1r6bb01d gjm1555c1h1r6cb01d gjm1555c1h1r7wb01d gjm1555c1h1r7bb01d gjm1555c1h1r7cb01d gjm1555c1h1r8wb01d gjm1555c1h1r8bb01d gjm1555c1h1r8cb01d gjm1555c1h1r9wb01d gjm1555c1h1r9bb01d gjm1555c1h1r9cb01d 0.6x0.3( 03 )<0201> 1.0x0.5( 15 )<0402> 0.1pf( r10 ) 0.2pf( r20 ) 0.3pf( r30 ) 0.4pf( r40 ) 0.5pf( r50 ) 0.6pf( r60 ) 0.7pf( r70 ) 0.8pf( r80 ) 0.9pf( r90 ) 1.0pf( 1r0 ) 1.1pf( 1r1 ) 1.2pf( 1r2 ) 1.3pf( 1r3 ) 1.4pf( 1r4 ) 1.5pf( 1r5 ) 1.6pf( 1r6 ) 1.7pf( 1r7 ) 1.8pf( 1r8 ) 1.9pf( 1r9 ) 0.05pf( w ) 0.1pf( b ) 0.05pf( w ) 0.1pf( b ) 0.05pf( w ) 0.1pf( b ) 0.05pf( w ) 0.1pf( b ) 0.05pf( w ) 0.1pf( b ) 0.05pf( w ) 0.1pf( b ) 0.05pf( w ) 0.1pf( b ) 0.05pf( w ) 0.1pf( b ) 0.05pf( w ) 0.1pf( b ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) temperature compensating type c0g(5c) characteristics gj m 03 3 5c 1e r20 w b01 d packaging code in part number shows std 180mm reel taping. q product id w series e dimensions (lxw) r dimension (t) t temperature characteristics y rated voltage u capacitance i capacitance tolerance o individual specification code !0 packaging (part number) w q e r t y u i o !0 for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
90 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. the part number code is shown in ( ) and unit is shown in [ ]. < >: eia [inch] code lxw [mm] rated volt. [vdc] capacitance tolerance part number 25( 1e ) gjm0335c1e2r1wb01d gjm0335c1e2r1bb01d gjm0335c1e2r1cb01d gjm0335c1e2r2wb01d gjm0335c1e2r2bb01d gjm0335c1e2r2cb01d gjm0335c1e2r3wb01d gjm0335c1e2r3bb01d gjm0335c1e2r3cb01d gjm0335c1e2r4wb01d gjm0335c1e2r4bb01d gjm0335c1e2r4cb01d gjm0335c1e2r5wb01d gjm0335c1e2r5bb01d gjm0335c1e2r5cb01d gjm0335c1e2r6wb01d gjm0335c1e2r6bb01d gjm0335c1e2r6cb01d gjm0335c1e2r7wb01d gjm0335c1e2r7bb01d gjm0335c1e2r7cb01d gjm0335c1e2r8wb01d gjm0335c1e2r8bb01d gjm0335c1e2r8cb01d gjm0335c1e2r9wb01d gjm0335c1e2r9bb01d gjm0335c1e2r9cb01d gjm0335c1e3r0wb01d gjm0335c1e3r0bb01d gjm0335c1e3r0cb01d gjm0335c1e3r1wb01d gjm0335c1e3r1bb01d gjm0335c1e3r1cb01d gjm0335c1e3r2wb01d gjm0335c1e3r2bb01d gjm0335c1e3r2cb01d gjm0335c1e3r3wb01d gjm0335c1e3r3bb01d gjm0335c1e3r3cb01d gjm0335c1e3r4wb01d gjm0335c1e3r4bb01d gjm0335c1e3r4cb01d gjm0335c1e3r5wb01d gjm0335c1e3r5bb01d gjm0335c1e3r5cb01d 50( 1h ) gjm1555c1h2r1wb01d gjm1555c1h2r1bb01d gjm1555c1h2r1cb01d gjm1555c1h2r2wb01d gjm1555c1h2r2bb01d gjm1555c1h2r2cb01d gjm1555c1h2r3wb01d gjm1555c1h2r3bb01d gjm1555c1h2r3cb01d gjm1555c1h2r4wb01d gjm1555c1h2r4bb01d gjm1555c1h2r4cb01d gjm1555c1h2r5wb01d gjm1555c1h2r5bb01d gjm1555c1h2r5cb01d gjm1555c1h2r6wb01d gjm1555c1h2r6bb01d gjm1555c1h2r6cb01d gjm1555c1h2r7wb01d gjm1555c1h2r7bb01d gjm1555c1h2r7cb01d gjm1555c1h2r8wb01d gjm1555c1h2r8bb01d gjm1555c1h2r8cb01d gjm1555c1h2r9wb01d gjm1555c1h2r9bb01d gjm1555c1h2r9cb01d gjm1555c1h3r0wb01d gjm1555c1h3r0bb01d gjm1555c1h3r0cb01d gjm1555c1h3r1wb01d gjm1555c1h3r1bb01d gjm1555c1h3r1cb01d gjm1555c1h3r2wb01d gjm1555c1h3r2bb01d gjm1555c1h3r2cb01d gjm1555c1h3r3wb01d gjm1555c1h3r3bb01d gjm1555c1h3r3cb01d gjm1555c1h3r4wb01d gjm1555c1h3r4bb01d gjm1555c1h3r4cb01d gjm1555c1h3r5wb01d gjm1555c1h3r5bb01d gjm1555c1h3r5cb01d 0.6x0.3( 03 )<0201> 1.0x0.5( 15 )<0402> 2.1pf( 2r1 ) 2.2pf( 2r2 ) 2.3pf( 2r3 ) 2.4pf( 2r4 ) 2.5pf( 2r5 ) 2.6pf( 2r6 ) 2.7pf( 2r7 ) 2.8pf( 2r8 ) 2.9pf( 2r9 ) 3.0pf( 3r0 ) 3.1pf( 3r1 ) 3.2pf( 3r2 ) 3.3pf( 3r3 ) 3.4pf( 3r4 ) 3.5pf( 3r5 ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) temperature compensating type c0g(5c) characteristics gjm0335c1e2r0wb01d gjm0335c1e2r0bb01d gjm0335c1e2r0cb01d gjm1555c1h2r0wb01d gjm1555c1h2r0bb01d gjm1555c1h2r0cb01d 2.0pf( 2r0 ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) gj m 03 3 5c 1e 2r0 w b01 d packaging code in part number shows std 180mm reel taping. q product id w series e dimensions (lxw) r dimension (t) t temperature characteristics y rated voltage u capacitance i capacitance tolerance o individual specification code !0 packaging (part number) w q e r t y u i o !0 for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
91 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. the part number code is shown in ( ) and unit is shown in [ ]. < >: eia [inch] code lxw [mm] rated volt. [vdc] capacitance tolerance part number 25( 1e ) gjm0335c1e3r7wb01d gjm0335c1e3r7bb01d gjm0335c1e3r7cb01d gjm0335c1e3r8wb01d gjm0335c1e3r8bb01d gjm0335c1e3r8cb01d gjm0335c1e3r9wb01d gjm0335c1e3r9bb01d gjm0335c1e3r9cb01d gjm0335c1e4r0wb01d gjm0335c1e4r0bb01d gjm0335c1e4r0cb01d gjm0335c1e4r1wb01d gjm0335c1e4r1bb01d gjm0335c1e4r1cb01d gjm0335c1e4r2wb01d gjm0335c1e4r2bb01d gjm0335c1e4r2cb01d gjm0335c1e4r3wb01d gjm0335c1e4r3bb01d gjm0335c1e4r3cb01d gjm0335c1e4r4wb01d gjm0335c1e4r4bb01d gjm0335c1e4r4cb01d gjm0335c1e4r5wb01d gjm0335c1e4r5bb01d gjm0335c1e4r5cb01d gjm0335c1e4r6wb01d gjm0335c1e4r6bb01d gjm0335c1e4r6cb01d gjm0335c1e4r7wb01d gjm0335c1e4r7bb01d gjm0335c1e4r7cb01d gjm0335c1e4r8wb01d gjm0335c1e4r8bb01d gjm0335c1e4r8cb01d gjm0335c1e4r9wb01d gjm0335c1e4r9bb01d gjm0335c1e4r9cb01d gjm0335c1e5r0wb01d gjm0335c1e5r0bb01d gjm0335c1e5r0cb01d gjm0335c1e5r1wb01d gjm0335c1e5r1bb01d gjm0335c1e5r1cb01d gjm0335c1e5r1db01d 50( 1h ) gjm1555c1h3r7wb01d gjm1555c1h3r7bb01d gjm1555c1h3r7cb01d gjm1555c1h3r8wb01d gjm1555c1h3r8bb01d gjm1555c1h3r8cb01d gjm1555c1h3r9wb01d gjm1555c1h3r9bb01d gjm1555c1h3r9cb01d gjm1555c1h4r0wb01d gjm1555c1h4r0bb01d gjm1555c1h4r0cb01d gjm1555c1h4r1wb01d gjm1555c1h4r1bb01d gjm1555c1h4r1cb01d gjm1555c1h4r2wb01d gjm1555c1h4r2bb01d gjm1555c1h4r2cb01d gjm1555c1h4r3wb01d gjm1555c1h4r3bb01d gjm1555c1h4r3cb01d gjm1555c1h4r4wb01d gjm1555c1h4r4bb01d gjm1555c1h4r4cb01d gjm1555c1h4r5wb01d gjm1555c1h4r5bb01d gjm1555c1h4r5cb01d gjm1555c1h4r6wb01d gjm1555c1h4r6bb01d gjm1555c1h4r6cb01d gjm1555c1h4r7wb01d gjm1555c1h4r7bb01d gjm1555c1h4r7cb01d gjm1555c1h4r8wb01d gjm1555c1h4r8bb01d gjm1555c1h4r8cb01d gjm1555c1h4r9wb01d gjm1555c1h4r9bb01d gjm1555c1h4r9cb01d gjm1555c1h5r0wb01d gjm1555c1h5r0bb01d gjm1555c1h5r0cb01d gjm1555c1h5r1wb01d gjm1555c1h5r1bb01d gjm1555c1h5r1cb01d gjm1555c1h5r1db01d 0.6x0.3( 03 )<0201> 1.0x0.5( 15 )<0402> 3.7pf( 3r7 ) 3.8pf( 3r8 ) 3.9pf( 3r9 ) 4.0pf( 4r0 ) 4.1pf( 4r1 ) 4.2pf( 4r2 ) 4.3pf( 4r3 ) 4.4pf( 4r4 ) 4.5pf( 4r5 ) 4.6pf( 4r6 ) 4.7pf( 4r7 ) 4.8pf( 4r8 ) 4.9pf( 4r9 ) 5.0pf( 5r0 ) 5.1pf( 5r1 ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.5pf( d ) temperature compensating type c0g(5c) characteristics gjm0335c1e3r6wb01d gjm0335c1e3r6bb01d gjm0335c1e3r6cb01d gjm1555c1h3r6wb01d gjm1555c1h3r6bb01d gjm1555c1h3r6cb01d 3.6pf( 3r6 ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
92 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. the part number code is shown in ( ) and unit is shown in [ ]. < >: eia [inch] code lxw [mm] rated volt. [vdc] capacitance tolerance part number 25( 1e ) gjm0335c1e5r3wb01d gjm0335c1e5r3bb01d gjm0335c1e5r3cb01d gjm0335c1e5r3db01d gjm0335c1e5r4wb01d gjm0335c1e5r4bb01d gjm0335c1e5r4cb01d gjm0335c1e5r4db01d gjm0335c1e5r5wb01d gjm0335c1e5r5bb01d gjm0335c1e5r5cb01d gjm0335c1e5r5db01d gjm0335c1e5r6wb01d gjm0335c1e5r6bb01d gjm0335c1e5r6cb01d gjm0335c1e5r6db01d gjm0335c1e5r7wb01d gjm0335c1e5r7bb01d gjm0335c1e5r7cb01d gjm0335c1e5r7db01d gjm0335c1e5r8wb01d gjm0335c1e5r8bb01d gjm0335c1e5r8cb01d gjm0335c1e5r8db01d gjm0335c1e5r9wb01d gjm0335c1e5r9bb01d gjm0335c1e5r9cb01d gjm0335c1e5r9db01d gjm0335c1e6r0wb01d gjm0335c1e6r0bb01d gjm0335c1e6r0cb01d gjm0335c1e6r0db01d gjm0335c1e6r1wb01d gjm0335c1e6r1bb01d gjm0335c1e6r1cb01d gjm0335c1e6r1db01d gjm0335c1e6r2wb01d gjm0335c1e6r2bb01d gjm0335c1e6r2cb01d gjm0335c1e6r2db01d gjm0335c1e6r3wb01d gjm0335c1e6r3bb01d gjm0335c1e6r3cb01d gjm0335c1e6r3db01d 50( 1h ) gjm1555c1h5r3wb01d gjm1555c1h5r3bb01d gjm1555c1h5r3cb01d gjm1555c1h5r3db01d gjm1555c1h5r4wb01d gjm1555c1h5r4bb01d gjm1555c1h5r4cb01d gjm1555c1h5r4db01d gjm1555c1h5r5wb01d gjm1555c1h5r5bb01d gjm1555c1h5r5cb01d gjm1555c1h5r5db01d gjm1555c1h5r6wb01d gjm1555c1h5r6bb01d gjm1555c1h5r6cb01d gjm1555c1h5r6db01d gjm1555c1h5r7wb01d gjm1555c1h5r7bb01d gjm1555c1h5r7cb01d gjm1555c1h5r7db01d gjm1555c1h5r8wb01d gjm1555c1h5r8bb01d gjm1555c1h5r8cb01d gjm1555c1h5r8db01d gjm1555c1h5r9wb01d gjm1555c1h5r9bb01d gjm1555c1h5r9cb01d gjm1555c1h5r9db01d gjm1555c1h6r0wb01d gjm1555c1h6r0bb01d gjm1555c1h6r0cb01d gjm1555c1h6r0db01d gjm1555c1h6r1wb01d gjm1555c1h6r1bb01d gjm1555c1h6r1cb01d gjm1555c1h6r1db01d gjm1555c1h6r2wb01d gjm1555c1h6r2bb01d gjm1555c1h6r2cb01d gjm1555c1h6r2db01d gjm1555c1h6r3wb01d gjm1555c1h6r3bb01d gjm1555c1h6r3cb01d gjm1555c1h6r3db01d 0.6x0.3( 03 )<0201> 1.0x0.5( 15 )<0402> 5.3pf( 5r3 ) 5.4pf( 5r4 ) 5.5pf( 5r5 ) 5.6pf( 5r6 ) 5.7pf( 5r7 ) 5.8pf( 5r8 ) 5.9pf( 5r9 ) 6.0pf( 6r0 ) 6.1pf( 6r1 ) 6.2pf( 6r2 ) 6.3pf( 6r3 ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.5pf( d ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.5pf( d ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.5pf( d ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.5pf( d ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.5pf( d ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.5pf( d ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.5pf( d ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.5pf( d ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.5pf( d ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.5pf( d ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.5pf( d ) temperature compensating type c0g(5c) characteristics gjm0335c1e5r2wb01d gjm0335c1e5r2bb01d gjm0335c1e5r2cb01d gjm0335c1e5r2db01d gjm1555c1h5r2wb01d gjm1555c1h5r2bb01d gjm1555c1h5r2cb01d gjm1555c1h5r2db01d 5.2pf( 5r2 ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.5pf( d ) gj m 03 3 5c 1e 5r2 w b01 d packaging code in part number shows std 180mm reel taping. q product id w series e dimensions (lxw) r dimension (t) t temperature characteristics y rated voltage u capacitance i capacitance tolerance o individual specification code !0 packaging (part number) w q e r t y u i o !0 for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
93 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. the part number code is shown in ( ) and unit is shown in [ ]. < >: eia [inch] code lxw [mm] rated volt. [vdc] capacitance tolerance part number 25( 1e ) gjm0335c1e6r5wb01d gjm0335c1e6r5bb01d gjm0335c1e6r5cb01d gjm0335c1e6r5db01d gjm0335c1e6r6wb01d gjm0335c1e6r6bb01d gjm0335c1e6r6cb01d gjm0335c1e6r6db01d gjm0335c1e6r7wb01d gjm0335c1e6r7bb01d gjm0335c1e6r7cb01d gjm0335c1e6r7db01d gjm0335c1e6r8wb01d gjm0335c1e6r8bb01d gjm0335c1e6r8cb01d gjm0335c1e6r8db01d gjm0336c1e6r9wb01d gjm0336c1e6r9bb01d gjm0336c1e6r9cb01d gjm0336c1e6r9db01d gjm0336c1e7r0wb01d gjm0336c1e7r0bb01d gjm0336c1e7r0cb01d gjm0336c1e7r0db01d gjm0336c1e7r1wb01d gjm0336c1e7r1bb01d gjm0336c1e7r1cb01d gjm0336c1e7r1db01d gjm0336c1e7r2wb01d gjm0336c1e7r2bb01d gjm0336c1e7r2cb01d gjm0336c1e7r2db01d gjm0336c1e7r3wb01d gjm0336c1e7r3bb01d gjm0336c1e7r3cb01d gjm0336c1e7r3db01d gjm0336c1e7r4wb01d gjm0336c1e7r4bb01d gjm0336c1e7r4cb01d gjm0336c1e7r4db01d gjm0336c1e7r5wb01d gjm0336c1e7r5bb01d gjm0336c1e7r5cb01d gjm0336c1e7r5db01d gjm0336c1e7r6wb01d gjm0336c1e7r6bb01d gjm0336c1e7r6cb01d gjm0336c1e7r6db01d 50( 1h ) gjm1555c1h6r5wb01d gjm1555c1h6r5bb01d gjm1555c1h6r5cb01d gjm1555c1h6r5db01d gjm1555c1h6r6wb01d gjm1555c1h6r6bb01d gjm1555c1h6r6cb01d gjm1555c1h6r6db01d gjm1555c1h6r7wb01d gjm1555c1h6r7bb01d gjm1555c1h6r7cb01d gjm1555c1h6r7db01d gjm1555c1h6r8wb01d gjm1555c1h6r8bb01d gjm1555c1h6r8cb01d gjm1555c1h6r8db01d gjm1555c1h6r9wb01d gjm1555c1h6r9bb01d gjm1555c1h6r9cb01d gjm1555c1h6r9db01d gjm1555c1h7r0wb01d gjm1555c1h7r0bb01d gjm1555c1h7r0cb01d gjm1555c1h7r0db01d gjm1555c1h7r1wb01d gjm1555c1h7r1bb01d gjm1555c1h7r1cb01d gjm1555c1h7r1db01d gjm1555c1h7r2wb01d gjm1555c1h7r2bb01d gjm1555c1h7r2cb01d gjm1555c1h7r2db01d gjm1555c1h7r3wb01d gjm1555c1h7r3bb01d gjm1555c1h7r3cb01d gjm1555c1h7r3db01d gjm1555c1h7r4wb01d gjm1555c1h7r4bb01d gjm1555c1h7r4cb01d gjm1555c1h7r4db01d gjm1555c1h7r5wb01d gjm1555c1h7r5bb01d gjm1555c1h7r5cb01d gjm1555c1h7r5db01d gjm1555c1h7r6wb01d gjm1555c1h7r6bb01d gjm1555c1h7r6cb01d gjm1555c1h7r6db01d 0.6x0.3( 03 )<0201> 1.0x0.5( 15 )<0402> 6.5pf( 6r5 ) 6.6pf( 6r6 ) 6.7pf( 6r7 ) 6.8pf( 6r8 ) 6.9pf( 6r9 ) 7.0pf( 7r0 ) 7.1pf( 7r1 ) 7.2pf( 7r2 ) 7.3pf( 7r3 ) 7.4pf( 7r4 ) 7.5pf( 7r5 ) 7.6pf( 7r6 ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.5pf( d ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.5pf( d ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.5pf( d ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.5pf( d ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.5pf( d ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.5pf( d ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.5pf( d ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.5pf( d ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.5pf( d ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.5pf( d ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.5pf( d ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.5pf( d ) temperature compensating type c0g(5c)/c0h(6c) characteristics gjm0335c1e6r4wb01d gjm0335c1e6r4bb01d gjm0335c1e6r4cb01d gjm0335c1e6r4db01d gjm1555c1h6r4wb01d gjm1555c1h6r4bb01d gjm1555c1h6r4cb01d gjm1555c1h6r4db01d 6.4pf( 6r4 ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.5pf( d ) for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
94 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. the part number code is shown in ( ) and unit is shown in [ ]. < >: eia [inch] code lxw [mm] rated volt. [vdc] capacitance tolerance part number 25( 1e ) gjm0336c1e7r8wb01d gjm0336c1e7r8bb01d gjm0336c1e7r8cb01d gjm0336c1e7r8db01d gjm0336c1e7r9wb01d gjm0336c1e7r9bb01d gjm0336c1e7r9cb01d gjm0336c1e7r9db01d gjm0336c1e8r0wb01d gjm0336c1e8r0bb01d gjm0336c1e8r0cb01d gjm0336c1e8r0db01d gjm0336c1e8r1wb01d gjm0336c1e8r1bb01d gjm0336c1e8r1cb01d gjm0336c1e8r1db01d gjm0336c1e8r2wb01d gjm0336c1e8r2bb01d gjm0336c1e8r2cb01d gjm0336c1e8r2db01d gjm0336c1e8r3wb01d gjm0336c1e8r3bb01d gjm0336c1e8r3cb01d gjm0336c1e8r3db01d gjm0336c1e8r4wb01d gjm0336c1e8r4bb01d gjm0336c1e8r4cb01d gjm0336c1e8r4db01d gjm0336c1e8r5wb01d gjm0336c1e8r5bb01d gjm0336c1e8r5cb01d gjm0336c1e8r5db01d gjm0336c1e8r6wb01d gjm0336c1e8r6bb01d gjm0336c1e8r6cb01d gjm0336c1e8r6db01d gjm0336c1e8r7wb01d gjm0336c1e8r7bb01d gjm0336c1e8r7cb01d gjm0336c1e8r7db01d gjm0336c1e8r8wb01d gjm0336c1e8r8bb01d gjm0336c1e8r8cb01d gjm0336c1e8r8db01d 50( 1h ) gjm1555c1h7r8wb01d gjm1555c1h7r8bb01d gjm1555c1h7r8cb01d gjm1555c1h7r8db01d gjm1555c1h7r9wb01d gjm1555c1h7r9bb01d gjm1555c1h7r9cb01d gjm1555c1h7r9db01d gjm1555c1h8r0wb01d gjm1555c1h8r0bb01d gjm1555c1h8r0cb01d gjm1555c1h8r0db01d gjm1555c1h8r1wb01d gjm1555c1h8r1bb01d gjm1555c1h8r1cb01d gjm1555c1h8r1db01d gjm1555c1h8r2wb01d gjm1555c1h8r2bb01d gjm1555c1h8r2cb01d gjm1555c1h8r2db01d gjm1555c1h8r3wb01d gjm1555c1h8r3bb01d gjm1555c1h8r3cb01d gjm1555c1h8r3db01d gjm1555c1h8r4wb01d gjm1555c1h8r4bb01d gjm1555c1h8r4cb01d gjm1555c1h8r4db01d gjm1555c1h8r5wb01d gjm1555c1h8r5bb01d gjm1555c1h8r5cb01d gjm1555c1h8r5db01d gjm1555c1h8r6wb01d gjm1555c1h8r6bb01d gjm1555c1h8r6cb01d gjm1555c1h8r6db01d gjm1555c1h8r7wb01d gjm1555c1h8r7bb01d gjm1555c1h8r7cb01d gjm1555c1h8r7db01d gjm1555c1h8r8wb01d gjm1555c1h8r8bb01d gjm1555c1h8r8cb01d gjm1555c1h8r8db01d 0.6x0.3( 03 )<0201> 1.0x0.5( 15 )<0402> 7.8pf( 7r8 ) 7.9pf( 7r9 ) 8.0pf( 8r0 ) 8.1pf( 8r1 ) 8.2pf( 8r2 ) 8.3pf( 8r3 ) 8.4pf( 8r4 ) 8.5pf( 8r5 ) 8.6pf( 8r6 ) 8.7pf( 8r7 ) 8.8pf( 8r8 ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.5pf( d ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.5pf( d ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.5pf( d ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.5pf( d ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.5pf( d ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.5pf( d ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.5pf( d ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.5pf( d ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.5pf( d ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.5pf( d ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.5pf( d ) temperature compensating type c0g(5c)/c0h(6c) characteristics gjm0336c1e7r7wb01d gjm0336c1e7r7bb01d gjm0336c1e7r7cb01d gjm0336c1e7r7db01d gjm1555c1h7r7wb01d gjm1555c1h7r7bb01d gjm1555c1h7r7cb01d gjm1555c1h7r7db01d 7.7pf( 7r7 ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.5pf( d ) gj m 03 3 6c 1e 7r7 w b01 d packaging code in part number shows std 180mm reel taping. q product id w series e dimensions (lxw) r dimension (t) t temperature characteristics y rated voltage u capacitance i capacitance tolerance o individual specification code !0 packaging (part number) w q e r t y u i o !0 for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
95 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. the part number code is shown in ( ) and unit is shown in [ ]. < >: eia [inch] code lxw [mm] rated volt. [vdc] capacitance tolerance part number 25( 1e ) gjm0336c1e9r0wb01d gjm0336c1e9r0bb01d gjm0336c1e9r0cb01d gjm0336c1e9r0db01d gjm0336c1e9r1wb01d gjm0336c1e9r1bb01d gjm0336c1e9r1cb01d gjm0336c1e9r1db01d gjm0336c1e9r2wb01d gjm0336c1e9r2bb01d gjm0336c1e9r2cb01d gjm0336c1e9r2db01d gjm0336c1e9r3wb01d gjm0336c1e9r3bb01d gjm0336c1e9r3cb01d gjm0336c1e9r3db01d gjm0336c1e9r4wb01d gjm0336c1e9r4bb01d gjm0336c1e9r4cb01d gjm0336c1e9r4db01d gjm0336c1e9r5wb01d gjm0336c1e9r5bb01d gjm0336c1e9r5cb01d gjm0336c1e9r5db01d gjm0336c1e9r6wb01d gjm0336c1e9r6bb01d gjm0336c1e9r6cb01d gjm0336c1e9r6db01d gjm0336c1e9r7wb01d gjm0336c1e9r7bb01d gjm0336c1e9r7cb01d gjm0336c1e9r7db01d gjm0336c1e9r8wb01d gjm0336c1e9r8bb01d gjm0336c1e9r8cb01d gjm0336c1e9r8db01d gjm0336c1e9r9wb01d gjm0336c1e9r9bb01d gjm0336c1e9r9cb01d gjm0336c1e9r9db01d 50( 1h ) gjm1555c1h9r0wb01d gjm1555c1h9r0bb01d gjm1555c1h9r0cb01d gjm1555c1h9r0db01d gjm1555c1h9r1wb01d gjm1555c1h9r1bb01d gjm1555c1h9r1cb01d gjm1555c1h9r1db01d gjm1555c1h9r2wb01d gjm1555c1h9r2bb01d gjm1555c1h9r2cb01d gjm1555c1h9r2db01d gjm1555c1h9r3wb01d gjm1555c1h9r3bb01d gjm1555c1h9r3cb01d gjm1555c1h9r3db01d gjm1555c1h9r4wb01d gjm1555c1h9r4bb01d gjm1555c1h9r4cb01d gjm1555c1h9r4db01d gjm1555c1h9r5wb01d gjm1555c1h9r5bb01d gjm1555c1h9r5cb01d gjm1555c1h9r5db01d gjm1555c1h9r6wb01d gjm1555c1h9r6bb01d gjm1555c1h9r6cb01d gjm1555c1h9r6db01d gjm1555c1h9r7wb01d gjm1555c1h9r7bb01d gjm1555c1h9r7cb01d gjm1555c1h9r7db01d gjm1555c1h9r8wb01d gjm1555c1h9r8bb01d gjm1555c1h9r8cb01d gjm1555c1h9r8db01d gjm1555c1h9r9wb01d gjm1555c1h9r9bb01d gjm1555c1h9r9cb01d gjm1555c1h9r9db01d 1.0x0.5( 15 )<0402> 0.6x0.3( 03 )<0201> 9.0pf( 9r0 ) 9.1pf( 9r1 ) 9.2pf( 9r2 ) 9.3pf( 9r3 ) 9.4pf( 9r4 ) 9.5pf( 9r5 ) 9.6pf( 9r6 ) 9.7pf( 9r7 ) 9.8pf( 9r8 ) 9.9pf( 9r9 ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.5pf( d ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.5pf( d ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.5pf( d ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.5pf( d ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.5pf( d ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.5pf( d ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.5pf( d ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.5pf( d ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.5pf( d ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.5pf( d ) temperature compensating type c0g(5c)/c0h(6c) characteristics gjm0336c1e8r9wb01d gjm0336c1e8r9bb01d gjm0336c1e8r9cb01d gjm0336c1e8r9db01d gjm1555c1h8r9wb01d gjm1555c1h8r9bb01d gjm1555c1h8r9cb01d gjm1555c1h8r9db01d 8.9pf( 8r9 ) 0.05pf( w ) 0.1pf( b ) 0.25pf( c ) 0.5pf( d ) for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
96 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. the part number code is shown in ( ) and unit is shown in [ ]. < >: eia [inch] code lxw [mm] rated volt. [vdc] capacitance tolerance part number 25( 1e ) gjm0336c1e100gb01d gjm0336c1e100jb01d gjm0336c1e110gb01d gjm0336c1e110jb01d gjm0336c1e120gb01d gjm0336c1e120jb01d gjm0336c1e130gb01d gjm0336c1e130jb01d gjm0336c1e150gb01d gjm0336c1e150jb01d gjm0336c1e160gb01d gjm0336c1e160jb01d gjm0336c1e180gb01d gjm0336c1e180jb01d gjm0336c1e200gb01d gjm0336c1e200jb01d 6.3( 0j ) gjm0335c0j220gb01d gjm0335c0j220jb01d gjm0335c0j240gb01d gjm0335c0j240jb01d gjm0335c0j270gb01d gjm0335c0j270jb01d gjm0335c0j300gb01d gjm0335c0j300jb01d gjm0335c0j330gb01d gjm0335c0j330jb01d 50( 1h ) gjm1555c1h100gb01d gjm1555c1h100jb01d gjm1555c1h110gb01d gjm1555c1h110jb01d gjm1555c1h120gb01d gjm1555c1h120jb01d gjm1555c1h130gb01d gjm1555c1h130jb01d gjm1555c1h150gb01d gjm1555c1h150jb01d gjm1555c1h160gb01d gjm1555c1h160jb01d gjm1555c1h180gb01d gjm1555c1h180jb01d gjm1555c1h200gb01d gjm1555c1h200jb01d 0.6x0.3( 03 )<0201> 1.0x0.5( 15 )<0402> 10pf( 100 ) 11pf( 110 ) 12pf( 120 ) 13pf( 130 ) 15pf( 150 ) 16pf( 160 ) 18pf( 180 ) 20pf( 200 ) 22pf( 220 ) 24pf( 240 ) 27pf( 270 ) 30pf( 300 ) 33pf( 330 ) 2%( g ) 5%( j ) 2%( g ) 5%( j ) 2%( g ) 5%( j ) 2%( g ) 5%( j ) 2%( g ) 5%( j ) 2%( g ) 5%( j ) 2%( g ) 5%( j ) 2%( g ) 5%( j ) 2%( g ) 5%( j ) 2%( g ) 5%( j ) 2%( g ) 5%( j ) 2%( g ) 5%( j ) 2%( g ) 5%( j ) temperature compensating type c0g(5c)/c0h(6c) characteristics gj m 03 3 6c 1e 100 g b01 d packaging code in part number shows std 180mm reel taping. q product id w series e dimensions (lxw) r dimension (t) t temperature characteristics y rated voltage u capacitance i capacitance tolerance o individual specification code !0 packaging (part number) w q e r t y u i o !0 for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
gjm series specifications and test methods (1) ! note 1. this specifications and test methods is downloaded from the website of murata manufacturing co.,ltd. therefore, it's specifi cations are subject to change or our products in it may be discontinued without advance notice. 0. please check with our sales representatives or product engineers before ordering. 2. this specifications and test methods has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product 0. specifications before ordering. see the previous pages. within the specified dimensions no defects or abnormalities 10,000m min. or 500 f min. (whichever is smaller) no defects or abnormalities y 55 to w 125 d operating temperature range rated voltage appearance dimensions dielectric strength insulation resistance (i.r.) 1 2 3 4 5 6 using calipers the insulation resistance should be measured with a dc voltage not exceeding the rated voltage at 25 d and 75%rh max. and within 2 minutes of charging. no failure should be observed when 300% of the rated voltage is applied between the terminations for 1 to 5 seconds, provided the charge/discharge current is less than 50ma. visual inspection the rated voltage is defined as the maximum voltage that may be applied continuously to the capacitor. when ac voltage is superimposed on dc voltage, v p-p or v o-p , whichever is larger, should be maintained within the rated voltage range. reference temperature: 25 d (2c, 3c, 4c: 20 d ) 30pf and over: q u 1000 30pf and below: q u 400 w 20c c: nominal capacitance (pf) within the specified tolerance capacitance q 7 8 the capacitance/q should be measured at 25 d at the frequency and voltage shown in the table. continued on the following page. no removal of the terminations or other defect should occur. adhesive strength of termination 10 solder the capacitor to the test jig (glass epoxy board) shown in fig. 1 using a eutectic solder. then apply a 5n* force in parallel with the test jig for 10 t 1 sec. the soldering should be done either with an iron or using the reflow method and should be conducted with care so that the soldering is uniform and free of defects such as heat shock. *2n (gjm03) a b c baked electrode or copper foil solder resist frequency 1 t 0.1mhz voltage 0.5 to 5vrms within the specified tolerance (table a) within t 0.2% or t 0.05pf (whichever is larger.) temperature coefficient capacitance drift capacitance temperature characteristics 9 the capacitance change should be measured after 5 min. at each specified temperature stage. temperature compensating type the temperature coefficient is determined using the capacitance measured in step 3 as a reference. when cycling the temperature sequentially from step 1 through 5, (5c: w 25 to 125 d : other temp. coeffs.: w 20 to 125 d ) the capacitance should be within the specified tolerance for the temperature coefficient and capacitance change as in table a. the capacitance drift is calculated by dividing the differences between the maximum and minimum measured values in steps 1, 3 and 5 by the capacitance value in step 3. step 1 2 3 4 5 reference temp. t 2 y 55 t 3 reference temp. t 2 125 t 3 reference temp. t 2 temperature ( d ) (in mm) fig. 1 type a b c gjm03 gjm15 0.3 0.4 0.9 1.5 0.3 0.5 no. item specifications test method temperature compensating type gjm series specifications and test methods 97 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
! note 1. this specifications and test methods is downloaded from the website of murata manufacturing co.,ltd. therefore, it's specifi cations are subject to change or our products in it may be discontinued without advance notice. 0. please check with our sales representatives or product engineers before ordering. 2. this specifications and test methods has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product 0. specifications before ordering. gjm series specifications and test methods (1) continued from the preceding page. continued on the following page. (in mm) fig. 2 type a b c gjm03 gjm15 0.3 0.4 0.9 1.5 0.3 0.5 75% of the terminations are to be soldered evenly and continuously. solderability of termination 13 immerse the capacitor in a solution of ethanol (jis-k-8101) and rosin (jis-k-5902) (25% rosin in weight proportion). preheat at 80 to 120 d for 10 to 30 seconds. after preheating, immerse in eutectic solder solution for 2 t 0.5 seconds at 230 t 5 d or sn-3.0ag-0.5cu solder solution for 20.5 seconds at 2455c. more than 10,000m or 500 f (whichever is smaller) within t 2.5% or t 0.25pf (whichever is larger) 30pf and over: q u 1000 30pf and below: q u 400 w 20c c: nominal capacitance (pf) appearance i.r. capacitance change q no marking defects the measured and observed characteristics should satisfy the specifications in the following table. resistance to soldering heat 14 preheat the capacitor at 120 to 150 d for 1 minute. immerse the capacitor in a eutectic solder or sn-3.0ag-0.5cu solder solution at 270 t 5 d for 10 t 0.5 seconds. let sit at room temperature for 24 t 2 hours. no failure dielectric strength more than 10,000m or 500 f (whichever is smaller) within t 2.5% or t 0.25pf (whichever is larger) 30pf and over: q u 1000 30pf and below: q u 400 w 20c c: nominal capacitance (pf) appearance i.r. capacitance change q no marking defects the measured and observed characteristics should satisfy the specifications in the following table. temperature cycle 15 fix the capacitor to the supporting jig in the same manner and under the same conditions as (10). perform the five cycles according to the four heat treatments listed in the following table. let sit for 24 t 2 hours at room temperature, then measure. no failure dielectric strength more than 10,000m or 500 f (whichever is smaller) within t 5% or t 0.5pf (whichever is larger) 30pf and below: q u 350 10pf and over, 30pf and below: q u 275 w c 10pf and below: q u 200 w 10c c: nominal capacitance (pf) 5 2 appearance i.r. capacitance change q no marking defects the measured and observed characteristics should satisfy the specifications in the following table. humidity, steady state 16 let the capacitor sit at 40 t 2 d and 90 to 95% humidity for 500 t 12 hours. remove and let sit for 24 t 2 hours (temperature compensating type) at room temperature, then measure. 30pf and over: q u 1000 30pf and below: q u 400 w 20c c: nominal capacitance (pf) no defects or abnormalities within the specified tolerance vibration resistance 11 solder the capacitor to the test jig (glass epoxy board) in the same manner and under the same conditions as (10). the capacitor should be subjected to a simple harmonic motion having a total amplitude of 1.5mm, the frequency being varied uniformly between the approximate limits of 10 and 55hz. the frequency range, from 10 to 55hz and return to 10hz, should be traversed in approximately 1 minute. this motion should be applied for a period of 2 hours in each of 3 mutually perpendicular directions (total of 6 hours). appearance capacitance q deflection 12 solder the capacitor to the test jig (glass epoxy boards) shown in fig. 2 using a eutectic solder. then apply a force in the direction shown in fig. 3. the soldering should be done by the reflow method and should be conducted with care so that the soldering is uniform and free of defects such as heat shock . y z ^ a ?
v z [ ? ? b
tu w xy z [ \] _ ` | ?a ? ? -? q r s u v w z ] ^ | ? ? tu x | ? q tu | a u | u y | a c
v w z [ ? ? y ] ^ a ? 100 z ] ^ ? ? s t w 40 f 4.5 capacitance meter flexure : v 1 20 50 r230 pressurizing speed: 1.0mm/sec. pressurize 45 45 fig. 3 t: 0.8mm step 1234 temp. ( d ) time (min.) min. operating temp. w 0/ y 3 room temp. max. operating temp. w 3/ y 0 room temp. 30 t 3 2 to 3 30 t 3 2 to 3 no. item specifications test method temperature compensating type (in mm) within t 5% or t 0.5pf (whichever is larger) capacitance change no marking defects appearance gjm series specifications and test methods 98 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
! note 1. this specifications and test methods is downloaded from the website of murata manufacturing co.,ltd. therefore, it's specifi cations are subject to change or our products in it may be discontinued without advance notice. 0. please check with our sales representatives or product engineers before ordering. 2. this specifications and test methods has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product 0. specifications before ordering. gjm series specifications and test methods (1) continued from the preceding page. * 1: nominal values denote the temperature coefficient within a range of 25 to 125 d . * 2: nominal values denote the temperature coefficient within a range of 20 to 125 d . (2) 5c 6c 0 t 30 0 t 60 0.25 0.38 0.40 0.60 0.58 0.87 y 0.11 y 0.21 y 0.17 y 0.33 y 0.24 y 0.48 char. code temp. coeff. (ppm/ d ) * 1 capacitance change from 25 d value (%) max. min. y 30 dy 10 d max. min. table a (1) y 55 d max. min. 2c 3c 4c 0 t 60 0 t 120 0 t 250 0.33 0.55 1.02 0.49 0.82 1.54 0.82 1.37 2.56 y 0.18 y 0.36 y 0.75 y 0.27 y 0.54 y 1.13 y 0.45 y 0.90 y 1.88 char. nominal values (ppm/ d ) * 2 capacitance change from 20 d value (%) max. min. y 25 dy 10 d max. min. y 55 d max. min. no. item specifications test method temperature compensating type more than 500m or 25 f (whichever is smaller) within t 7.5% or t 0.75pf (whichever is larger) 30pf and over: q u 200 30pf and below: q u 100 w c c: nominal capacitance (pf) 10 3 appearance i.r. capacitance change q no marking defects the measured and observed characteristics should satisfy the specifications in the following table. humidity load 17 apply the rated voltage at 40 t 2 d and 90 to 95% humidity for 500 t 12 hours. remove and let sit for 24 t 2 hours at room temperature, then measure. the charge/discharge current is less than 50ma. more than 1,000m or 50 f (whichever is smaller) 0.1pf v c v 1pf: 350m pf below 1pf f c v 5pf: 300m below 5pf f c v 10pf: 250m below 10pf f c v 33pf: 400m below the esr should be measured at room temperature, and frequency 1 t 0.2ghz with the equivalent of boonton model 34a. the esr should be measured at room temperature, and frequency 500 t 50mhz with the equivalent of hp8753b. within t 3% or t 0.3pf (whichever is larger) 30pf and over: q u 350 10pf and over, 30pf and below: q u 275 w c 10pf and below: q u 200 w 10c c: nominal capacitance (pf) 5 2 appearance i.r. capacitance change q no marking defects the measured and observed characteristics should satisfy the specifications in the following table. high temperature load esr 18 19 apply 200% of the rated voltage for 1000 t 12 hours at the maximum operating temperature t 3 d . let sit for 24 t 2 hours (temperature compensating type) at room temperature, then measure. the charge/discharge current is less than 50ma. gjm series specifications and test methods 99 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, it?s specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
100 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. chip monolithic ceramic capacitors high frequency gqm series n features 1. hiq and low esr at vhf, uhf, microwave 2. feature improvement, low power consumption for mobile telecommunication. (base station, terminal, etc.) n applications high frequency circuit (mobile telecommunication, etc.) l t part number lw t dimensions (mm) e g min. 1.6 0.1 0.8 0.1 0.2 to 0.5 0.5 0.8 0.1 gqm188 1.6 0.15 0.8 0.15 0.2 to 0.5 0.5 0.7 0.1 gqm187 2.0 0.1 1.25 0.1 0.2 to 0.7 0.7 0.85 0.1 gqm219 ( 50,100v ) 2.0 0.15 1.25 0.15 0.2 to 0.7 0.7 0.85 0.15 gqm219 ( 250v ) 2.8 0.5 2.8 0.4 0.3 min. 1.0 1.15 0.2 gqm22m w e e g for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
101 ! note ?please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. ?this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. capacitance table the part number code is shown in ( ) and unit is shown in [ ]. < >: eia [inch] code temperature compensating type c0g(5c) characteristics 7 ex.7: t dimension [mm] lxw [mm] rated voltage [vdc] capacitance 0.10pf( r10 ) 0.20pf( r20 ) 0.30pf( r30 ) 0.40pf( r40 ) 0.50pf( r50 ) 0.75pf( r75 ) 1.0pf( 1r0 ) 1.1pf( 1r1 ) 1.2pf( 1r2 ) 1.3pf( 1r3 ) 1.5pf( 1r5 ) 1.6pf( 1r6 ) 1.8pf( 1r8 ) 2.0pf( 2r0 ) 2.2pf( 2r2 ) 2.4pf( 2r4 ) 2.7pf( 2r7 ) 3.0pf( 3r0 ) 3.3pf( 3r3 ) 3.6pf( 3r6 ) 3.9pf( 3r9 ) 4.0pf( 4r0 ) 4.3pf( 4r3 ) 4.7pf( 4r7 ) 5.0pf( 5r0 ) 5.1pf( 5r1 ) 5.6pf( 5r6 ) 6.0pf( 6r0 ) 6.2pf( 6r2 ) 6.8pf( 6r8 ) 7.0pf( 7r0 ) 7.5pf( 7r5 ) 8.0pf( 8r0 ) 8.2pf( 8r2 ) 9.0pf( 9r0 ) 9.1pf( 9r1 ) 10pf( 100 ) 11pf( 110 ) 12pf( 120 ) 13pf( 130 ) 15pf( 150 ) 16pf( 160 ) 18pf( 180 ) 20pf( 200 ) 22pf( 220 ) 24pf( 240 ) 27pf( 270 ) 30pf( 300 ) 33pf( 330 ) lxw [mm] rated voltage [vdc] capacitance 36pf( 360 ) 39pf( 390 ) 43pf( 430 ) 47pf( 470 ) 51pf( 510 ) 56pf( 560 ) 62pf( 620 ) 68pf( 680 ) 75pf( 750 ) 82pf( 820 ) 91pf( 910 ) 100pf( 101 ) 1.6x0.8 ( 18 ) <0603> 2.0x1.25 ( 21 ) <0805> 250 ( 2e ) 100 ( 2a ) 50 ( 1h ) 250 ( 2e ) 100 ( 2a ) 50 ( 1h ) 1.6x0.8 ( 18 ) <0603> 2.0x1.25 ( 21 ) <0805> 250 ( 2e ) 100 ( 2a ) 50 ( 1h ) 250 ( 2e ) 100 ( 2a ) 50 ( 1h ) 2.8x2.8 ( 22 ) <1111> 500 ( 2h ) 2.8x2.8 ( 22 ) <1111> 500 ( 2h ) 7 7 7 7 8 8 8 8 8 8 8 8 8 8 8 8 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 m m m m m m m m m m m m 9 9 9 9 9 9 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 m m m m m m m m m m m m m m m m m m m m m m m m m m m m m m m m m m m m m m m m m m m m m for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
102 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. the part number code is shown in ( ) and unit is shown in [ ]. < >: eia [inch] code lxw [mm] rated volt. [vdc] capacitance tolerance part number 250( 2e ) gqm1875c2er10bb12d gqm1875c2er20bb12d gqm1875c2er30bb12d gqm1875c2er30cb12d gqm1875c2er40bb12d gqm1875c2er40cb12d gqm1875c2er50bb12d gqm1875c2er50cb12d gqm1875c2er75bb12d gqm1875c2er75cb12d gqm1875c2e1r0bb12d gqm1875c2e1r0cb12d gqm1875c2e1r1bb12d gqm1875c2e1r1cb12d gqm1875c2e1r2bb12d gqm1875c2e1r2cb12d gqm1875c2e1r3bb12d gqm1875c2e1r3cb12d gqm1875c2e1r5bb12d gqm1875c2e1r5cb12d gqm1875c2e1r6bb12d gqm1875c2e1r6cb12d gqm1875c2e1r8bb12d gqm1875c2e1r8cb12d gqm1875c2e2r0bb12d gqm1875c2e2r0cb12d gqm1875c2e2r2bb12d gqm1875c2e2r2cb12d gqm1875c2e2r4bb12d gqm1875c2e2r4cb12d gqm1875c2e2r7bb12d gqm1875c2e2r7cb12d gqm1875c2e3r0bb12d gqm1875c2e3r0cb12d gqm1875c2e3r3bb12d gqm1875c2e3r3cb12d gqm1875c2e3r6bb12d gqm1875c2e3r6cb12d gqm1875c2e3r9bb12d gqm1875c2e3r9cb12d gqm1875c2e4r0bb12d gqm1875c2e4r0cb12d gqm1875c2e4r3bb12d gqm1875c2e4r3cb12d gqm1875c2e4r7bb12d gqm1875c2e4r7cb12d gqm1875c2e5r0bb12d gqm1875c2e5r0cb12d 100( 2a ) gqm1885c2ar50bb01d gqm1885c2ar50cb01d gqm1885c2ar75bb01d gqm1885c2ar75cb01d gqm1885c2a1r0bb01d gqm1885c2a1r0cb01d gqm1885c2a1r1bb01d gqm1885c2a1r1cb01d gqm1885c2a1r2bb01d gqm1885c2a1r2cb01d gqm1885c2a1r3bb01d gqm1885c2a1r3cb01d gqm1885c2a1r5bb01d gqm1885c2a1r5cb01d gqm1885c2a1r6bb01d gqm1885c2a1r6cb01d gqm1885c2a1r8bb01d gqm1885c2a1r8cb01d gqm1885c2a2r0bb01d gqm1885c2a2r0cb01d gqm1885c2a2r2bb01d gqm1885c2a2r2cb01d gqm1885c2a2r4bb01d gqm1885c2a2r4cb01d gqm1885c2a2r7bb01d gqm1885c2a2r7cb01d gqm1885c2a3r0bb01d gqm1885c2a3r0cb01d gqm1885c2a3r3bb01d gqm1885c2a3r3cb01d gqm1885c2a3r6bb01d gqm1885c2a3r6cb01d gqm1885c2a3r9bb01d gqm1885c2a3r9cb01d gqm1885c2a4r0bb01d gqm1885c2a4r0cb01d gqm1885c2a4r3bb01d gqm1885c2a4r3cb01d gqm1885c2a4r7bb01d gqm1885c2a4r7cb01d gqm1885c2a5r0bb01d gqm1885c2a5r0cb01d 1.6x0.8( 18 )<0603> 0.10pf( r10 ) 0.20pf( r20 ) 0.30pf( r30 ) 0.40pf( r40 ) 0.50pf( r50 ) 0.75pf( r75 ) 1.0pf( 1r0 ) 1.1pf( 1r1 ) 1.2pf( 1r2 ) 1.3pf( 1r3 ) 1.5pf( 1r5 ) 1.6pf( 1r6 ) 1.8pf( 1r8 ) 2.0pf( 2r0 ) 2.2pf( 2r2 ) 2.4pf( 2r4 ) 2.7pf( 2r7 ) 3.0pf( 3r0 ) 3.3pf( 3r3 ) 3.6pf( 3r6 ) 3.9pf( 3r9 ) 4.0pf( 4r0 ) 4.3pf( 4r3 ) 4.7pf( 4r7 ) 5.0pf( 5r0 ) 0.1pf( b ) 0.1pf( b ) 0.1pf( b ) 0.25pf( c ) 0.1pf( b ) 0.25pf( c ) 0.1pf( b ) 0.25pf( c ) 0.1pf( b ) 0.25pf( c ) 0.1pf( b ) 0.25pf( c ) 0.1pf( b ) 0.25pf( c ) 0.1pf( b ) 0.25pf( c ) 0.1pf( b ) 0.25pf( c ) 0.1pf( b ) 0.25pf( c ) 0.1pf( b ) 0.25pf( c ) 0.1pf( b ) 0.25pf( c ) 0.1pf( b ) 0.25pf( c ) 0.1pf( b ) 0.25pf( c ) 0.1pf( b ) 0.25pf( c ) 0.1pf( b ) 0.25pf( c ) 0.1pf( b ) 0.25pf( c ) 0.1pf( b ) 0.25pf( c ) 0.1pf( b ) 0.25pf( c ) 0.1pf( b ) 0.25pf( c ) 0.1pf( b ) 0.25pf( c ) 0.1pf( b ) 0.25pf( c ) 0.1pf( b ) 0.25pf( c ) 0.1pf( b ) 0.25pf( c ) temperature compensating type c0g(5c) characteristics gq m 18 7 5c 2e r10 b b12 d packaging code in part number shows std 180mm reel taping. q product id w series e dimensions (lxw) r dimension (t) t temperature characteristics y rated voltage u capacitance i capacitance tolerance o individual specification code !0 packaging (part number) w q e r t y u i o !0 for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
103 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. the part number code is shown in ( ) and unit is shown in [ ]. < >: eia [inch] code lxw [mm] rated volt. [vdc] capacitance tolerance part number 250( 2e ) gqm1875c2e5r1cb12d gqm1875c2e5r1db12d gqm1875c2e5r6cb12d gqm1875c2e5r6db12d gqm1875c2e6r0cb12d gqm1875c2e6r0db12d gqm1875c2e6r2cb12d gqm1875c2e6r2db12d gqm1875c2e6r8cb12d gqm1875c2e6r8db12d gqm1875c2e7r0cb12d gqm1875c2e7r0db12d gqm1875c2e7r5cb12d gqm1875c2e7r5db12d gqm1875c2e8r0cb12d gqm1875c2e8r0db12d gqm1875c2e8r2cb12d gqm1875c2e8r2db12d gqm1875c2e9r0cb12d gqm1875c2e9r0db12d gqm1875c2e9r1cb12d gqm1875c2e9r1db12d gqm1875c2e100gb12d gqm1875c2e100jb12d gqm1875c2e110gb12d gqm1875c2e110jb12d gqm1875c2e120gb12d gqm1875c2e120jb12d gqm1875c2e130gb12d gqm1875c2e130jb12d gqm1875c2e150gb12d gqm1875c2e150jb12d gqm1875c2e160gb12d gqm1875c2e160jb12d gqm1875c2e180gb12d gqm1875c2e180jb12d gqm1875c2e200gb12d gqm1875c2e200jb12d gqm1875c2e220gb12d gqm1875c2e220jb12d gqm1875c2e240gb12d gqm1875c2e240jb12d gqm1875c2e270gb12d gqm1875c2e270jb12d gqm1875c2e300gb12d gqm1875c2e300jb12d 100( 2a ) gqm1885c2a5r1cb01d gqm1885c2a5r1db01d gqm1885c2a5r6cb01d gqm1885c2a5r6db01d gqm1885c2a6r0cb01d gqm1885c2a6r0db01d gqm1885c2a6r2cb01d gqm1885c2a6r2db01d gqm1885c2a6r8cb01d gqm1885c2a6r8db01d 50( 1h ) gqm1885c1h7r0cb01d gqm1885c1h7r0db01d gqm1885c1h7r5cb01d gqm1885c1h7r5db01d gqm1885c1h8r0cb01d gqm1885c1h8r0db01d gqm1885c1h8r2cb01d gqm1885c1h8r2db01d gqm1885c1h9r0cb01d gqm1885c1h9r0db01d gqm1885c1h9r1cb01d gqm1885c1h9r1db01d gqm1885c1h100gb01d gqm1885c1h100jb01d gqm1885c1h110gb01d gqm1885c1h110jb01d gqm1885c1h120gb01d gqm1885c1h120jb01d gqm1885c1h130gb01d gqm1885c1h130jb01d gqm1885c1h150gb01d gqm1885c1h150jb01d gqm1885c1h160gb01d gqm1885c1h160jb01d gqm1885c1h180gb01d gqm1885c1h180jb01d gqm1885c1h200gb01d gqm1885c1h200jb01d gqm1885c1h220gb01d gqm1885c1h220jb01d gqm1885c1h240gb01d gqm1885c1h240jb01d gqm1885c1h270gb01d gqm1885c1h270jb01d gqm1885c1h300gb01d gqm1885c1h300jb01d 1.6x0.8( 18 )<0603> 5.1pf( 5r1 ) 5.6pf( 5r6 ) 6.0pf( 6r0 ) 6.2pf( 6r2 ) 6.8pf( 6r8 ) 7.0pf( 7r0 ) 7.5pf( 7r5 ) 8.0pf( 8r0 ) 8.2pf( 8r2 ) 9.0pf( 9r0 ) 9.1pf( 9r1 ) 10pf( 100 ) 11pf( 110 ) 12pf( 120 ) 13pf( 130 ) 15pf( 150 ) 16pf( 160 ) 18pf( 180 ) 20pf( 200 ) 22pf( 220 ) 24pf( 240 ) 27pf( 270 ) 30pf( 300 ) 0.25pf( c ) 0.5pf( d ) 0.25pf( c ) 0.5pf( d ) 0.25pf( c ) 0.5pf( d ) 0.25pf( c ) 0.5pf( d ) 0.25pf( c ) 0.5pf( d ) 0.25pf( c ) 0.5pf( d ) 0.25pf( c ) 0.5pf( d ) 0.25pf( c ) 0.5pf( d ) 0.25pf( c ) 0.5pf( d ) 0.25pf( c ) 0.5pf( d ) 0.25pf( c ) 0.5pf( d ) 2%( g ) 5%( j ) 2%( g ) 5%( j ) 2%( g ) 5%( j ) 2%( g ) 5%( j ) 2%( g ) 5%( j ) 2%( g ) 5%( j ) 2%( g ) 5%( j ) 2%( g ) 5%( j ) 2%( g ) 5%( j ) 2%( g ) 5%( j ) 2%( g ) 5%( j ) 2%( g ) 5%( j ) temperature compensating type c0g(5c) characteristics for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
104 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. the part number code is shown in ( ) and unit is shown in [ ]. < >: eia [inch] code lxw [mm] rated volt. [vdc] capacitance tolerance part number 250( 2e ) gqm1875c2e330gb12d gqm1875c2e330jb12d gqm1875c2e360gb12d gqm1875c2e360jb12d gqm1875c2e390gb12d gqm1875c2e390jb12d gqm1875c2e430gb12d gqm1875c2e430jb12d gqm1875c2e470gb12d gqm1875c2e470jb12d 50( 1h ) gqm1885c1h330gb01d gqm1885c1h330jb01d gqm1885c1h360gb01d gqm1885c1h360jb01d gqm1885c1h390gb01d gqm1885c1h390jb01d gqm1885c1h430gb01d gqm1885c1h430jb01d gqm1885c1h470gb01d gqm1885c1h470jb01d gqm1885c1h510gb01d gqm1885c1h510jb01d gqm1885c1h560gb01d gqm1885c1h560jb01d gqm1885c1h620gb01d gqm1885c1h620jb01d gqm1885c1h680gb01d gqm1885c1h680jb01d gqm1885c1h750gb01d gqm1885c1h750jb01d gqm1885c1h820gb01d gqm1885c1h820jb01d gqm1885c1h910gb01d gqm1885c1h910jb01d gqm1885c1h101gb01d gqm1885c1h101jb01d 1.6x0.8( 18 )<0603> 33pf( 330 ) 36pf( 360 ) 39pf( 390 ) 43pf( 430 ) 47pf( 470 ) 51pf( 510 ) 56pf( 560 ) 62pf( 620 ) 68pf( 680 ) 75pf( 750 ) 82pf( 820 ) 91pf( 910 ) 100pf( 101 ) 2%( g ) 5%( j ) 2%( g ) 5%( j ) 2%( g ) 5%( j ) 2%( g ) 5%( j ) 2%( g ) 5%( j ) 2%( g ) 5%( j ) 2%( g ) 5%( j ) 2%( g ) 5%( j ) 2%( g ) 5%( j ) 2%( g ) 5%( j ) 2%( g ) 5%( j ) 2%( g ) 5%( j ) 2%( g ) 5%( j ) temperature compensating type c0g(5c) characteristics packaging code in part number shows std 180mm reel taping. q product id w series e dimensions (lxw) r dimension (t) t temperature characteristics y rated voltage u capacitance i capacitance tolerance o individual specification code !0 packaging (part number) w q e r t y u i o !0 gq m 18 7 5c 2e 330 g b12 d for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
105 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. the part number code is shown in ( ) and unit is shown in [ ]. < >: eia [inch] code lxw [mm] rated volt. [vdc] capacitance tolerance part number 250( 2e ) gqm2195c2er50bb12d gqm2195c2er50cb12d gqm2195c2er75bb12d gqm2195c2er75cb12d gqm2195c2e1r0bb12d gqm2195c2e1r0cb12d gqm2195c2e1r1bb12d gqm2195c2e1r1cb12d gqm2195c2e1r2bb12d gqm2195c2e1r2cb12d gqm2195c2e1r3bb12d gqm2195c2e1r3cb12d gqm2195c2e1r5bb12d gqm2195c2e1r5cb12d gqm2195c2e1r6bb12d gqm2195c2e1r6cb12d gqm2195c2e1r8bb12d gqm2195c2e1r8cb12d gqm2195c2e2r0bb12d gqm2195c2e2r0cb12d gqm2195c2e2r2bb12d gqm2195c2e2r2cb12d gqm2195c2e2r4bb12d gqm2195c2e2r4cb12d gqm2195c2e2r7bb12d gqm2195c2e2r7cb12d gqm2195c2e3r0bb12d gqm2195c2e3r0cb12d gqm2195c2e3r3bb12d gqm2195c2e3r3cb12d gqm2195c2e3r6bb12d gqm2195c2e3r6cb12d gqm2195c2e3r9bb12d gqm2195c2e3r9cb12d gqm2195c2e4r0bb12d gqm2195c2e4r0cb12d gqm2195c2e4r3bb12d gqm2195c2e4r3cb12d gqm2195c2e4r7bb12d gqm2195c2e4r7cb12d gqm2195c2e5r0bb12d gqm2195c2e5r0cb12d gqm2195c2e5r1cb12d gqm2195c2e5r1db12d gqm2195c2e5r6cb12d gqm2195c2e5r6db12d gqm2195c2e6r0cb12d gqm2195c2e6r0db12d 100( 2a ) 500( 2h ) gqm2195c2ar50bb01d gqm2195c2ar50cb01d gqm2195c2ar75bb01d gqm2195c2ar75cb01d gqm2195c2a1r0bb01d gqm2195c2a1r0cb01d gqm2195c2a1r1bb01d gqm2195c2a1r1cb01d gqm2195c2a1r2bb01d gqm2195c2a1r2cb01d gqm2195c2a1r3bb01d gqm2195c2a1r3cb01d gqm2195c2a1r5bb01d gqm2195c2a1r5cb01d gqm2195c2a1r6bb01d gqm2195c2a1r6cb01d gqm2195c2a1r8bb01d gqm2195c2a1r8cb01d gqm2195c2a2r0bb01d gqm2195c2a2r0cb01d gqm2195c2a2r2bb01d gqm2195c2a2r2cb01d gqm2195c2a2r4bb01d gqm2195c2a2r4cb01d gqm2195c2a2r7bb01d gqm2195c2a2r7cb01d gqm2195c2a3r0bb01d gqm2195c2a3r0cb01d gqm2195c2a3r3bb01d gqm2195c2a3r3cb01d gqm2195c2a3r6bb01d gqm2195c2a3r6cb01d gqm2195c2a3r9bb01d gqm2195c2a3r9cb01d gqm2195c2a4r0bb01d gqm2195c2a4r0cb01d gqm2195c2a4r3bb01d gqm2195c2a4r3cb01d gqm2195c2a4r7bb01d gqm2195c2a4r7cb01d gqm2195c2a5r0bb01d gqm2195c2a5r0cb01d gqm2195c2a5r1cb01d gqm2195c2a5r1db01d gqm2195c2a5r6cb01d gqm2195c2a5r6db01d gqm2195c2a6r0cb01d gqm2195c2a6r0db01d gqm22m5c2hr50bb01l gqm22m5c2hr50cb01l gqm22m5c2hr75bb01l gqm22m5c2hr75cb01l gqm22m5c2h1r0bb01l gqm22m5c2h1r0cb01l gqm22m5c2h1r1bb01l gqm22m5c2h1r1cb01l gqm22m5c2h1r2bb01l gqm22m5c2h1r2cb01l gqm22m5c2h1r3bb01l gqm22m5c2h1r3cb01l gqm22m5c2h1r5bb01l gqm22m5c2h1r5cb01l gqm22m5c2h1r6bb01l gqm22m5c2h1r6cb01l gqm22m5c2h1r8bb01l gqm22m5c2h1r8cb01l gqm22m5c2h2r0bb01l gqm22m5c2h2r0cb01l gqm22m5c2h2r2bb01l gqm22m5c2h2r2cb01l gqm22m5c2h2r4bb01l gqm22m5c2h2r4cb01l gqm22m5c2h2r7bb01l gqm22m5c2h2r7cb01l gqm22m5c2h3r0bb01l gqm22m5c2h3r0cb01l gqm22m5c2h3r3bb01l gqm22m5c2h3r3cb01l gqm22m5c2h3r6bb01l gqm22m5c2h3r6cb01l gqm22m5c2h3r9bb01l gqm22m5c2h3r9cb01l gqm22m5c2h4r0bb01l gqm22m5c2h4r0cb01l gqm22m5c2h4r3bb01l gqm22m5c2h4r3cb01l gqm22m5c2h4r7bb01l gqm22m5c2h4r7cb01l gqm22m5c2h5r0bb01l gqm22m5c2h5r0cb01l gqm22m5c2h5r1cb01l gqm22m5c2h5r1db01l gqm22m5c2h5r6cb01l gqm22m5c2h5r6db01l gqm22m5c2h6r0cb01l gqm22m5c2h6r0db01l 2.0x1.25( 21 )<0805> 2.8x2.8( 22 )<1111> 0.50pf( r50 ) 0.75pf( r75 ) 1.0pf( 1r0 ) 1.1pf( 1r1 ) 1.2pf( 1r2 ) 1.3pf( 1r3 ) 1.5pf( 1r5 ) 1.6pf( 1r6 ) 1.8pf( 1r8 ) 2.0pf( 2r0 ) 2.2pf( 2r2 ) 2.4pf( 2r4 ) 2.7pf( 2r7 ) 3.0pf( 3r0 ) 3.3pf( 3r3 ) 3.6pf( 3r6 ) 3.9pf( 3r9 ) 4.0pf( 4r0 ) 4.3pf( 4r3 ) 4.7pf( 4r7 ) 5.0pf( 5r0 ) 5.1pf( 5r1 ) 5.6pf( 5r6 ) 6.0pf( 6r0 ) 0.1pf( b ) 0.25pf( c ) 0.1pf( b ) 0.25pf( c ) 0.1pf( b ) 0.25pf( c ) 0.1pf( b ) 0.25pf( c ) 0.1pf( b ) 0.25pf( c ) 0.1pf( b ) 0.25pf( c ) 0.1pf( b ) 0.25pf( c ) 0.1pf( b ) 0.25pf( c ) 0.1pf( b ) 0.25pf( c ) 0.1pf( b ) 0.25pf( c ) 0.1pf( b ) 0.25pf( c ) 0.1pf( b ) 0.25pf( c ) 0.1pf( b ) 0.25pf( c ) 0.1pf( b ) 0.25pf( c ) 0.1pf( b ) 0.25pf( c ) 0.1pf( b ) 0.25pf( c ) 0.1pf( b ) 0.25pf( c ) 0.1pf( b ) 0.25pf( c ) 0.1pf( b ) 0.25pf( c ) 0.1pf( b ) 0.25pf( c ) 0.1pf( b ) 0.25pf( c ) 0.25pf( c ) 0.5pf( d ) 0.25pf( c ) 0.5pf( d ) 0.25pf( c ) 0.5pf( d ) temperature compensating type c0g(5c) characteristics for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
106 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. the part number code is shown in ( ) and unit is shown in [ ]. < >: eia [inch] code lxw [mm] rated volt. [vdc] capacitance tolerance part number 250( 2e ) gqm2195c2e6r2cb12d gqm2195c2e6r2db12d gqm2195c2e6r8cb12d gqm2195c2e6r8db12d gqm2195c2e7r0cb12d gqm2195c2e7r0db12d gqm2195c2e7r5cb12d gqm2195c2e7r5db12d gqm2195c2e8r0cb12d gqm2195c2e8r0db12d gqm2195c2e8r2cb12d gqm2195c2e8r2db12d gqm2195c2e9r0cb12d gqm2195c2e9r0db12d gqm2195c2e9r1cb12d gqm2195c2e9r1db12d gqm2195c2e100gb12d gqm2195c2e100jb12d gqm2195c2e110gb12d gqm2195c2e110jb12d gqm2195c2e120gb12d gqm2195c2e120jb12d gqm2195c2e130gb12d gqm2195c2e130jb12d gqm2195c2e150gb12d gqm2195c2e150jb12d gqm2195c2e160gb12d gqm2195c2e160jb12d gqm2195c2e180gb12d gqm2195c2e180jb12d gqm2195c2e200gb12d gqm2195c2e200jb12d gqm2195c2e220gb12d gqm2195c2e220jb12d gqm2195c2e240gb12d gqm2195c2e240jb12d gqm2195c2e270gb12d gqm2195c2e270jb12d gqm2195c2e300gb12d gqm2195c2e300jb12d gqm2195c2e330gb12d gqm2195c2e330jb12d gqm2195c2e360gb12d gqm2195c2e360jb12d gqm2195c2e390gb12d gqm2195c2e390jb12d 100( 2a ) gqm2195c2a6r2cb01d gqm2195c2a6r2db01d gqm2195c2a6r8cb01d gqm2195c2a6r8db01d gqm2195c2a7r0cb01d gqm2195c2a7r0db01d gqm2195c2a7r5cb01d gqm2195c2a7r5db01d gqm2195c2a8r0cb01d gqm2195c2a8r0db01d gqm2195c2a8r2cb01d gqm2195c2a8r2db01d gqm2195c2a9r0cb01d gqm2195c2a9r0db01d gqm2195c2a9r1cb01d gqm2195c2a9r1db01d gqm2195c2a100gb01d gqm2195c2a100jb01d gqm2195c2a110gb01d gqm2195c2a110jb01d gqm2195c2a120gb01d gqm2195c2a120jb01d gqm2195c2a130gb01d gqm2195c2a130jb01d gqm2195c2a150gb01d gqm2195c2a150jb01d gqm2195c2a160gb01d gqm2195c2a160jb01d gqm2195c2a180gb01d gqm2195c2a180jb01d 50( 1h ) 500( 2h ) gqm2195c1h200gb01d gqm2195c1h200jb01d gqm2195c1h220gb01d gqm2195c1h220jb01d gqm2195c1h240gb01d gqm2195c1h240jb01d gqm2195c1h270gb01d gqm2195c1h270jb01d gqm2195c1h300gb01d gqm2195c1h300jb01d gqm2195c1h330gb01d gqm2195c1h330jb01d gqm2195c1h360gb01d gqm2195c1h360jb01d gqm2195c1h390gb01d gqm2195c1h390jb01d gqm22m5c2h6r2cb01l gqm22m5c2h6r2db01l gqm22m5c2h6r8cb01l gqm22m5c2h6r8db01l gqm22m5c2h7r0cb01l gqm22m5c2h7r0db01l gqm22m5c2h7r5cb01l gqm22m5c2h7r5db01l gqm22m5c2h8r0cb01l gqm22m5c2h8r0db01l gqm22m5c2h8r2cb01l gqm22m5c2h8r2db01l gqm22m5c2h9r0cb01l gqm22m5c2h9r0db01l gqm22m5c2h9r1cb01l gqm22m5c2h9r1db01l gqm22m5c2h100gb01l gqm22m5c2h100jb01l gqm22m5c2h110gb01l gqm22m5c2h110jb01l gqm22m5c2h120gb01l gqm22m5c2h120jb01l gqm22m5c2h130gb01l gqm22m5c2h130jb01l gqm22m5c2h150gb01l gqm22m5c2h150jb01l gqm22m5c2h160gb01l gqm22m5c2h160jb01l gqm22m5c2h180gb01l gqm22m5c2h180jb01l gqm22m5c2h200gb01l gqm22m5c2h200jb01l gqm22m5c2h220gb01l gqm22m5c2h220jb01l gqm22m5c2h240gb01l gqm22m5c2h240jb01l gqm22m5c2h270gb01l gqm22m5c2h270jb01l gqm22m5c2h300gb01l gqm22m5c2h300jb01l gqm22m5c2h330gb01l gqm22m5c2h330jb01l gqm22m5c2h360gb01l gqm22m5c2h360jb01l gqm22m5c2h390gb01l gqm22m5c2h390jb01l 2.0x1.25( 21 )<0805> 2.8x2.8( 22 )<1111> 6.2pf( 6r2 ) 6.8pf( 6r8 ) 7.0pf( 7r0 ) 7.5pf( 7r5 ) 8.0pf( 8r0 ) 8.2pf( 8r2 ) 9.0pf( 9r0 ) 9.1pf( 9r1 ) 10pf( 100 ) 11pf( 110 ) 12pf( 120 ) 13pf( 130 ) 15pf( 150 ) 16pf( 160 ) 18pf( 180 ) 20pf( 200 ) 22pf( 220 ) 24pf( 240 ) 27pf( 270 ) 30pf( 300 ) 33pf( 330 ) 36pf( 360 ) 39pf( 390 ) 0.25pf( c ) 0.5pf( d ) 0.25pf( c ) 0.5pf( d ) 0.25pf( c ) 0.5pf( d ) 0.25pf( c ) 0.5pf( d ) 0.25pf( c ) 0.5pf( d ) 0.25pf( c ) 0.5pf( d ) 0.25pf( c ) 0.5pf( d ) 0.25pf( c ) 0.5pf( d ) 2%( g ) 5%( j ) 2%( g ) 5%( j ) 2%( g ) 5%( j ) 2%( g ) 5%( j ) 2%( g ) 5%( j ) 2%( g ) 5%( j ) 2%( g ) 5%( j ) 2%( g ) 5%( j ) 2%( g ) 5%( j ) 2%( g ) 5%( j ) 2%( g ) 5%( j ) 2%( g ) 5%( j ) 2%( g ) 5%( j ) 2%( g ) 5%( j ) 2%( g ) 5%( j ) temperature compensating type c0g(5c) characteristics packaging code in part number shows std 180mm reel taping. q product id w series e dimensions (lxw) r dimension (t) t temperature characteristics y rated voltage u capacitance i capacitance tolerance o individual specification code !0 packaging (part number) w q e r t y u i o !0 gq m 21 9 5c 2e 6r2 c b12 d for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
107 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. the part number code is shown in ( ) and unit is shown in [ ]. < >: eia [inch] code lxw [mm] rated volt. [vdc] capacitance tolerance part number 250( 2e ) gqm2195c2e430gb12d gqm2195c2e430jb12d gqm2195c2e470gb12d gqm2195c2e470jb12d gqm2195c2e510gb12d gqm2195c2e510jb12d gqm2195c2e560gb12d gqm2195c2e560jb12d gqm2195c2e620gb12d gqm2195c2e620jb12d gqm2195c2e680gb12d gqm2195c2e680jb12d gqm2195c2e750gb12d gqm2195c2e750jb12d gqm2195c2e820gb12d gqm2195c2e820jb12d gqm2195c2e910gb12d gqm2195c2e910jb12d gqm2195c2e101gb12d gqm2195c2e101jb12d 50( 1h ) 500( 2h ) gqm2195c1h430gb01d gqm2195c1h430jb01d gqm2195c1h470gb01d gqm2195c1h470jb01d gqm2195c1h510gb01d gqm2195c1h510jb01d gqm2195c1h560gb01d gqm2195c1h560jb01d gqm2195c1h620gb01d gqm2195c1h620jb01d gqm2195c1h680gb01d gqm2195c1h680jb01d gqm2195c1h750gb01d gqm2195c1h750jb01d gqm2195c1h820gb01d gqm2195c1h820jb01d gqm2195c1h910gb01d gqm2195c1h910jb01d gqm2195c1h101gb01d gqm2195c1h101jb01d gqm22m5c2h430gb01l gqm22m5c2h430jb01l gqm22m5c2h470gb01l gqm22m5c2h470jb01l gqm22m5c2h510gb01l gqm22m5c2h510jb01l gqm22m5c2h560gb01l gqm22m5c2h560jb01l gqm22m5c2h620gb01l gqm22m5c2h620jb01l gqm22m5c2h680gb01l gqm22m5c2h680jb01l gqm22m5c2h750gb01l gqm22m5c2h750jb01l gqm22m5c2h820gb01l gqm22m5c2h820jb01l gqm22m5c2h910gb01l gqm22m5c2h910jb01l gqm22m5c2h101gb01l gqm22m5c2h101jb01l 2.0x1.25( 21 )<0805> 2.8x2.8( 22 )<1111> 43pf( 430 ) 47pf( 470 ) 51pf( 510 ) 56pf( 560 ) 62pf( 620 ) 68pf( 680 ) 75pf( 750 ) 82pf( 820 ) 91pf( 910 ) 100pf( 101 ) 2%( g ) 5%( j ) 2%( g ) 5%( j ) 2%( g ) 5%( j ) 2%( g ) 5%( j ) 2%( g ) 5%( j ) 2%( g ) 5%( j ) 2%( g ) 5%( j ) 2%( g ) 5%( j ) 2%( g ) 5%( j ) 2%( g ) 5%( j ) temperature compensating type c0g(5c) characteristics for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
! note 1. this specifications and test methods is downloaded from the website of murata manufacturing co.,ltd. therefore, it's specifi cations are subject to change or our products in it may be discontinued without advance notice. 0. please check with our sales representatives or product engineers before ordering. 2. this specifications and test methods has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product 0. specifications before ordering. gqm series specifications and test methods see the previous page. within the specified dimensions no defects or abnormalities more than 10,000m no defects or abnormalities y 55 to 125 d operating temperature rated voltage appearance dimension dielectric strength insulation resistance 1 2 3 4 5 6 using calipers the insulation resistance should be measured with a dc voltage not exceeding the rated voltage at 25 d and 75%rh max. and within 2 minutes of charging, provided the charge/discharge current is less than 50ma. no failure should be observed when 300% * of the rated voltage is applied between the terminations for 1 to 5 seconds, provided the charge/discharge current is less than 50ma. * gqm187, gqm219(250v), gqm22: 250% of the rated voltage visual inspection the rated voltage is defined as the maximum voltage that may be applied continuously to the capacitor. when ac voltage is superimposed on dc voltage, v p-p or v o-p , whichever is larger, should be maintained within the rated voltage range. reference temperature: 25 d item no. test method specifications 30pf and over: q u 1400 30pf and below: q u 800 w 20c c: nominal capacitance (pf) within the specified tolerance capacitance q 7 8 the capacitance/q should be measured at 25 d at the frequency and voltage shown in the table. continued on the following page. no removal of the terminations or other defect should occur. adhesive strength of termination 10 solder the capacitor to the test jig (glass epoxy board) shown in fig. 1 using a eutectic solder. then apply 10n* force in parallel with the test jig for 10 t 1 sec. the soldering should be done either with an iron or using the reflow method and should be conducted with care so that the soldering is uniform and free of defects such as heat shock. *5n (gqm188) a b c baked electrode or copper foil solder resist 30pf and over: q u 1400 30pf and below: q u 800 w 20c c: nominal capacitance (pf) no defects or abnormalities within the specified tolerance vibration resistance 11 solder the capacitor to the test jig (glass epoxy board) in the same manner and under the same conditions as (10). the capacitor should be subjected to a simple harmonic motion having a total amplitude of 1.5mm, the frequency being varied uniformly between the approximate limits of 10 and 55hz. the frequency range, from 10 to 55hz and return to 10hz, should be traversed in approximately 1 minute. this motion should be applied for a period of 2 hours in each of 3 mutually perpendicular directions (total of 6 hours). appearance capacitance q frequency 1 t 0.1mhz voltage 0.5 to 5vrms within the specified tolerance (table a) within t 0.2% or t 0.05pf (whichever is larger) temperature coefficient capacitance drift capacitance temperature characteristics 9 the capacitance change should be measured after 5 min. at each specified temp. stage. the temperature coefficient is determined using the capacitance measured in step 3 as a reference. when cycling the temperature sequentially from steps 1 through 5 the capacitance should be within the specified tolerance for the temperature coefficient and capacitance change as in table a. the capacitance drift is calculated by dividing the differences between the maximum and minimum measured values in the steps 1, 3 and 5 by the capacitance value in step 3. step 1 2 3 4 5 reference temp. t 2 y 55 t 3 reference temp. t 2 125 t 3 reference temp. t 2 temperature ( d ) (in mm) fig. 1 type a b c gqm18 gqm21 gqm22 1.0 1.2 2.2 3.0 4.0 5.0 1.2 1.65 2.9 gqm series specifications and test methods 108 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, it?s specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
! note 1. this specifications and test methods is downloaded from the website of murata manufacturing co.,ltd. therefore, it's specifi cations are subject to change or our products in it may be discontinued without advance notice. 0. please check with our sales representatives or product engineers before ordering. 2. this specifications and test methods has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product 0. specifications before ordering. gqm series specifications and test methods deflection 12 solder the capacitor on the test jig (glass epoxy board) shown in fig. 2 using a eutectic solder. then apply a force in the direction shown in fig. 3. the soldering should be done by the reflow method and should be conducted with care so that the soldering is uniform and free of defects such as heat shock. y z ^ a ?
v z [ ? ? b
tu w xy z [ \] _ ` | ?a ? ? -? q r s u v w z ] ^ | ? ? tu x | ? q tu | a u | u y | a c
v w z [ ? ? y ] ^ a ? 100 z ] ^ ? ? s t w 40 f 4.5 capacitance meter flexure : v 1 20 50 r230 pressurizing speed: 1.0mm/sec. pressurize 45 45 fig. 3 t: 1.6mm continued from the preceding page. item no. test method specifications 75% of the terminations are to be soldered evenly and continuously. solderability of termination 13 immerse the capacitor in a solution of ethanol (jis-k-8101) and rosin (jis-k-5902) (25% rosin in weight proportion). preheat at 80 to 120 d for 10 to 30 seconds. after preheating, immerse in eutectic solder solution for 2 t 0.5 seconds at 230 t 5 d or sn-3.0ag-0.5cu solder solution for 2 t 0.5 seconds at 245 t 5c. more than 10,000m within t 2.5% or t 0.25 pf (whichever is larger) 30pf and over: q u 1400 30pf and below: q u 800 w 20c c: nominal capacitance (pf) appearance i.r. capacitance change q no defects or abnormalities. the measured and observed characteristics should satisfy the specifications in the following table. resistance to soldering heat 14 preheat the capacitor at 120 to 150 d for 1 minute. immerse the capacitor in a eutectic solder or sn-3.0ag-0.5cu solder solution at 270 t 5 d for 10 t 0.5 seconds. let sit at room temperature for 24 t 2 hours, then measure. no defects. dielectric strength more than 10,000m within t 2.5% or t 0.25pf (whichever is larger) 30pf and over: q u 1400 30pf and below: q u 800 w 20c c: nominal capacitance (pf) appearance i.r. capacitance change q no defects or abnormalities. the measured and observed characteristics should satisfy the specifications in the following table. temperature cycle 15 fix the capacitor to the supporting jig in the same manner and under the same conditions as (10). perform the five cycles according to the four heat treatments listed in the following table. let sit for 24 t 2 hours at room temperature, then measure. no defects. dielectric strength more than 1,000m within t 5% or t 0.5pf (whichever is larger) 30pf and over: q u 350 10pf and over, 30pf and below: q u 275+5c/2 10pf and below: q u 200 w 10c c: nominal capacitance (pf) appearance i.r. capacitance change q no defects or abnormalities. the measured and observed characteristics should satisfy the specifications in the following table. humidity steady state 16 set the capacitor at 40 t 2 d and in 90 to 95% humidity for 500 t 12 hours. remove and set for 24 t 2 hours at room temperature, then measure. (in mm) fig. 2 type a b c gqm18 gqm21 gqm22 1.0 1.2 2.2 3.0 4.0 5.0 1.2 1.65 2.9 step 1234 temp. ( d ) time (min.) min. operating temp. w 0/ y 3 room temp. max. operating temp. w 3/ y 0 room temp. 30 t 3 2 to 3 30 t 3 2 to 3 continued on the following page. within t 5% or t 0.5pf (whichever is larger) capacitance change no defects or abnormalities. appearance gqm series specifications and test methods 109 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
! note 1. this specifications and test methods is downloaded from the website of murata manufacturing co.,ltd. therefore, it's specifi cations are subject to change or our products in it may be discontinued without advance notice. 0. please check with our sales representatives or product engineers before ordering. 2. this specifications and test methods has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product 0. specifications before ordering. gqm series specifications and test methods continued from the preceding page. item no. test method specifications more than 1,000m within t 3% or t 0.3pf (whichever is larger) 30pf and over: q u 350 10pf and over, 30pf and below: q u 275 w 5c/2 10pf and below: q u 200 w 10c c: nominal capacitance (pf) appearance i.r. capacitance change q no defects or abnormalities. the measured and observed characteristics should satisfy the specifications in the following table. high temperature load 18 apply 200%* of the rated voltage for 1000 t 12 hours at the maximum operating temperature t 3 d . set for 24 t 2 hours at room temperature, then measure. the charge/discharge current is less than 50ma. *gqm22: 150% of the rated voltage more than 500m within t 7.5% or t 0.75pf (whichever is larger) 30pf and over: q u 200 30pf and below: q u 100 w 10c/3 c: nominal capacitance (pf) appearance i.r. capacitance change q no defects or abnormalities. the measured and observed characteristics should satisfy the specifications in the following table. humidity load 17 apply the rated voltage at 40 t 2 d and 90 to 95% humidity for 500 t 12 hours. remove and let sit for 24 t 2 hours at room temperature then measure. the charge/discharge current is less than 50ma. * 1: nominal values denote the temperature coefficient within a range of 25 to 125 d . 5c 0 t 30 0.25 0.40 0.58 y 0.11 y 0.17 y 0.24 char. nominal values (ppm/ d ) * 1 capacitance change from 25 d (%) max. min. y 30 dy 10 d max. min. table a y 55 d max. min. gqm series specifications and test methods 110 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
gqm series data n q - frequency characteristics n resonant frequency - capacitance 100m 1 10 100 1000 10000 1g frequency (hz) gqm18 q 10g 1pf 6.8pf 2.4pf 0.1 0 1 10 100 1 10 100 capacitance (pf) resonant frequency (ghz) gqm18 gqm21 gqm series data 111 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
112 ! note ?please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. ?this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. chip monolithic ceramic capacitors monolithic microchip gma series n features 1. better microwave characteristics 2. suitable for by passing 3. high density mounting n applications 1. optical device for telecommunication 2. ic, built-in ic packaging 3. measuring equipment part number lwt dimensions (mm) 0.5 0.05 0.5 0.05 0.35 0.05 0.8 0.05 0.8 0.05 0.5 0.1 gma05x 0.38 0.05 0.38 0.05 0.3 0.05 gma0d3 gma085 l outer electrode: au plated w t for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
113 ! note ?please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. ?this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. capacitance table high dielectric constant type x7r(r7)/x5r(r6) characteristics 0.38x0.38 ( 0d ) <015015> 0.5x0.5 ( 05 ) <0202> 10 ( 1a ) 100 ( 2a ) 25 ( 1e ) 10 ( 1a ) 6.3 ( 0j ) x ex.x: t dimension [mm] lxw [mm] rated voltage [vdc] capacitance 100pf( 101 ) 150pf( 151 ) 220pf( 221 ) 330pf( 331 ) 470pf( 471 ) 680pf( 681 ) 1000pf( 102 ) 1500pf( 152 ) 2200pf( 222 ) 3300pf( 332 ) 4700pf( 472 ) 6800pf( 682 ) 10000pf( 103 ) 15000pf( 153 ) 22000pf( 223 ) 33000pf( 333 ) 47000pf( 473 ) 68000pf( 683 ) 0.10 f( 104 ) 0.47 f( 474 ) 3 x x x x x x x x x x x x x x x x 0.8x0.8 ( 08 ) <0303> 100 ( 2a ) 25 ( 1e ) 10 ( 1a ) 6.3 ( 0j ) the part number code is shown in ( ) and unit is shown in [ ]. < >: eia [inch] code 5 5 5 5 5 5 5 5 5 5 5 5 5 for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
114 ! note ?please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. ?this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. the part number code is shown in ( ) and unit is shown in [ ]. < >: eia [inch] code * please refer to gma series specifications and test method (2). lxw [mm] rated volt. [vdc] capacitance tolerance part number 10( 1a ) gma0d3r71a103ma01t 0.38x0.38( 0d )<015015> 10000pf( 103 ) 20%( m ) lxw [mm] rated volt. [vdc] capacitance tolerance part number 100( 2a ) gma05xr72a101ma01t gma05xr72a151ma01t gma05xr72a221ma01t gma05xr72a331ma01t gma05xr72a471ma01t gma05xr72a681ma01t gma05xr72a102ma01t 25( 1e ) gma05xr71e152ma11t gma05xr71e222ma11t gma05xr71e332ma11t gma05xr71e472ma11t 10( 1a ) gma05xr71a682ma01t gma05xr71a103ma01t gma05xr71a153ma01t gma05xr71a223ma01t 6.3( 0j ) gma05xr60j104me12t* 0.5x0.5( 05 )<0202> 100pf( 101 ) 150pf( 151 ) 220pf( 221 ) 330pf( 331 ) 470pf( 471 ) 680pf( 681 ) 1000pf( 102 ) 1500pf( 152 ) 2200pf( 222 ) 3300pf( 332 ) 4700pf( 472 ) 6800pf( 682 ) 10000pf( 103 ) 15000pf( 153 ) 22000pf( 223 ) 33000pf( 333 ) 47000pf( 473 ) 68000pf( 683 ) 0.10 f( 104 ) 20%( m ) 20%( m ) 20%( m ) 20%( m ) 20%( m ) 20%( m ) 20%( m ) 20%( m ) 20%( m ) 20%( m ) 20%( m ) 20%( m ) 20%( m ) 20%( m ) 20%( m ) 20%( m ) 20%( m ) 20%( m ) 20%( m ) lxw [mm] rated volt. [vdc] capacitance tolerance part number 100( 2a ) gma085r72a152ma01t gma085r72a222ma01t gma085r72a332ma01t gma085r72a472ma01t gma085r72a682ma01t 25( 1e ) gma085r71e103ma11t gma085r71e153ma11t gma085r71e223ma11t 10( 1a ) gma085r71a333ma01t gma085r71a473ma01t gma085r71a683ma01t gma085r71a104ma01t 6.3( 0j ) gma085r60j474me12t* 0.8x0.8( 08 )<0303> 1500pf( 152 ) 2200pf( 222 ) 3300pf( 332 ) 4700pf( 472 ) 6800pf( 682 ) 10000pf( 103 ) 15000pf( 153 ) 22000pf( 223 ) 33000pf( 333 ) 47000pf( 473 ) 68000pf( 683 ) 0.10 f( 104 ) 0.47 f( 474 ) 20%( m ) 20%( m ) 20%( m ) 20%( m ) 20%( m ) 20%( m ) 20%( m ) 20%( m ) 20%( m ) 20%( m ) 20%( m ) 20%( m ) 20%( m ) high dielectric constant type x7r(r7)/x5r(r6) characteristics packaging code in part number shows std tray. q product id w series e dimensions (lxw) r dimension (t) t temperature characteristics y rated voltage u capacitance i capacitance tolerance o individual specification code !0 packaging (part number) w q e r t y u i o !0 gm a 0d 3 r7 1a 103 m a01 t for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
continued on the following page. the capacitor should be set for 24 2 hours at room temperature after one hour of heat treatment at 150+0/?0 c, then measure for the initial measurement. fix the capacitor to the supporting jig in the same manner and under the same conditions as (11) and conduct the five cycles according to the temperatures and time shown in the following table. set it for 24 2 hours at room temperature, then measure. 12 temperature cycle appearance no defects or abnormalities capacitance change r7: within 7.5% d.f. r7: w.v.: 25v min.; 0.025 max. w.v.: 16v/10v; 0.035 max. i.r. more than 10,000m or 500 f (whichever is smaller) dielectric strength no defects ramp frequency from 10 to 55hz then return to 10hz all within 1 minute. amplitude: 1.5 mm (0.06 inch) max. total excursion. apply this motion for a period of 2 hours in each of 3 mutually perpendicular directions (total 6 hours). 11 vibration resistance appearance no defects or abnormalities capacitance within the specified tolerance d.f. r7: w.v.: 25v min.; 0.025 max. w.v.: 16v/10v; 0.035 max. mil-std-883 method 2011 condition d mount the capacitor on a gold metallized alumina substrate with au-sn (80/20) and bond a 25 m (0.001 inch) gold wire to the capacitor terminal using an ultrasonic ball bond. then, pull wire. 10 mechanical strength bond strength pull force: 0.03n min. the capacitance change should be measured after 5 min. at each specified temp. stage. ?he ranges of capacitance change compared with the reference temperature value over the temperature ranges shown in the table should be within the specified ranges.* *initial measurement for high dielectric constant type perform a heat treatment at 150 +0/?0 c for one hour and then let sit for 24 2 hours at room temperature. perform the initial measurement. 9 capacitance temperature characteristics no bias r7: within +/?5% (?5 to +125 c) die shear strength die shear force: 2n min. mil-std-883 method 2019 mount the capacitor on a gold metallized alumina substrate with au-sn (80/20). apply the force parallel to the substrate. mounting for testing: the capacitors should be mounted on the substrate as shown below using die bonding and wire bonding when tests no. 11 to 15 are performed. gma series specifications and test methods (1) step temp. ( c) time (min.) 1 min. operating temp. +0/? 30 3 2 room temp. 2 to 3 3 max. operating temp. +3/? 30 3 4 room temp. 2 to 3 step temperature ( c) 25 2 ?5 3 25 2 125 3 1 2 3 4 1 0.1khz 1 0.2vrms frequency voltage 8 dissipation factor (d.f.) r7: w.v.: 25v min.; 0.025 max. w.v.: 16v/10v; 0.035 max. the capacitance/d.f. should be measured at reference temperature at the frequency and voltage shown in the table. 7 capacitance within the specified tolerance the insulation resistance should be measured with a dc voltage not exceeding the rated voltage at normal temperature and humidity and within 2 minutes of charging. 6 insulation resistance more than 10,000m or 500 f (whichever is smaller) no failure should be observed when a voltage of 250% of the rated voltage is applied between the both terminations for 1 to 5 seconds, provided the charge/discharge current is less than 50ma. 5 dielectric strength no defects or abnormalities using calipers 4 dimensions within the specified dimensions visual inspection 3 appearance no defects or abnormalities the rated voltage is defined as the maximum voltage that may be applied continuously to the capacitor. when ac voltage is superimposed on dc voltage, v p-p or v o-p , whichever is larger, should be maintained within the rated voltage range. 2 rated voltage see the previous pages. reference temperature: 25 c 1 operating temperature range r7: ?5 to +125 c no. test method specifications item ! note 1. this specifications and test methods is downloaded from the website of murata manufacturing co.,ltd. therefore, it's specifi cations are subject to change or our products in it may be discontinued without advance notice. 0. please check with our sales representatives or product engineers before ordering. 2. this specifications and test methods has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product 0. specifications before ordering. gma series specifications and test methods (1) 115 ! note ?please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. ?this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. when no "*" is added in pns table, please refer to gma series specifications and test methods (1). when "*" is added in pns table, please refer to gma series specifications and test methods (2). for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
continued from the preceding page. a voltage treatment should be given to the capacitor, in which a dc voltage of 200% the rated voltage is applied for one hour at the maximum operating temperature; 3 c then it should be set for 24 2 hours at room temperature and the initial measurement should be conducted. then apply the above mentioned voltage continuously for 1000 12 hours at the same temperature, remove it from the bath, and set it for 24 2 hours at room temperature, then measure. the charge/discharge current is less than 50ma. 15 high temperature load appearance no defects or abnormalities capacitance change r7: within 12.5% d.f. r7: w.v.: 10v min.; 0.05 max. i.r. more than 1,000m or 50 f (whichever is smaller) apply the rated voltage for 500 12 hours at 40 2 c, in 90 to 95% humidity and set it for 24 2 hours at room temperature, then measure. the charge/discharge current is less than 50ma. 14 humidity load appearance no defects or abnormalities capacitance change r7: within 12.5% d.f. r7: w.v.: 10v min.; 0.05 max. i.r. more than 500m or 25 f (whichever is smaller) set the capacitor for 500 12 hours at 40 2 c, in 90 to 95% humidity. take it out and set it for 24 2 hours at room temperature, then measure. 13 humidity (steady state) appearance no defects or abnormalities capacitance change r7: within 12.5% d.f. r7: w.v.: 10v min.; 0.05 max. i.r. more than 1,000m or 50 f (whichever is smaller) mounting for testing: the capacitors should be mounted on the substrate as shown below using die bonding and wire bonding when tests no. 11 to 15 are performed. gma series specifications and test methods (1) alumina substrate gold land alumina substrate capacitor die bond gold wire gold land no. test method specifications item ! note 1. this specifications and test methods is downloaded from the website of murata manufacturing co.,ltd. therefore, it's specifi cations are subject to change or our products in it may be discontinued without advance notice. 0. please check with our sales representatives or product engineers before ordering. 2. this specifications and test methods has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product 0. specifications before ordering. gma series specifications and test methods (1) 116 ! note ?please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. ?this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. when no "*" is added in pns table, please refer to gma series specifications and test methods (1). when "*" is added in pns table, please refer to gma series specifications and test methods (2). for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
continued on the following page. the capacitor should be set for 24 2 hours at room temperature after one hour of heat treatment at 150+0/?0 c, then measure for the initial measurement. fix the capacitor to the supporting jig in the same manner and under the same conditions as (11) and conduct the five cycles according to the temperatures and time shown in the following table. set it for 48 4 hours at room temperature, then measure. 12 temperature sudden change appearance no defects or abnormalities. capacitance change r6 : within 7.5% d.f. r6 : 0.1 max. i.r. more than 50 ?f dielectric strength no defects ramp frequency from 10 to 55hz then return to 10hz all within 1 minute. amplitude: 1.5 mm (0.06 inch) max. total excursion. apply this motion for a period of 2 hours in each of 3 mutually perpendicular directions (total 6 hours). 11 vibration resistance appearance no defects or abnormalities. capacitance within the specified tolerance. d.f. r6 : 0.1 max. mil-std-883 method 2011 condition d mount the capacitor on a gold metallized alumina substrate with au-sn (80/20) and bond a 25 m (0.001 inch) gold wire to the capacitor terminal using an ultrasonic ball bond. then, pull wire. 10 mechanical strength bond strength pull force : 0.03n min. the capacitance change should be measured after 5 min. at each specified temp. stage. the ranges of capacitance change compared with the reference temperature value over the temperature ranges shown in the table should be within the specified ranges.* *initial measurement for high dielectric constant type perform a heat treatment at 150 +0/?0 c for one hour and then let sit for 24 2 hours at room temperature. perform the initial measurement. 9 capacitance temperature characteristics no bias r6 : within 15% (?5 c to +85 c) die shear strength die shear force : 2n min. mil-std-883 method 2019 mount the capacitor on a gold metallized alumina substrate with au-sn (80/20). apply the force parallel to the substrate. 8 dissipation factor (d.f.) r6 : 0.1 max. the capacitance/d.f. should be measured at reference temperature at the frequency and voltage shown in the table. 7 capacitance within the specified tolerance. the insulation resistance should be measured with a dc voltage not exceeding the rated voltage at normal temperature and humidity and within 1 minutes of charging. 6 insulation resistance more than 50 ?f no failure should be observed when 250% of the rated voltage is applied between the terminations for 1 to 5 seconds, provid- ed the charge/discharge current is less than 50ma. 5 dielectric strength no defects or abnormalities. using calipers. 4 dimensions within the specified dimensions. visual inspection. 3 appearance no defects or abnormalities. the rated voltage is defined as the maximum voltage that may be applied continuously to the capacitor. when ac voltage is superimposed on dc voltage, v p-p or v o-p , whichever is larger, should be maintained within the rated volt- age range. 2 rated voltage see the previous pages. reference temperature : 25 c 1 operating temperature range r6 : ?5 c to 85 c mounting for testing: the capacitors should be mounted on the substrate as shown below using die bonding and wire bonding when tests no. 11 to 14 are performed. gma series specifications and test methods (2) no. test method specifications item step temp. ( c) time (min.) 1 min. operating temp.+0/? 30 3 2 room temp. 2 to 3 3 max. operating temp. +3/? 30 3 4 room temp. 2 to 3 step temperature ( c) 25 2 ?5 3 25 2 85 3 1 2 3 4 capacitance frequency 1 0.1khz voltage 0.5 0.1vrms c v 10 f (6.3vmax.) ! note 1. this specifications and test methods is downloaded from the website of murata manufacturing co.,ltd. therefore, it's specifi cations are subject to change or our products in it may be discontinued without advance notice. 0. please check with our sales representatives or product engineers before ordering. 2. this specifications and test methods has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product 0. specifications before ordering. gma series specifications and test methods (2) 117 ! note ?please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. ?this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. when no "*" is added in pns table, please refer to gma series specifications and test methods (1). when "*" is added in pns table, please refer to gma series specifications and test methods (2). for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
continued from the preceding page. apply 150% of the rated voltage for 1000 12 hours at the maximum operating temperature 3 c. let sit for 24 2 hours at room temperature, then measure. the charge/ discharge current is less than 50ma. ?initial measurement perform a heat treatment at 150+0/?0 c for one hour and then let sit for 24 2 hours at room temperature. perform the initial measurement. ?measurement after test perform a heat treatment at 150+0/?0 c for one hour and then let sit for 24 2 hours at room temperature, then measure. 14 durability appearance no defects or abnormalities. capacitance change r6 : within 12.5% d.f. r6 : 0.2 max. i.r. more than 25 ?f apply the rated voltage for 500 12 hours at 40 2 c, in 90 to 95% humidity and set it for 24 2 hours at room temperature, then measure. the charge/discharge current is less than 50ma. ?initial measurement perform a heat treatment at 150+0/?0 c for one hour and then let sit for 24 2 hours at room temperature. perform the initial measurement. ?measurement after test perform a heat treatment at 150+0/?0 c for one hour and then let sit for 24 2 hours at room temperature, then measure. 13 high temperature high humidity (steady) appearance no defects or abnormalities. capacitance change r6 : within 12.5% d.f. r6 : 0.2 max. i.r. more than 12.5 ?f mounting for testing: the capacitors should be mounted on the substrate as shown below using die bonding and wire bonding when tests no. 11 to 14 are performed. gma series specifications and test methods (2) no. test method specifications item alumina substrate gold land alumina substrate capacitor die bond gold wire gold land ! note 1. this specifications and test methods is downloaded from the website of murata manufacturing co.,ltd. therefore, it's specifi cations are subject to change or our products in it may be discontinued without advance notice. 0. please check with our sales representatives or product engineers before ordering. 2. this specifications and test methods has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product 0. specifications before ordering. gma series specifications and test methods (2) 118 ! note ?please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. ?this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. when no "*" is added in pns table, please refer to gma series specifications and test methods (1). when "*" is added in pns table, please refer to gma series specifications and test methods (2). for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
119 ! note ?please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. ?this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. chip monolithic ceramic capacitors for bonding gmd series n features 1. small chip size (lxwxt: 0.6x0.3x0.3, 1.0x0.5x0.5mm) 2. available for wire/die bonding due to gold termination. 3. suitable for optical device for telecommunication, built-in ic packaging. n applications 1. optical device for telecommunication 2. ic, built-in ic packaging part number 0.6 0.03 1.0 0.05 0.3 0.03 0.5 0.05 0.3 0.03 0.5 0.05 0.12 to 0.22 0.15 to 0.35 0.16 0.3 gmd033 gmd155 l w t e g min. outer electrode: au l t w e e g dimensions (mm) for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
capacitance table 120 ! note ?please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. ?this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. high dielectric constant type x7r(r7)/x5r(r6) characteristics 25 ( 1e ) 0.6x0.3 ( 03 ) <0201> 16 ( 1c ) 10 ( 1a ) 50 ( 1h ) 1.0x0.5 ( 15 ) <0402> 25 ( 1e ) 16 ( 1c ) 3 ex.3: t dimension [mm] lxw [mm] rated voltage [vdc] capacitance 100pf( 101 ) 120pf( 121 ) 150pf( 151 ) 180pf( 181 ) 220pf( 221 ) 270pf( 271 ) 330pf( 331 ) 390pf( 391 ) 470pf( 471 ) 560pf( 561 ) 680pf( 681 ) 820pf( 821 ) 1000pf( 102 ) 1200pf( 122 ) 1500pf( 152 ) 1800pf( 182 ) 2200pf( 222 ) 2700pf( 272 ) 3300pf( 332 ) 3900pf( 392 ) 4700pf( 472 ) 5600pf( 562 ) 6800pf( 682 ) 8200pf( 822 ) 10000pf( 103 ) 12000pf( 123 ) 15000pf( 153 ) 18000pf( 183 ) 22000pf( 223 ) 27000pf( 273 ) 33000pf( 333 ) 39000pf( 393 ) 47000pf( 473 ) 56000pf( 563 ) 68000pf( 683 ) 82000pf( 823 ) 0.10 f( 104 ) 0.12 f( 124 ) 0.15 f( 154 ) 0.18 f( 184 ) 0.22 f( 224 ) 0.27 f( 274 ) 0.33 f( 334 ) 0.39 f( 394 ) 0.47 f( 474 ) the part number code is shown in ( ) and unit is shown in [ ]. < >: eia [inch] code 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 6.3 ( 0j ) 0.6x0.3 ( 03 ) <0201> 10 ( 1a ) 3 3 3 3 5 5 5 5 5 5 5 5 1.0x0.5 ( 15 ) <0402> for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
121 ! note ?please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. ?this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. the part number code is shown in ( ) and unit is shown in [ ]. < >: eia [inch] code lxw [mm] rated volt. [vdc] capacitance tolerance part number 25( 1e ) gmd033r71e101ka01d gmd033r71e121ka01d gmd033r71e151ka01d gmd033r71e181ka01d gmd033r71e221ka01d gmd033r71e271ka01d gmd033r71e331ka01d gmd033r71e391ka01d gmd033r71e471ka01d gmd033r71e561ka01d gmd033r71e681ka01d gmd033r71e821ka01d gmd033r71e102ka01d gmd033r71e122ka01d gmd033r71e152ka01d 16( 1c ) gmd033r71c182ka11d gmd033r71c222ka11d gmd033r71c272ka11d gmd033r71c332ka11d 10( 1a ) gmd033r71a392ka01d gmd033r71a472ka01d gmd033r71a562ka01d gmd033r71a682ka01d gmd033r71a822ka01d gmd033r71a103ka01d 0.6x0.3( 03 )<0201> 100pf( 101 ) 120pf( 121 ) 150pf( 151 ) 180pf( 181 ) 220pf( 221 ) 270pf( 271 ) 330pf( 331 ) 390pf( 391 ) 470pf( 471 ) 560pf( 561 ) 680pf( 681 ) 820pf( 821 ) 1000pf( 102 ) 1200pf( 122 ) 1500pf( 152 ) 1800pf( 182 ) 2200pf( 222 ) 2700pf( 272 ) 3300pf( 332 ) 3900pf( 392 ) 4700pf( 472 ) 5600pf( 562 ) 6800pf( 682 ) 8200pf( 822 ) 10000pf( 103 ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) high dielectric constant type x7r(r7) characteristics packaging code in part number shows std 180mm reel taping. q product id w series e dimensions (lxw) r dimension (t) t temperature characteristics y rated voltage u capacitance i capacitance tolerance o individual specification code !0 packaging (part number) w q e r t y u i o !0 gm d 03 3 r7 1e 101 k a01 d for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
122 ! note ?please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. ?this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. the part number code is shown in ( ) and unit is shown in [ ]. < >: eia [inch] code lxw [mm] rated volt. [vdc] capacitance tolerance part number 50( 1h ) gmd155r71h221ka01d gmd155r71h271ka01d gmd155r71h331ka01d gmd155r71h391ka01d gmd155r71h471ka01d gmd155r71h561ka01d gmd155r71h681ka01d gmd155r71h821ka01d gmd155r71h102ka01d gmd155r71h122ka01d gmd155r71h152ka01d gmd155r71h182ka01d gmd155r71h222ka01d gmd155r71h272ka01d gmd155r71h332ka01d gmd155r71h392ka01d gmd155r71h472ka01d 25( 1e ) gmd155r71e562ka01d gmd155r71e682ka01d gmd155r71e822ka01d gmd155r71e103ka01d gmd155r71e123ka01d gmd155r71e153ka01d gmd155r71e183ka01d gmd155r71e223ka01d gmd155r71e273ka11d gmd155r71e333ka11d gmd155r71e393ka11d gmd155r71e473ka11d 16( 1c ) gmd155r71c563ka11d gmd155r71c683ka11d gmd155r71c823ka11d gmd155r71c104ka11d 1.0x0.5( 15 )<0402> 220pf( 221 ) 270pf( 271 ) 330pf( 331 ) 390pf( 391 ) 470pf( 471 ) 560pf( 561 ) 680pf( 681 ) 820pf( 821 ) 1000pf( 102 ) 1200pf( 122 ) 1500pf( 152 ) 1800pf( 182 ) 2200pf( 222 ) 2700pf( 272 ) 3300pf( 332 ) 3900pf( 392 ) 4700pf( 472 ) 5600pf( 562 ) 6800pf( 682 ) 8200pf( 822 ) 10000pf( 103 ) 12000pf( 123 ) 15000pf( 153 ) 18000pf( 183 ) 22000pf( 223 ) 27000pf( 273 ) 33000pf( 333 ) 39000pf( 393 ) 47000pf( 473 ) 56000pf( 563 ) 68000pf( 683 ) 82000pf( 823 ) 0.10 f( 104 ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) high dielectric constant type x7r(r7) characteristics packaging code in part number shows std 180mm reel taping. q product id w series e dimensions (lxw) r dimension (t) t temperature characteristics y rated voltage u capacitance i capacitance tolerance o individual specification code !0 packaging (part number) w q e r t y u i o !0 gm d 15 5 r7 1h 221 k a01 d for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
123 ! note ?please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. ?this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. the part number code is shown in ( ) and unit is shown in [ ]. < >: eia [inch] code * please refer to gmd series specifications and test method (2). lxw [mm] rated volt. [vdc] capacitance tolerance part number 6.3( 0j ) gmd033r60j563ke11d* gmd033r60j683ke11d* gmd033r60j823ke11d* gmd033r60j104ke11d* 10( 1a ) gmd155r61a124ke12d* gmd155r61a154ke12d* gmd155r61a184ke12d* gmd155r61a224ke12d* gmd155r61a274ke11d* gmd155r61a334ke11d* gmd155r61a394ke11d* gmd155r61a474ke11d* 0.6x0.3( 03 )<0201> 1.0x0.5( 15 )<0402> 56000pf( 563 ) 68000pf( 683 ) 82000pf( 823 ) 0.10 f( 104 ) 0.12 f( 124 ) 0.15 f( 154 ) 0.18 f( 184 ) 0.22 f( 224 ) 0.27 f( 274 ) 0.33 f( 334 ) 0.39 f( 394 ) 0.47 f( 474 ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) 10%( k ) high dielectric constant type x5r(r6) characteristics for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
continued on the following page. the capacitor should be set for 24 2 hours at room temperature after one hour of heat treatment at 150+0/?0 c, then measure for the initial measurement. fix the capacitor to the supporting jig in the same manner and under the same conditions as (11) and conduct the five cycles according to the temperatures and time shown in the following table. set it for 24 2 hours at room temperature, then measure. 12 temperature cycle appearance no defects or abnormalities. capacitance change r7 : within 7.5% d.f. r7 : w.v. 25vmin. : 0.025 max. w.v. 16/10v : 0.035 max. i.r. more than 10,000m or 500 ?f (whichever is smaller) dielectric strength no defects ramp frequency from 10 to 55hz then return to 10hz all within 1 minute. amplitude: 1.5 mm (0.06 inch) max. total excursion. apply this motion for a period of 2 hours in each of 3 mutually perpendicular directions (total 6 hours). 11 vibration resistance appearance no defects or abnormalities. capacitance within the specified tolerance. d.f. r7 : w.v. 25vmin. : 0.025 max. w.v. 16/10v : 0.035 max. mil-std-883 method 2011 condition d mount the capacitor on a gold metallized alumina substrate with au-sn (80/20) and bond a 25mm (0.001 inch) gold wire to the capacitor terminal using an ultrasonic ball bond. then, pull wire. 10 mechanical strength bond strength pull force : 0.03n min. die shear strength die shear force : 2n min. mil-std-883 method 2019 mount the capacitor on a gold metallized alumina substrate with au-sn (80/20). apply the force parallel to the substrate. the capacitance change should be measured after 5 min. at each specified temp. stage. the ranges of capacitance change compared with the reference temperature value over the temperature ranges shown in the table should be within the specified ranges.* *initial measurement for high dielectric constant type perform a heat treatment at 150 +0/?0 c for one hour and then let sit for 24 2 hours at room temperature. perform the initial measurement. 9 capacitance temperature characteristics no bias r7 : within 15% (?5 c to +125 c) 8 dissipation factor (d.f.) r7 : w.v. 25vmin. : 0.025 max. w.v. 16/10v : 0.035 max. the capacitance/d.f. should be measured at reference temperature at the frequency and voltage shown in the table. 7 capacitance within the specified tolerance. the insulation resistance should be measured with a dc voltage not exceeding the rated voltage at normal temperature and humidity and within 2 minutes of charging. 6 insulation resistance more than 10,000m or 500 ?f (whichever is smaller) no failure should be observed when 250% of the rated voltage is applied between the terminations for 1 to 5 seconds, provid- ed the charge/discharge current is less than 50ma. 5 dielectric strength no defects or abnormality. using calipers. 4 dimensions within the specified dimensions. visual inspection. 3 appearance no defects or abnormalities. the rated voltage is defined as the maximum voltage that may be applied continuously to the capacitor. when ac voltage is superimposed on dc voltage, v p-p or v o-p , whichever is larger, should be maintained within the rated volt- age range. 2 rated voltage see the previous pages. reference temperature : 25 c 1 operating temperature range r7 : ?5 c to 125 c mounting for testing: the capacitors should be mounted on the substrate as shown below using die bonding. when tests no. 11 to 15 are performed. gmd series specifications and test methods (1) no. test method specifications item step temp. ( c) time (min.) 1 min. operating temp.+0/? 30+/? 2 room temp. 2 to 3 3 max. operating temp. +3/? 30+/? 4 room temp. 2 to 3 step temperature ( c) 25 2 ?5 3 25 2 125 3 1 2 3 4 1 0.1khz 1 0.2vrms frequency voltage ! note 1. this specifications and test methods is downloaded from the website of murata manufacturing co.,ltd. therefore, it's specifi cations are subject to change or our products in it may be discontinued without advance notice. 0. please check with our sales representatives or product engineers before ordering. 2. this specifications and test methods has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product 0. specifications before ordering. gmd series specifications and test methods (1) 124 ! note ?please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. ?this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. when no "*" is added in pns table, please refer to gmd series specifications and test methods (1). when "*" is added in pns table, please refer to gmd series specifications and test methods (2). for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
continued from the preceding page. a voltage treatment should be given to the capacitor, in which a dc voltage of 200% the rated voltage is applied for one hour at the maximum operating temperature; 3 c then it should be set for 24 2 hours at room temperature and the initial measurement should be conducted. then apply the above-mentioned voltage continuously for 1000 12 hours at the same temperature, remove it from the bath, and set it for 24 2 hours at room temperature, then measure. the charge/discharge current is less than 50ma. 15 high temperature load appearance no defects or abnormalities. capacitance change r7 : within 12.5% d.f. r7 : w.v. 25vmin. : 0.05 max. w.v. 16/10v : 0.05 max. i.r. more than 1,000m or 50 ?f (whichever is smaller) apply the rated voltage for 500 12 hours at 40 2 c, in 90 to 95% humidity and set it for 24 2 hours at room temperature, then measure. the charge/discharge current is less than 50ma. 14 humidity load appearance no defects or abnormalities. capacitance change r7 : within 12.5% d.f. r7 : w.v. 25vmin. : 0.05 max. w.v. 16/10v : 0.05 max. i.r. more than 500m or 25 ?f (whichever is smaller) set the capacitor for 500 12 hours at 40 2 c, in 90 to 95% humidity. take it out and set it for 24 2 hours at room temperature, then measure. 13 humidity (steady state) appearance no defects or abnormalities. capacitance change r7 : within 12.5% d.f. r7 : w.v. 25vmin. : 0.05 max. w.v. 16/10v : 0.05 max. i.r. more than 1,000m or 50 ?f (whichever is smaller) mounting for testing: the capacitors should be mounted on the substrate as shown below using die bonding. when tests no. 11 to 15 are performed. gmd series specifications and test methods (1) no. test method specifications item alumina substrate gold land alumina substrate capacitor die bond gold wire gold wire gold land ! note 1. this specifications and test methods is downloaded from the website of murata manufacturing co.,ltd. therefore, it's specifi cations are subject to change or our products in it may be discontinued without advance notice. 0. please check with our sales representatives or product engineers before ordering. 2. this specifications and test methods has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product 0. specifications before ordering. gmd series specifications and test methods (1) 125 ! note ?please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. ?this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. when no "*" is added in pns table, please refer to gmd series specifications and test methods (1). when "*" is added in pns table, please refer to gmd series specifications and test methods (2). for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
continued on the following page. the capacitor should be set for 24 2 hours at room temperature after one hour of heat treatment at 150+0/?0 c, then measure for the initial measurement. fix the capacitor to the supporting jig in the same manner and under the same conditions as (11) and conduct the five cycles according to the temperatures and time shown in the following table. set it for 24 2 hours at room temperature, then measure. 12 temperature sudden change appearance no defects or abnormalities. capacitance change r6 : within 7.5% d.f. r6 : 0.1 max. i.r. more than 50 ?f dielectric strength no defects ramp frequency from 10 to 55hz then return to 10hz all within 1 minute. amplitude: 1.5 mm (0.06 inch) max. total excursion. apply this motion for a period of 2 hours in each of 3 mutually perpendicular directions (total 6 hours). 11 vibration resistance appearance no defects or abnormalities. capacitance within the specified tolerance. d.f. r6 : 0.1 max. mil-std-883 method 2011 condition d mount the capacitor on a gold metallized alumina substrate with au-sn (80/20) and bond a 25 m (0.001 inch) gold wire to the capacitor terminal using an ultrasonic ball bond. then, pull wire. 10 mechanical strength bond strength pull force : 0.03n min. the capacitance change should be measured after 5 min. at each specified temp. stage. the ranges of capacitance change compared with the reference temperature value over the temperature ranges shown in the table should be within the specified ranges.* *initial measurement for high dielectric constant type perform a heat treatment at 150 +0/?0 c for one hour and then let sit for 24 2 hours at room temperature. perform the initial measurement. 9 capacitance temperature characteristics no bias r6 : within 15% (?5 c to +85 c) die shear strength die shear force : 2n min. mil-std-883 method 2019 mount the capacitor on a gold metallized alumina substrate with au-sn (80/20). apply the force parallel to the substrate. 8 dissipation factor (d.f.) r6 : 0.1 max. the capacitance/d.f. should be measured at reference temperature at the frequency and voltage shown in the table. *1 gmd155 r6 1a 124 to 224 are applied to 0.5 0.1 vrms. 7 capacitance within the specified tolerance. the insulation resistance should be measured with a dc voltage not exceeding the rated voltage at normal temperature and humidity and within 1 minutes of charging. 6 insulation resistance more than 50 ?f no failure should be observed when 250% of the rated voltage is applied between the terminations for 1 to 5 seconds, provid- ed the charge/discharge current is less than 50ma. 5 dielectric strength no defects or abnormalities. using calipers. 4 dimensions within the specified dimensions. visual inspection. 3 appearance no defects or abnormalities. the rated voltage is defined as the maximum voltage that may be applied continuously to the capacitor. when ac voltage is superimposed on dc voltage, v p-p or v o-p , whichever is larger, should be maintained within the rated volt- age range. 2 rated voltage see the previous pages. reference temperature : 25 c 1 operating temperature range r6 : ?5 c to 85 c mounting for testing: the capacitors should be mounted on the substrate as shown below using die bonding. when tests no. 11 to 14 are performed. gmd series specifications and test methods (2) no. test method specifications item step temp. ( c) time (min.) 1 min. operating temp.+0/? 30 3 2 room temp. 2 to 3 3 max. operating temp. +3/? 30 3 4 room temp. 2 to 3 step temperature ( c) 25 2 ?5 3 25 2 85 3 1 2 3 4 capacitance frequency 1 0.1khz 1 0.1khz voltage 1.0 0.2vrms 0.5 0.1vrms c v 10 f (10vmin.)* 1 c v 10 f (6.3vmax.) ! note 1. this specifications and test methods is downloaded from the website of murata manufacturing co.,ltd. therefore, it's specifi cations are subject to change or our products in it may be discontinued without advance notice. 0. please check with our sales representatives or product engineers before ordering. 2. this specifications and test methods has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product 0. specifications before ordering. gmd series specifications and test methods (2) 126 ! note ?please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. ?this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. when no "*" is added in pns table, please refer to gmd series specifications and test methods (1). when "*" is added in pns table, please refer to gmd series specifications and test methods (2). for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
continued from the preceding page. apply 150%* 2 of the rated voltage for 1000 12 hours at the maximum operating temperature 3 c. let sit for 24 2 hours at room temperature, then measure. the charge/ discharge current is less than 50ma. *2 gmd155 r6 1a 274 to 474 are applied to 120%. ?initial measurement perform a heat treatment at 150+0/?0 c for one hour and then let sit for 24 2 hours at room temperature. perform the initial measurement. ?measurement after test perform a heat treatment at 150+0/?0 c for one hour and then let sit for 24 2 hours at room temperature, then measure. 14 durability appearance no defects or abnormalities. capacitance change r6 : within 12.5% d.f. r6 : 0.2 max. i.r. more than 25 ?f apply the rated voltage for 500 12 hours at 40 2 c, in 90 to 95% humidity and set it for 24 2 hours at room temperature, then measure. the charge/discharge current is less than 50ma. ?initial measurement perform a heat treatment at 150+0/?0 c for one hour and then let sit for 24 2 hours at room temperature. perform the initial measurement. ?measurement after test perform a heat treatment at 150+0/?0 c for one hour and then let sit for 24 2 hours at room temperature, then measure. 13 high temperature high humidity (steady) appearance no defects or abnormalities. capacitance change r6 : within 12.5% d.f. r6 : 0.2 max. i.r. more than 12.5 ?f mounting for testing: the capacitors should be mounted on the substrate as shown below using die bonding. when tests no. 11 to 14 are performed. gmd series specifications and test methods (2) no. test method specifications item alumina substrate gold land alumina substrate capacitor die bond gold wire gold wire gold land ! note 1. this specifications and test methods is downloaded from the website of murata manufacturing co.,ltd. therefore, it's specifi cations are subject to change or our products in it may be discontinued without advance notice. 0. please check with our sales representatives or product engineers before ordering. 2. this specifications and test methods has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product 0. specifications before ordering. gmd series specifications and test methods (2) 127 ! note ?please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. ?this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. when no "*" is added in pns table, please refer to gmd series specifications and test methods (1). when "*" is added in pns table, please refer to gmd series specifications and test methods (2). for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
part number dimensions (mm) wt bulk bag bulk case ?180mm reel paper tape embossed tape paper tape embossed tape d bulk : b tray : t c l packaging code jk ?330mm reel l quantity (pcs.) n minimum quantity guide 1) 4mm width, 1mm pitch embossed taping. 2) there are parts without bulk case package. 3) tray 4) lll15: ?180mm reel paper taping packaging code: e, ?330mm reel paper taping packaging code: f continued on the following page. high power type high frequency microchip array low esl grm02 grm03 grm15 grm18 grm21 grm31 grm32 grm43 grm55 gjm03 gjm15 gqm18 gqm21 gqm22 gma0d gma05 gma08 gmd03 gmd15 gnm0m gnm1m gnm21 gnm31 lll15 lll18/llr18 lll21 lll31 lla18 lla21 lla31 llm21 llm31 0.4 0.6 1.0 1.6 2.0 3.2 3.2 4.5 5.7 0.6 1.0 1.6 2.0 2.8 0.38 0.5 0.8 0.6 1.0 0.9 1.37 2.0 3.2 0.5 0.8 1.25 1.6 1.6 2.0 3.2 2.0 3.2 0.2 0.3 0.5 0.8 1.25 1.6 2.5 3.2 5.0 0.3 0.5 0.8 1.25 2.8 0.38 0.5 0.8 0.3 0.5 0.6 1.0 1.25 1.6 1.0 1.6 2.0 3.2 0.8 1.25 1.6 1.25 1.6 0.2 0.3 0.25/0.3 0.5 0.5 0.8 0.6 0.85 1.0/1.25 0.6/0.85 1.15 1.6 0.85 1.15 1.35 1.6 1.15 2.5 2.8 1.15 2.5 3.2 0.3 0.5 0.7/0.8 0.85 1.15 0.3 0.35 0.5 0.3 0.5 0.45 0.5/0.6/0.8 0.5/0.6/0.85 0.8/0.85 1.0/1.15 0.3 0.5 0.5/0.6 0.85 0.5/0.7 1.15 0.5 0.5 0.85 0.5 0.85 1.15 0.5 0.5 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 500 1,000 1,000 500 500 1,000 1,000 1,000 1,000 1,000 400 3) 400 3) 400 3) 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 - - - 50,000 2) - 15,000 2) 10,000 - 5,000 2) - - - - - - - - - - - - - - - - - 50,000 - - - - - - - - - - - - - - - - - - - - - - - - - - - - 50,000 50,000 50,000 10,000 10,000 10,000 10,000 - 10,000 - - 10,000 - - - - - - - - - - - - 50,000 50,000 10,000 10,000 - - - - 50,000 50,000 50,000 10,000 10,000 10,000 - 50,000 4) - - - - - - - - - - - - - - - - - - - - - 10,000 - 10,000 6,000 - 10,000 8,000 6,000 4,000 5,000 4,000 2,000 1,500 5,000 4,000 2,000 1,500 - - - - 4,000 - - - - - - - - - 10,000 - 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 - 15,000 10,000 10,000 4,000 4,000 4,000 4,000 - 4,000 - - 4,000 - - - - - - - - - - - - 15,000 10,000 4,000 4,000 - - - - 15,000 10,000 10,000 4,000 4,000 4,000 - 10,000 4) - - - - - - - - - - - - - 40,000 1) - - - - - - - 3,000 - 3,000 2,000 - 3,000 2,000 2,000 1,000 1,000 1,000 500 500 1,000 1,000 500 300 - - - - 1,000 - - - - - - - - - 3,000 - 4,000 4,000 3,000 4,000 3,000 4,000 4,000 3,000 4,000 3,000 3,000 4,000 4,000 1.35/1.6 1.8/2.0 1.8/2.0 2.5 1.35/1.6 1.8/2.0 for general purpose package 128 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information package ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
n tape carrier packaging (1) dimensions of reel 2.0 0.5 ?180mm reel 5 1.5 for 4mm wide tape 10 1.5 for 8mm wide tape 14 1.5 for 12mm wide tape ?50 min. ?13.0 0.5 ?21.0 0.8 (2) dimensions of paper tape 4.0 0.1 8mm width, 4mm pitch tape 8mm width, 2mm pitch tape ?1.5 +0.1 - 0 4.0 0.1 1.75 0.1 1.1 max. 8.0 0.3 direction of feed a b 3.5 0.05 2.0 0.1 a part number b grm18 gqm18 gnm1m grm21 (t v 0.85mm) gqm21 gnm21 grm31 (t v 0.85mm) gnm31 (t v 0.8mm) grm32 (t v 0.85mm) 1.05 0.1 2.0 0.2 2.8 0.2 1.55 0.15 1.85 0.1 3.6 0.2 3.6 0.2 2.3 0.15 1.17 0.05 1.55 0.05 gnm0m 0.72 1.02 a* part number b* gjm03 grm03 gmd03 gjm15 grm15 gmd15 lll15 0.37 0.67 0.65 1.15 *nominal value (in mm) (in mm) 2.0 0.05 ?1.5 +0.1 - 0 a 3.5 0.05 4.0 0.1 2.0 0.1 8.0 0.3 1.75 0.1 0.5 max. (gjm03/grm03/gmd03) 0.8 max. (gjm15/grm15/gmd15 lll15/gnm0m) direction of feed b ?330mm reel 2.0 0.5 10 1.5 for 8mm wide tape 14 1.5 for 12mm wide tape ?330 2.0 ?50 min. ?13.0 0.5 ?21.0 0.8 continued on the following page. continued from the preceding page. ?180 +0 - 3.0 package 129 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information package ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
(3) dimensions of embossed tape 8mm width, 4mm pitch tape 12mm width, 8mm pitch tape a part number b grm21 (t u 1.0mm) lll21 lla21, llm21 grm31 (t u 1.15mm) lll31 lla31, llm31 gnm31 (t u 1.0mm) grm32 (t u 1.0mm) 1.45 0.2 2.8 0.2 1.9 0.2 2.25 0.2 3.5 0.2 lll18, llr18 lla18 1.05 0.1 1.85 0.1 gqm22 2.8* 3.5* 3.5 0.2 a* part number b* grm43 grm55 3.6 4.9 5.2 6.1 *nominal value *nominal value (in mm) 4.0 0.1 4.0 0.1 1.75 0.1 8.0 0.3 direction of feed a b 2.0 0.1 0.2 0.1 (ll p ) 0.25 0.1 (t v 2.0mm) 0.3 0.1 (t=2.5mm) 2.5 max. ?1.5 +0.1 -0 3.5 0.05 (3.0 max. for t=1.8/2.0mm) (3.7 max. for t u 2.5mm) 8.0 0.1 4.0 0.1 1.75 0.1 12.0 0.3 direction of feed 5.5 0.1 2.0 0.1 0.3 0.1 2.5 max. for grm43/55 (3.7 max. for t=2.5mm) (4.7 max. for t u 3.0mm) ?1.5 +0.1 -0 a b (4) taping method q tapes for capacitors are wound clockwise. the sprocket holes are to the right as the tape is pulled toward the user. w part of the leader and part of the empty tape should be attached to the end of the tape as follows. e the top tape and base tape are not attached at the end of the tape for a minimum of 5 pitches. r missing capacitors number within 0.1% of the number per reel or 1 pc, whichever is greater, and are not continuous. t the top tape and bottom tape should not protrude beyond the edges of the tape and should not cover sprocket holes. y cumulative tolerance of sprocket holes, 10 pitches: 0.3mm. u peeling off force: 0.1 to 0.6n* in the direction shown at right. 165 to 180? base tape top tape direction of feed 160 min. 190 min. 210 min. (top tape alone) (in mm) vacant section chip-mounting unit vacant section leader unit continued on the following page. continued from the preceding page. 4mm width, 1mm pitch tape a* part number b* grm02 0.23 0.43 *nominal value *grm02 grm03 gjm03 gmd03 } : 0.05 to 0.5n 2.0 0.04 ?.8 0.04 1.0 0.02 1.0 0.02 4.0 0.05 1.8 0.02 0.9 0.05 0.15 to 0.4 a b 0.5 max. package 130 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information package ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
n dimensions of bulk case packaging the bulk case uses antistatic materials. please contact murata for details. 6.8 8.8 12.0 2.0 3.0 1.5 110 (in mm) 36.0 31.5 continued from the preceding page. package 131 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information package ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
! caution 1. the performance of chip monolithic ceramic capacitors may be affected by the storage conditions. 1-1. store capacitors in the following conditions: temperature of +5 ? c to +40 ? c and a relative humidity of 20% to 70%. (1) sunlight, dust, rapid temperature changes, corrosive gas atmosphere or high temperature and humidity conditions during storage may affect the solderability and the packaging performance. please use product within six months of receipt. (2) please confirm solderability before using after six months. store the capacitors without opening the original bag. even if the storage period is short, do not exceed the specified atmospheric conditions. 1-2. corrosive gas can react with the termination (external) electrodes or lead wires of capacitors, and result in poor solderability. do not store the capacitors in an atmosphere consisting of corrosive gas (e.g., hydrogen sulfide, sulfur dioxide, chlorine, ammonia gas, etc.). 1-3. due to moisture condensation caused by rapid humidity changes, or the photochemical change caused by direct sunlight on the terminal electrodes and/or the resin/epoxy coatings, the solderability and electrical performance may deteriorate. do not store capacitors under direct sunlight or in high humidity conditions. n storage and operation conditions ! caution 132 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information ! caution ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
! caution n rating 1. temperature dependent characteristics 2. measurement of capacitance 1. the electrical characteristics of the capacitor can change with temperature. 1-1. for capacitors having larger temperature dependency, the capacitance may change with temperature changes. the following actions are recommended in order to ensure suitable capacitance values. (1) select a suitable capacitance for the operating temperature range. (2) the capacitance may change within the rated temperature. when you use a high dielectric constant type capacitor in a circuit that needs a tight (narrow) capacitance tolerance. (e. g., a time constant circuit), please carefully consider the characteristics of these capacitors, such as their aging, voltage, and temperature characteristics. and check capacitors using your actual appliances at the intended environment and operating conditions. 1. measure capacitance with the voltage and the frequency specified in the product specifications. 1-1. the output voltage of the measuring equipment may decrease occasionally when capacitance is high. please confirm whether a prescribed measured voltage is impressed to the capacitor. 1-2. the capacitance values of high dielectric constant type capacitors change depending on the ac voltage applied. please consider the ac voltage characteristics when selecting a capacitor to be used in an ac circuit. continued on the following page. -20 -15 -10 -5 0 5 10 15 20 -75 -50 -25 0 25 50 75 100 capacitance change (%) temperature ( ? c) typical temperature characteristics r6(x5r) capacitance change (%) temperature ( ? c) typical temperature characteristics f5(y5v) typical temperature characteristics r7(x7r) -20 -15 -10 -5 0 5 10 15 20 -75 -50 -25 0 25 50 75 100 125 150 capacitance change (%) temperature ( ? c) -100 -80 -60 -40 -20 0 20 40 -50 -25 0 25 50 75 100 ! caution 133 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information ! caution ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
! caution 3. applied voltage 4. applied voltage and self-heating temperature 1. do not apply a voltage to the capacitor that exceeds the rated voltage as called out in the specifications. 1-1. applied voltage between the terminals of a capacitor shall be less than or equal to the rated voltage. (1) when ac voltage is superimposed on dc voltage, the zero-to-peak voltage shall not exceed the rated dc voltage. when ac voltage or pulse voltage is applied, the peak-to-peak voltage shall not exceed the rated dc voltage. (2) abnormal voltages (surge voltage, static electricity, pulse voltage, etc.) shall not exceed the rated dc voltage. 1. when the capacitor is used in a high-frequency voltage, pulse voltage, application, be sure to take into account self-heating may be caused by resistant factors of the capacitor. 1-1. the load should be contained to the level such that when measuring at atmospheric temperature of 25 ? c, the product's self-heating remains below 20 ? c and surface temperature of the capacitor in the actual circuit remains within the maximum operating temperature. 1-2. influence of overvoltage overvoltage that is applied to the capacitor may result in an electrical short circuit caused by the breakdown of the internal dielectric layers. the time duration until breakdown depends on the applied voltage and the ambient temperature. continued on the following page. continued from the preceding page. typical voltage applied to the dc capacitor (e: maximum possible applied voltage.) dc voltage dc voltage+ac ac voltage pulse voltage e 0 e 0 e 0 e 0 ! caution 134 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information ! caution ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
! caution 5. dc voltage and ac voltage characteristics 1. the capacitance value of a high dielectric constant type capacitor changes depending on the dc voltage applied. please consider the dc voltage characteristics when a capacitor is selected for use in a dc circuit. 1-1. the capacitance of ceramic capacitors may change sharply depending on the applied voltage (see figure). please confirm the following in order to secure the capacitance. (1) whether the capacitance change caused by the applied voltage is within the range allowed or not. (2) in the dc voltage characteristics, the rate of capacitance change becomes larger as voltage increases, even if the applied voltage is below the rated voltage. when a high dielectric constant type capacitor is in a circuit that needs a tight (narrow) capacitance tolerance (e. g., a time constant circuit), please carefully consider the characteristics of these capacitors, such as their aging, voltage, and temperature characteristics. in addition, check capacitors using your actual appliances at the intended environment and operating conditions. 2. the capacitance values of high dielectric constant type capacitors change depending on the ac voltage applied. please consider the ac voltage characteristics when selecting a capacitor to be used in an ac circuit. continued on the following page. continued from the preceding page. -60 -50 -40 -30 -20 -10 0 10 20 30 0.0 0.5 1.0 1.5 2.0 2.5 ac voltage (vr.m.s.) 6. capacitance aging 1. the high dielectric constant type capacitors have the characteristic in which the capacitance value decreases with passage of time. when you use a high dielectric constant type capacitors in a circuit that needs a tight (narrow) capacitance tolerance (e. g., a time constant circuit), please carefully consider the characteristics of these capacitors, such as their aging, voltage, and temperature characteristics. in addition, check capacitors using your actual appliances at the intended environment and operating conditions. -100 -80 -60 -40 -20 0 20 01234567 dc voltage (vdc) [dc voltage characteristics] [ac voltage characteristics] capacitance change (%) capacitance change (%) -40 -30 -20 -10 0 10 20 10 100 1000 10000 5c r ? time (hr) capacitor change (%) ! caution 135 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information ! caution ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
! caution 7. vibration and shock 1. the capacitor's mechanical stress (vibration and shock) shall be specified for the use environment. please confirm the kind of vibration and/or shock, its condition, and any generation of resonance. please mount the capacitor so as not to generate resonance, and do not allow any impact on the terminals. 2. mechanical shock due to being dropped may cause damage or a crack in the dielectric material of the capacitor. do not use a dropped capacitor because the quality and reliability may be deteriorated. 3. when printed circuit boards are piled up or handled, the corners of another printed circuit board should not be allowed to hit the capacitor, in order to avoid a crack or other damage to the capacitor. continued from the preceding page. floor crack crack mounting printed circuit board ! caution 136 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information ! caution ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
! caution n soldering and mounting 1. confirm the best mounting position and direction that minimizes the stress imposed on the capacitor during flexing or bending the printed circuit board. 1-1. choose a mounting position that minimizes the stress imposed on the chip during flexing or bending of the board. 1. mounting position locate chip horizontal to the direction in which stress acts. chip arrangement worst a-c-(b~d) best [component direction] [chip mounting close to board separation point] a b d c perforation slit 2. information before mounting 1. do not reuse capacitors that were removed from the equipment. 2. confirm capacitance characteristics under actual applied voltage. 3. confirm the mechanical stress under actual process and equipment use. 4. confirm the rated capacitance, rated voltage and other electrical characteristics before assembly. 5. prior to use, confirm the solderability of capacitors that were in long-term storage. 6. prior to measuring capacitance, carry out a heat treatment for capacitors that were in long-term storage. 7. the use of sn-zn based solder will deteriorate the reliability of the mlcc. please contact our sales representative or product engineers on the use of sn-zn based solder in advance. continued on the following page. 3. maintenance of the mounting (pick and place) machine 1. make sure that the following excessive forces are not applied to the capacitors. 1-1. in mounting the capacitors on the printed circuit board, any bending force against them shall be kept to a minimum to prevent them from any bending damage or cracking. please take into account the following precautions and recommendations for use in your process. (1) adjust the lowest position of the pickup nozzle so as not to bend the printed circuit board. (2) adjust the nozzle pressure within a static load of 1n to 3n during mounting. 2. dirt particles and dust accumulated between the suction nozzle and the cylinder inner wall prevent the nozzle from moving smoothly. this imposes greater force upon the chip during mounting, causing cracked chips. also the locating claw, when worn out, imposes uneven forces on the chip when positioning, causing cracked chips. the suction nozzle and the locating claw must be maintained, checked and replaced periodically. board guide [correct] suction nozzle board support pin [incorrect] deflection ! caution 137 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information ! caution ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
! caution 4-1. reflow soldering 1. when sudden heat is applied to the components, the mechanical strength of the components will decrease because a sudden temperature change causes deformation inside the components. in order to prevent mechanical damage to the components, preheating is required for both the components and the pcb board. preheating conditions are shown in table 1. it is required to keep the temperature differential between the solder and the component's surface ( d t) as small as possible. 2. solderability of tin plating termination chips might be deteriorated when a low temperature soldering profile where the peak solder temperature is below the melting point of tin is used. please confirm the solderability of tin plated termination chips before use. 3. when components are immersed in solvent after mounting, be sure to maintain the temperature difference ( d t) between the component and the solvent within the range shown in the table 1. grm02/03/15/18/21/31 gjm03/15 lll15/18/21/31 llr18 gqm18/21 grm32/43/55 lla18/21/31 llm21/31 gnm gqm22 ? t v 190 ? c ? t v 130 ? c part number temperature differential table 1 recommended conditions [standard conditions for reflow soldering] [allowable reflow soldering temperature and time] in a case of repeated soldering, the accumulated soldering time must be within the range shown above. soldering time (sec.) 260 270 280 250 240 230 220 0 30 60 90 120 soldering temperature ( d ) inverting the pcb make sure not to impose any abnormal mechanical shocks to the pcb. continued from the preceding page. continued on the following page. peak temperature atmosphere pb-sn solder infrared reflow 230 to 250 ? c air vapor reflow 230 to 240 ? c air lead free solder 240 to 260 ? c air or n 2 infrared reflow vapor reflow 60-120 seconds 30-60 seconds d t gradual cooling soldering preheating 200 ? c 170 ? c 150 ? c 130 ? c time temperature ( d ) peak temperature 60-120 seconds 20 seconds max. d t gradual cooling soldering preheating 170 ? c 150 ? c 130 ? c time temperature ( d ) peak temperature pb-sn solder: sn-37pb lead free solder: sn-3.0ag-0.5cu 4. optimum solder amount for reflow soldering 4-1. overly thick application of solder paste results in a excessive solder fillet height. this makes the chip more susceptible to mechanical and thermal stress on the board and may cause the chips to crack. 4-2. too little solder paste results in a lack of adhesive strength on the outer electrode, which may result in chips breaking loose from the pcb. 4-3. make sure the solder has been applied smoothly to the end surface to a height of 0.2mm* min. 0.2mm * min. * grm02/03: 1/3 of chip thickness min. in section ! caution 138 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information ! caution ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
! caution 5. optimum solder amount for flow soldering 5-1. the top of the solder fillet should be lower than the thickness of components. if the solder amount is excessive, the risk of cracking is higher during board bending or any other stressful condition. grm18/21/31 lll21/31 gqm18/21 ? t v 150 ? c part number temperature differential table 2 [standard conditions for flow soldering] [allowable flow soldering temperature and time] in a case of repeated soldering, the accumulated soldering time must be within the range shown above. soldering time (sec.) 260 270 280 250 240 230 220 010203040 soldering temperature ( d ) up to chip thickness adhesive continued from the preceding page. continued on the following page. recommended conditions soldering peak temperature atmosphere pb-sn solder 240 to 250 ? c air lead free solder 250 to 260 ? c preheating peak temperature 90 to 110 ? c 100 to 120 ? c n 2 30-90 seconds 5 seconds max. d t gradual cooling soldering preheating preheating peak temperature time temperature ( d ) soldering peak temperature pb-sn solder: sn-37pb lead free solder: sn-3.0ag-0.5cu 4-2. flow soldering 1. when sudden heat is applied to the components, the mechanical strength of the components will decrease because a sudden temperature change causes deformation inside the components. in order to prevent mechanical damage in the components, preheating should be required for both of the components and the pcb board. preheating conditions are shown in table 2. it is required to keep the temperature differential between the solder and the component's surface ( d t) as small as possible. 2. excessively long soldering time or high soldering temperature can result in leaching of the outer electrodes, causing poor adhesion or a reduction in capacitance value due to loss of contact between electrodes and end termination. 3. when components are immersed in solvent after mounting, be sure to maintain the temperature difference ( d t) between the component and solvent within the range shown in the table 2. 4. do not apply flow soldering to chips not listed in table 2. in section ! caution 139 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information ! caution ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
! caution solder amount in section 4-3. correction with a soldering iron 1. when sudden heat is applied to the components when using a soldering iron, the mechanical strength of the components will decrease because the extreme temperature change can cause deformations inside the components. in order to prevent mechanical damage to the components, preheating is required for both the components and the pcb board. preheating conditions, (the "temperature of the soldering iron tip", "preheating temperature," "temperature differential" between the iron tip and the components and the pcb), should be within the conditions of table 3. it is required to keep the temperature differential between the soldering iron and the component surfaces ( d t) as small as possible. 2. after soldering, do not allow the component/pcb to rapidly cool down. 3. the operating time for the re-working should be as short as possible. when re-working time is too long, it may cause solder leaching, in turn causing a reduction in the adhesive strength of the terminations. 4. optimum solder amount when re-working with a soldering lron 4-1. for sizes smaller than 0603, (grm03/15/18, gjm03/15, gqm18), the top of the solder fillet should be lower than 2/3's of the thickness of the component or 0.5mm whichever is smaller. for 0805 and larger sizes, (grm21/31/32/43/55, gqm21/22), the top of the solder fillet should be lower than 2/3's of the thickness of the component. if the solder amount is excessive, the risk of cracking is higher during board bending or under any other stressful condition. 4-2. a soldering iron with a tip of ?3mm or smaller should be used. it is also necessary to keep the soldering iron from touching the components during the re-work. 4-3. solder wire with ?0.5mm or smaller is required for soldering. grm03/15/18/21/31 gjm03/15 gqm18/21 grm32/43/55 gqm22 ? t v 190 ? c ? t v 130 ? c part number temperature differential ( d t) table 3 continued from the preceding page. 4-4. leaded component insertion 1. if the pcb is flexed when leaded components (such as transformers and ics) are being mounted, chips may crack and solder joints may break. before mounting leaded components, support the pcb using backup pins or special jigs to prevent warping. 5. washing excessive ultrasonic oscillation during cleaning can cause the pcbs to resonate, resulting in cracked chips or broken solder joints. take note not to vibrate pcbs. air air atmosphere 350 ? c max. 280 ? c max. temperature of soldering iron tip 150 ? c min. 150 ? c min. preheating temperature *applicable for both pb-sn and lead free solder. pb-sn solder: sn-37pb lead free solder: sn-3.0ag-0.5cu continued on the following page. ! caution 140 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information ! caution ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
! caution 6. electrical test on printed circuit board 1. confirm position of the support pin or specific jig, when inspecting the electrical performance of a capacitor after mounting on the printed circuit board. 1-1. avoid bending printed circuit board by the pressure of a test pin, etc. the thrusting force of the test probe can flex the pcb, resulting in cracked chips or open solder joints. provide support pins on the back side of the pcb to prevent warping or flexing. 1-2. avoid vibration of the board by shock when a test pin contacts a printed circuit board. 7. printed circuit board cropping 1. after mounting a capacitor on a printed circuit board, do not apply any stress to the capacitor that is caused by bending or twisting the board. 1-1. in cropping the board, the stress as shown right may cause the capacitor to crack. try not to apply this type of stress to a capacitor. 2. ascertain of the cropping method for the printed circuit board in advance. 2-1. printed circuit board cropping shall be carried out by using a jig or an apparatus to prevent the mechanical stress that can occur to the board. (1) example of a suitable jig recommended example: the board should be pushed as close to the cropping jig as possible and from the back side of board in order to minimize the compressive stress applied to capacitor. not recommended example: when the board is pushed at a point far from the cropping jig and from the front side of board as below, the capacitor may form a crack caused by the tensile stress applied to capacitor. continued from the preceding page. continued on the following page. [not recommended] [recommended] peeling test-pin support pin test-pin [bending] [twisting] [outline of jig] load point load point board cropping jig v-groove printed circuit board components components printed circuit board direction of load direction of load printed circuit board not recommended recommended ! caution 141 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information ! caution ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
! caution (2) example of a suitable machine an outline of a printed circuit board cropping machine is shown as follows. along the lines with the v-grooves on the printed circuit board, the top and bottom blades are aligned to one another when cropping the board. the misalignment of the position between top and bottom blades may cause the capacitor to crack. continued from the preceding page. v-groove printed circuit board [outline of machine] [principle of operation] [cross-section diagram] top blade top blade bottom blade bottom blade top blade bottom blade top blade bottom blade top blade bottom blade top blade printed circuit board v-groove recommended not recommended top-bottom misalignment left-right misalignment front-rear misalignment ! caution 142 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information ! caution ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
! caution 1. under operation of equipment 1-1. do not touch a capacitor directly with bare hands during operation in order to avoid the danger of an electric shock. 1-2. do not allow the terminals of a capacitor to come in contact with any conductive objects (short-circuit). do not expose a capacitor to a conductive liquid, including any acid or alkali solutions. 1-3. confirm the environment in which the equipment will operate is under the specified conditions. do not use the equipment under the following environments. (1) being spattered with water or oil. (2) being exposed to direct sunlight. (3) being exposed to ozone, ultraviolet rays or radiation. (4) being exposed to toxic gas (e.g., hydrogen sulfide, sulfur dioxide, chlorine, ammonia gas, etc.) (5) any vibrations or mechanical shocks exceeding the specified limits. (6) moisture condensing environments. 1-4. use damp proof countermeasures if using under any conditions that can cause condensation. 2. others 2-1. in an emergency (1) if the equipment should generate smoke, fire or smell, immediately turn off or unplug the equipment. if the equipment is not turned off or unplugged, the hazards may be worsened by supplying continuous power. (2) in this type of situation, do not allow face and hands to come in contact with the capacitor or burns may be caused by the capacitor's high temperature. 2-2. disposal of waste when capacitors are disposed, they must be burned or buried by an industrial waste vendor with the appropriate licenses. 2-3. circuit design grm, gcm, gma/d, lll/a/m, gqm, gjm, gnm series capacitors in this catalog are not safety certified products. 2-4. remarks failure to follow the cautions may result, worst case, in a short circuit and smoking when the product is used. the above notices are for standard applications and conditions. contact us when the products are used in special mounting conditions. select optimum conditions for operation as they determine the reliability of the product after assembly. the data herein are given in typical values, not guaranteed ratings. n others ! caution 143 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information ! caution ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
notice 1. operating temperature 1. the operating temperature limit depends on the capacitor. 1-1. do not apply temperatures exceeding the upper operating temperature. it is necessary to select a capacitor with a suitable rated temperature that will cover the operating temperature range. also it is necessary to consider the temperature distribution in equipment and the seasonal temperature variable factor. 1-2. consider the self-heating of the capacitor. the surface temperature of the capacitor shall be the upper operating temperature or less when including the self-heating factors. 2. atmosphere surroundings (gaseous and liquid) 1. restriction on the operating environment of capacitors. 1-1. capacitors, when used in the above, unsuitable, operating environments may deteriorate due to the corrosion of the terminations and the penetration of moisture into the capacitor. 1-2. the same phenomenon as the above may occur when the electrodes or terminals of the capacitor are subject to moisture condensation. 1-3. the deterioration of characteristics and insulation resistance due to the oxidization or corrosion of terminal electrodes may result in breakdown when the capacitor is exposed to corrosive or volatile gases or solvents for long periods of time. 3. piezo-electric phenomenon 1. when using high dielectric constant type capacitors in ac or pulse circuits, the capacitor itself vibrates at specific frequencies and noise may be generated. moreover, when the mechanical vibration or shock is added to the capacitor, noise may occur. n rating notice 144 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information notice ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
notice n soldering and mounting 1. pcb design 1. notice for pattern forms 1-1. unlike leaded components, chip components are susceptible to flexing stresses since they are mounted directly on the substrate. they are also more sensitive to mechanical and thermal stresses than leaded components. excess solder fillet height can multiply these stresses and cause chip cracking. when designing substrates, take land patterns and dimensions into consideration to eliminate the possibility of excess solder fillet height. 1-2. it is possible for the chip to crack by the expansion and shrinkage of a metal board. please contact us if you want to use our ceramic capacitors on a metal board such as aluminum. chassis solder (ground) electrode pattern solder resist solder resist solder resist lead wire soldering iron lead wire solder resist continued on the following page. pattern forms placing close to chassis placing of chip components and leaded components placing of leaded components after chip component lateral mounting prohibited correct notice 145 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information notice ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
notice grm18 gqm18 grm21 gqm21 grm31 lll21 lll31 1.6 g 0.8 2.0 g 1.25 3.2 g 1.6 1.25 g 2.0 1.6 g 3.2 0.6 to 1.0 1.0 to 1.2 2.2 to 2.6 0.4 to 0.7 0.6 to 1.0 0.8 to 0.9 0.9 to 1.0 1.0 to 1.1 0.5 to 0.7 0.8 to 0.9 0.6 to 0.8 0.8 to 1.1 1.0 to 1.4 1.4 to 1.8 2.6 to 2.8 (in mm) part number dimensions chip (l g w)abc table 1 flow soldering method grm02 grm03 gjm03 grm15 gjm15 grm18 gqm18 grm21 gqm21 grm31 grm32 grm43 grm55 lll15 lll18 llr18 lll21 lll31 gqm22 0.4 g 0.2 0.6 g 0.3 1.0 g 0.5 1.6 g 0.8 2.0 g 1.25 3.2 g 1.6 3.2 g 2.5 4.5 g 3.2 5.7 g 5.0 0.5 g 1.0 0.8 g 1.6 1.25 g 2.0 1.6 g 3.2 3.2 g 2.5 0.16 to 0.2 0.2 to 0.3 0.3 to 0.5 0.6 to 0.8 1.0 to 1.2 2.2 to 2.4 2.0 to 2.4 3.0 to 3.5 4.0 to 4.6 0.15 to 0.2 0.2 to 0.3 0.4 to 0.6 0.6 to 0.8 2.2 to 2.5 0.12 to 0.18 0.2 to 0.35 0.35 to 0.45 0.6 to 0.7 0.6 to 0.7 0.8 to 0.9 1.0 to 1.2 1.2 to 1.4 1.4 to 1.6 0.2 to 0.25 0.3 to 0.4 0.4 to 0.5 0.6 to 0.7 0.8 to 1.0 0.2 to 0.23 0.2 to 0.4 0.4 to 0.6 0.6 to 0.8 0.8 to 1.1 1.0 to 1.4 1.8 to 2.3 2.3 to 3.0 3.5 to 4.8 0.7 to 1.0 1.4 to 1.6 1.4 to 1.8 2.6 to 2.8 1.9 to 2.3 (in mm) part number dimensions chip (l g w)abc table 2 reflow soldering method chip capacitor continued from the preceding page. continued on the following page. 2. land dimensions 2-1. a chip capacitor can be cracked due to the stress of pcb bending / etc if the land area is larger than needed and has an excess amount of solder. please refer to the land dimensions in table 1 for flow soldering, table 2 for reflow soldering, table 3 for gnm & lla, and table 4 for llm. please confirm the suitable land dimension by evaluating the actual set / pcb. solder resist a b c land notice 146 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information notice ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
notice gnm0m2 gnm1m2 gnm212 gnm214 gnm314 lla18 lla21 lla31 0.9 1.37 2.0 2.0 3.2 1.6 2.0 3.2 0.6 1.0 1.25 1.25 1.6 0.8 1.25 1.6 0.12 to 0.20* 0.4 to 0.5 0.6 to 0.7 0.6 to 0.7 0.8 to 1.0 0.3 to 0.4 0.5 to 0.7 0.7 to 0.9 0.35 to 0.40* 0.35 to 0.45 0.5 to 0.7 0.5 to 0.7 0.7 to 0.9 0.25 to 0.35 0.35 to 0.6 0.4 to 0.7 0.3 0.3 to 0.35 0.4 to 0.5 0.25 to 0.35 0.3 to 0.4 0.15 to 0.25 0.2 to 0.3 0.3 to 0.4 0.45 0.64 1.0 0.5 0.8 0.4 0.5 0.8 part number lwabcp dimensions (mm) table 3 gnm, lla series for reflow soldering land dimensions a land chip capacitor chip capacitor b cp continued from the preceding page. 2. adhesive application 1. thin or insufficient adhesive can cause the chips to loosen or become disconnected during flow soldering. the amount of adhesive must be more than dimension c, shown in the drawing at right, to obtain the correct bonding strength. the chip's electrode thickness and land thickness must also be taken into consideration. 2. low viscosity adhesive can cause chips to slip after mounting. the adhesive must have a viscosity of 5000pa s (500ps) min. (at 25 ? c). 3. adhesive coverage land adhesive board chip capacitor a b c c=50 to 105 m b=30 to 35 m a=20 to 70 m continued on the following page. grm18, gqm18 grm21, lll21, gqm21 grm31, lll31 0.05mg min. 0.1mg min. 0.15mg min. part number adhesive coverage* *nominal value a chip capacitor b c p land gnm pp 2 gnm pp 4 lla llm21 llm31 0.3 0.4 part number c, c' (0.3 to 0.5) (0.3 to 0.5) b, b' 1.3 to 1.8 1.6 to 2.0 e 2.0 to 2.6 3.2 to 3.6 d 0.6 to 0.8 1.0 a 1.4 to 1.6 2.6 f 0.5 0.8 p dimensions (mm) table 4 llm series for reflow soldering land dimensions llm b=(c-e)/2, b'=(d-f)/2 b b' f d p c c' a e * 0.82 v a+2b v 1.00 notice 147 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information notice ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
notice 1. please evaluate a capacitor by actual cleaning equipment and conditions to confirm the quality and select the applicable solvent. 2. unsuitable cleaning solvent may leave residual flux or other foreign substances, causing deterioration of electrical characteristics and the reliability of the capacitors. 3. select the proper cleaning conditions. 3-1. improper cleaning conditions (excessive or insufficient) may result in the deterioration of the performance of the capacitors. 6. washing continued from the preceding page. 4. flux application 1. an excessive amount of flux generates a large quantity of flux gas, which can cause a deterioration of solderability. therefore apply flux thinly and evenly throughout. (a foaming system is generally used for flow soldering.) 2. flux containing too high a percentage of halide may cause corrosion of the outer electrodes unless there is sufficient cleaning. use flux with a halide content of 0.2% max. 3. do not use strong acidic flux. 4. do not use water-soluble *flux. (*water-soluble flux can be defined as non rosin type flux including wash-type flux and non-wash-type flux.) 3. adhesive curing 1. insufficient curing of the adhesive can cause chips to disconnect during flow soldering and deterioration in the insulation resistance between the outer electrodes due to moisture absorption. control curing temperature and time in order to prevent insufficient hardening. continued on the following page. o set temperature and time to ensure that leaching of the outer electrode does not exceed 25% of the chip end area as a single chip (full length of the edge a-b-c-d shown right) and 25% of the length a-b shown below as mounted on substrate. [as a single chip] [as mounted on substrate] 5. flow soldering a b c d outer electrode a b notice 148 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information notice ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
notice 1. a crack may be caused in the capacitor due to the stress of the thermal contraction of the resin during curing process. the stress is affected by the amount of resin and curing contraction. select a resin with small curing contraction. the difference in the thermal expansion coefficient between a coating resin or a molding resin and the capacitor may cause the destruction and deterioration of the capacitor such as a crack or peeling, and lead to the deterioration of insulation resistance or dielectric breakdown. select a resin for which the thermal expansion coefficient is as close to that of capacitor as possible. a silicone resin can be used as an under-coating to buffer against the stress. 2. select a resin that is less hygroscopic. using hygroscopic resins under high humidity conditions may cause the deterioration of the insulation resistance of a capacitor. an epoxy resin can be used as a less hygroscopic resin. 7. coating 1. die bonding of capacitors use the following materials for the brazing alloys: au-sn (80/20) 300 to 320 ? c in n 2 atmosphere mounting (1) control the temperature of the substrate so it matches the temperature of the brazing alloy. (2) place the brazing alloy on the substrate and place the capacitor on the alloy. hold the capacitor and gently apply the load. be sure to complete the operation within 1 minute. 2. wire bonding wire gold wire: 25 micro m (0.001 inch) diameter bonding (1) thermo compression, ultrasonic ball bonding. (2) required stage temperature: 150 to 200 ? c (3) required wedge or capillary weight: 0.2n to 0.5n (4) bond the capacitor and base substrate or other devices with gold wire. 8. die bonding/wire bonding (gma or gmd series) continued from the preceding page. notice 149 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information notice ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
notice 1. transportation 1. the performance of a capacitor may be affected by the conditions during transportation. 1-1. the capacitors shall be protected against excessive temperature, humidity and mechanical force during transportation. (1) climatic condition low air temperature: -40 ? c change of temperature air/air: -25 ? c/+25 ? c low air pressure: 30 kpa change of air pressure: 6 kpa/min. (2) mechanical condition transportation shall be done in such a way that the boxes are not deformed and forces are not directly passed on to the inner packaging. 1-2. do not apply excessive vibration, shock, and pressure to the capacitor. (1) when excessive mechanical shock or pressure is applied to a capacitor, chipping or cracking may occur in the ceramic body of the capacitor. (2) when the sharp edge of an air driver, a soldering iron, tweezers, a chassis, etc. impacts strongly on the surface of capacitor, the capacitor may crack and short-circuit. 1-3. do not use a capacitor to which excessive shock was applied by dropping, etc. the capacitor dropped accidentally during processing may be damaged. n others notice 150 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information notice ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
1 grm21 for flow/reflow soldering 95 to 100% 95 to 100% 95% 90 to 95% 95% 1. solderability (1) test method subject the chip capacitor to the following conditions. then apply flux (an ethanol solution of 25% rosin) to the chip and dip it in 230 d eutectic solder for 2 seconds. conditions: expose prepared at room temperature (for 6 months and 12 months, respectively) prepared at high temperature (for 100 hours at 85 d ) prepared left at high humidity (for 100 hours under 90%rh to 95%rh at 40 d ) (2) test samples grm21 : products for flow/reflow soldering. (3) acceptance criteria with a 60-power optical microscope, measure the surface area of the outer electrode that is covered with solder. (4) results refer to table 1. sample initial state prepared at room temperature 6 months 12 months prepared at high humidity for 100 hours at 90 to 95% rh and 40 d prepared at high temperature for 100 hours at 85 d table 1 2. board bending strength for solder fillet height (1) test method solder the chip capacitor to the test pcb with the amount of solder paste necessary to achieve the fillet heights. then bend the pcb using the method illustrated and measure capacitance. (2) test samples grm21: 5c/r7/f5 characteristics t=0.6mm (3) acceptance criteria products should be determined to be defective if the change in capacitance has exceeded the values specified in table 2. characteristics change in capacitance 5c within t 5% or t 0.5pf, whichever is greater within t 12.5% within t 20% r7 f5 table 2 capacitor supporting base 45 45 capacitance meter flexure 20 50 r230 pressurizing speed: 1.0mm/sec. note : the material of pressure application jig and support is the quenched metal. (hardness hb 183 - 255 or superhardness hra90 or more) solder amount larger fillet. fillet up to chip thickness pressurize
q s s t t u vv w x yy zz [ \ ] ^ _ ` ` | ? aa ?? ? - ? q r ss tt u v ww x y y z z \ ] ] ^ _ ` | ? a a ? ? - ? ?
v y z [ ^ a ? ? material : glass epoxy : copper foil (0.35mm thick) : solder resist 100 4.0 40 1.6 1.0 1.65 1.2 (in mm) continued on the following page. reference data 151 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information reference data ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
(4) results grm21 5c (t=0.6) grm21 r7 (t=0.6) grm21 f5 (t=0.6) 3. temperature cycling for solder fillet height (1) test method solder the chips to the substrate of various test fixtures using sufficient amounts of solder to achieve the required fillet height. then subject the fixtures to the cycle illustrated at right 200 times. q solder amount alumina substrates are typically designed for reflow soldering. glass epoxy or paper phenol substrates are typically used for flow soldering. w material alumina (thickness: 0.64mm) glass epoxy (thickness: 1.64mm) paper phenol (thickness: 1.64mm) e land dimension solder amount q w e alumina substrate solder to be used glass epoxy or paper phenol 0.5t 0.7t t t 1.3t 1.6t 6 z 4 eutectic solder [solder amount] 0 20 40 60 80 100 02468 flexure (mm) 0 20 40 60 80 100 02468 0 20 40 60 80 100 02468 survival rate (%) flexure (mm) survival rate (%) flexure (mm) survival rate (%)
q r ss tu v w xx y y z [ \] ^ ^ _ ` | ?? a a ? ? -? larger fillet

qq r s tt u u v v w x y z z [ [ \] ^ __ `` | | ? a ? ? ? ? -?
q rr ss tu v w w x x y y z [ \ \ ]] ^^ _ ` | ? ? a a ? ? - - ?? fillet up to chip thickness larger fillet larger fillet fillet up to chip thickness fillet up to chip thickness [temperature cycling] +125 d room temperature - 55 d time (min.) 30 5 30 5 ag/pd=72/28 thickness: 10 to 12 m cu thickness: 35 m alumina substrate glass epoxy substrate paper phenol substrate [land dimension] 1.5 1.5 1.2 1.5 land pattern continued from the preceding page. continued on the following page. (in mm) reference data 152 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information reference data ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
(4) results (2) test samples grm21 5c/r7/f5 characteristics t=0.6mm (3) acceptance criteria products are determined to be defective if the change in capacitance has exceeded the values specified in table 3. characteristics change in capacitance 5c within t 2.5% or t 0.25pf, whichever is greater within t 7.5% within t 20% r7 f5 table 3 alumina substrate (thickness 0.64mm) glass epoxy substrate (thickness 1.6mm) paper phenol substrate (thickness 1.6mm) grm21 5c (t=0.6) qw e 100 80 60 40 20 0 0 50 100 150 200 number of cycles accumulated per- cent defective (%) grm21 r7 (t=0.6) q w e 100 80 60 40 20 0 0 50 100 150 200 number of cycles accumulated per- cent defective (%) grm21 f5 (t=0.6) q w e 100 80 60 40 20 0 0 50 100 150 200 number of cycles accumulated per- cent defective (%) grm21 r7 (t=0.6) qw e 100 80 60 40 20 0 0 50 100 150 200 number of cycles accumulated per- cent defective (%) grm21 f5 (t=0.6) qw e 100 80 60 40 20 0 0 50 100 150 200 number of cycles accumulated per- cent defective (%) grm21 5c (t=0.6) qwe 100 80 60 40 20 0 0 50 100 150 200 number of cycles accumulated per- cent defective (%) grm21 5c (t=0.6) qw 100 80 60 40 20 0 0 50 100 150 200 number of cycles accumulated per- cent defective (%) e grm21 r7 (t=0.6) qw 100 80 60 40 20 0 0 50 100 150 200 number of cycles accumulated per- cent defective (%) e grm21 f5 (t=0.6) qw 100 80 60 40 20 0 0 50 100 150 200 number of cycles accumulated per- cent defective (%) e continued from the preceding page. continued on the following page. reference data 153 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information reference data ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
4. board bending strength for board material (1) test method solder the chip to the test board. then bend the board using the method illustrated below, to measure capacitance. (2) test samples grm21 5c/r7/f5 characteristics t=0.6mm typical (3) acceptance criteria products should be determined to be defective if the change in capacitance has exceeded the values specified in table 4. (4) results 5c r7 f5 table 4 grm21 5c (t=0.6) grm21 r7 (t=0.6) grm21 f5 (t=0.6) capacitor supporting base 45 45 capacitance meter flexure 20 50 r230 pressurizing speed: 1.0mm/sec. note : material of the pressurizing jig and the supporting base must be hardened steel (hardness : hb183 to 255 or carbide hardness : hra90 min.) solder amount (in mm) up to chip thickness pressurize
q r r s t uu v w xx y z [ \\ ] ^ ^ _ _ || ?? a ? ? -- ?

qq rr s t u v w x x y [ [ \ \ ] ^^ _ ` | ? ? a ? ? - - ? u xy \ | ?a - : copper foil (0.035mm thick) : solder resist 100 4.0 40 1.6 1.0 1.65 1.2 characteristics change in capacitance within t 5% or t 0.5pf, whichever is greater within t 12.5% within t 20% 0 20 40 60 80 100 02468 flexure (mm) 0 20 40 60 80 100 02468 0 20 40 60 80 100 02468 survival rate (%) flexure (mm) survival rate (%) flexure (mm) survival rate (%)
q q r r s t t u u v ww xx y zz [[ \\ ] ] ^ ^ __ ` | | ?? a ?? ?? -- ? ?
q q r r s s tt t uu u v v ww xx yy z zz [[ \\ ] ] ^ ^ _ __ `` || | ?? aa ? ?? ?? -- ? ?

qq rr s s t t uu vv ww x yy zz [ [ \ \ ] ] ^ ^ _ _ ` ` || ? aa ?? ? ? - - ? ? paper phenol glass epoxy glass epoxy paper phenol paper phenol glass epoxy continued from the preceding page. continued on the following page. reference data 154 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information reference data ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
5. break strength (1) test method place the chip on a steel plate as illustrated on the right. increase load applied to a point near the center of the test sample. (2) test samples grm21 5c/r7/f5 characteristics grm31 5c/r7/f5 characteristics (3) acceptance criteria define the load that has caused the chip to break or crack, as the bending force. (4) explanation break strength, p, is proportionate to the square of the thickness of the ceramic element and is expressed as a curve of secondary degree. the formula is: w : width of ceramic element (mm) t : thickness of element (mm) l : distance between fulcrums (mm) g : bending stress (n/mm 2 ) (5) results chip size lw 5c charac- teristics r7 charac- teristics g f5 charac- teristics grm21 2.7 1.5 1.5 1.2 300 180 160 grm31 p= (n) 2 g wt 2 3l w t l (in mm) grm21 grm31 6. thermal shock (1) test method after applying flux (an ethanol solution of 25% rosin), dip the chip in a solder bath (6 z 4 eutectic solder) in accordance with the following conditions: (2) test samples grm21 5c/r7/f5 characteristics t=0.6mm typical (3) acceptance criteria visually inspect the test sample with a 60-power optical microscope. chips exhibiting breaks or cracks should be determined to be defective. q r s tu w x y z \ ] ^ _ ` | ? a ? - ? storage scope amplifier load cell sample steel plate p pressurizing speed: 2.5mm/sec. loading jig end f 1.0mm p0.5mm 0 20 40 60 80 100 120 140 r7 f5 0 0.4 0.8 1.2 1.6 thickness of ceramic element (mm) bending-break strength (n) 5c f5 r7 5c 0 20 40 60 80 100 120 140 0 0.4 0.8 1.2 1.6 thickness of ceramic element (mm) bending-break strength (n) \ ` - u y | a q r u ] ^ | ? q ] ? dipping speed: 25mm/sec. chip capacitor solder bath solder temperature natural cooling 2 sec. time 25 d d t temperature continued from the preceding page. continued on the following page. reference data 155 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information reference data ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
7. solder heat resistance (1) test method q reflow soldering: apply about 300 m of solder paste over the alumina substrate. after reflow soldering, remove the chip and check for leaching that may have occurred on the outer electrode. w flow soldering: after dipping the test sample with a pair of tweezers in wave solder (eutectic solder), check for leaching that may have occurred on the outer electrode. (2) test samples grm21: for flow/reflow soldering t=0.6mm (3) acceptance criteria the starting time of leaching should be defined as the time when the outer electrode has lost 25% of the total edge length of a-b-c-d as illustrated: e dip soldering: after dipping the test sample with a pair of tweezers in static solder (eutectic solder), check for leaching that may have occurred on the outer electrode. r flux to be used: an ethanol solution of 25% rosin. (4) results (4) results reflow soldering dip soldering flow soldering 0 20 40 60 80 100 200 240 280 320 360 temperature differential d t ( d ) incidence of cracks (%) f5 r7 5c a b c d outer electrode 280 270 260 250 240 230 220 210 0 leaching starting time (sec.) 280 270 260 250 240 230 220 210 0 102030405060 280 270 260 250 240 230 220 210 0 102030405060 60 120 180 240 soldering temperature ( d ) leaching starting time (sec.) soldering temperature ( d ) leaching starting time (sec.) soldering temperature ( d ) continued from the preceding page. continued on the following page. reference data 156 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information reference data ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
8. thermal shock when making corrections with a soldering iron (1) test method apply a soldering iron meeting the conditions below to the soldered joint of a chip that has been soldered to a paper phenol board, while supplying wire solder. (note: the soldering iron tip should not directly touch the ceramic element of the chip.) (2) test samples grm21 5c/r7/f5 characteristics t=0.6mm (3) acceptance criteria for defects observe the appearance of the test sample with a 60-power optical microscope. those units displaying any breaks or cracks are determined to be defective. (4) results soldering iron tip diameter ceramic heater 20w ?3mm grm21 5c (t=0.6) grm21 r7 (t=0.6) grm21 f5 (t=0.6) mounting solder paper phenol substrate wire solder soldering lron duration of touching : approx. 3 sec. 100 200 soldering iron tip temperature ( d ) 80 60 40 20 0 240 280 320 360 100 200 80 60 40 20 0 240 280 320 360 100 200 80 60 40 20 0 240 280 320 360 incidence of cracks (%) soldering iron tip temperature ( d ) incidence of cracks (%) soldering iron tip temperature ( d ) incidence of cracks (%) continued from the preceding page. reference data 157 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. for general grm series array gnm series low esl ll p series high-q gjm series high frequency gqm series monolithic microchip gma series for bonding gmd series product information reference data ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
for general purpose grm/grj series 1-1 low dissipation factor grm series 160 specifications and test methods 164 1-2 high capacitance for general use grm series 166 specifications and test methods 168 1-3 soft termination type grj series 171 specifications and test methods 173 only for applications 2-1 for lcd backlight inverter circuit grm/dc3.15kv series 176 specifications and test methods 177 2-2 for information devices gr4 series 179 specifications and test methods 180 2-3 for camera flash circuit gr7 series 183 specifications and test methods 184 ac250v type (which meet japanese law) ga2 series 187 specifications and test methods 188 safety standard certified ga3 series 4-1 ul, iec60384-14 class x1/y2 type gc 191 4-2 iec60384-14 class y2, x1/y2 type gf 192 4-3 iec60384-14 class y3 type gd 194 4-4 iec60384-14 class x2 type gb 195 specifications and test methods 196 reference data (typical example) 200 package 203 ! caution 206 notice 214 chip monolithic ceramic capacitors (medium voltage) 1 2 3 4 ! note ?please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. ?this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. for general purpose grm/grj series only for applications ac250v type ga2 series safety standard certified ga3 series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
for general purpose grm/grj series only for applications ac250v type ga2 series safety standard certified ga3 series product information 160 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. chip monolithic ceramic capacitors (medium voltage) low dissipation factor grm series n features 1. low-loss and suitable for high frequency circuits 2. murata's original internal electrode structure provides high flash-over voltage. 3. a new monolithic structure for small, surface- mountable devices capable of operating at high voltage levels 4. sn-plated external electrodes provides good solderability. 5. use the grm21/31 type with flow or reflow soldering, and other types with reflow soldering only. n applications ideal for use on high frequency pulse circuits such as snubber circuits for switching power supplies, dc-dc converters, ballasts (inverter fluorescent lamps), etc. do not use these products in any automotive power train or safety equipment including battery chargers for electric vehicles and plug-in hybrids. only murata products clearly stipulated as "for automotive use" can be used for automobile applications such as power train and safety equipment. part number lw t dimensions (mm) e min. g min. 1.5* 0.7 1.6 0.2 2.5 0.2 2.0 0.2 0.3 2.9 grm32a grm32b grm42a grm31b grm31a grm21b grm21a 3.2 0.2 1.25 0.2 2.0 0.2 3.2 0.2 4.5 0.3 * grm31a7u3d, grm32a7u3d, grm32b7u3d: 1.8mm min. l t w e e g 1.0 +0,- 0.3 1.25 0.2 1.0 +0,- 0.3 1.0 +0,- 0.3 1.0 +0,- 0.3 1.25 +0,- 0.3 1.25 +0,- 0.3 c0g characteristics part number rated voltage (v) tc code (standard) capacitance (pf) length l (mm) width w (mm) thickness t (mm) electrode g min. (mm) electrode e (mm) grm21a5c2e100jw01d dc250 c0g (eia) 10 5% 2.0 1.25 1.0 0.7 0.3 min. grm21a5c2e120jw01d dc250 c0g (eia) 12 5% 2.0 1.25 1.0 0.7 0.3 min. grm21a5c2e150jw01d dc250 c0g (eia) 15 5% 2.0 1.25 1.0 0.7 0.3 min. grm21a5c2e180jw01d dc250 c0g (eia) 18 5% 2.0 1.25 1.0 0.7 0.3 min. grm21a5c2e220jw01d dc250 c0g (eia) 22 5% 2.0 1.25 1.0 0.7 0.3 min. grm21a5c2e270jw01d dc250 c0g (eia) 27 5% 2.0 1.25 1.0 0.7 0.3 min. grm21a5c2e330jw01d dc250 c0g (eia) 33 5% 2.0 1.25 1.0 0.7 0.3 min. grm21a5c2e390jw01d dc250 c0g (eia) 39 5% 2.0 1.25 1.0 0.7 0.3 min. grm21a5c2e470jw01d dc250 c0g (eia) 47 5% 2.0 1.25 1.0 0.7 0.3 min. grm21a5c2e560jw01d dc250 c0g (eia) 56 5% 2.0 1.25 1.0 0.7 0.3 min. grm21a5c2e680jw01d dc250 c0g (eia) 68 5% 2.0 1.25 1.0 0.7 0.3 min. grm21a5c2e820jw01d dc250 c0g (eia) 82 5% 2.0 1.25 1.0 0.7 0.3 min. grm21a5c2e101jw01d dc250 c0g (eia) 100 5% 2.0 1.25 1.0 0.7 0.3 min. grm31a5c2j100jw01d dc630 c0g (eia) 10 5% 3.2 1.6 1.0 1.5 0.3 min. grm31a5c2j120jw01d dc630 c0g (eia) 12 5% 3.2 1.6 1.0 1.5 0.3 min. grm31a5c2j150jw01d dc630 c0g (eia) 15 5% 3.2 1.6 1.0 1.5 0.3 min. grm31a5c2j180jw01d dc630 c0g (eia) 18 5% 3.2 1.6 1.0 1.5 0.3 min. grm31a5c2j220jw01d dc630 c0g (eia) 22 5% 3.2 1.6 1.0 1.5 0.3 min. grm31a5c2j270jw01d dc630 c0g (eia) 27 5% 3.2 1.6 1.0 1.5 0.3 min. grm31a5c2j330jw01d dc630 c0g (eia) 33 5% 3.2 1.6 1.0 1.5 0.3 min. grm31a5c2j390jw01d dc630 c0g (eia) 39 5% 3.2 1.6 1.0 1.5 0.3 min. grm31a5c2j470jw01d dc630 c0g (eia) 47 5% 3.2 1.6 1.0 1.5 0.3 min. grm31a5c2j560jw01d dc630 c0g (eia) 56 5% 3.2 1.6 1.0 1.5 0.3 min. continued on the following page. ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
for general purpose grm/grj series only for applications ac250v type ga2 series safety standard certified ga3 series product information 161 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. part number rated voltage (v) tc code (standard) capacitance (pf) length l (mm) width w (mm) thickness t (mm) electrode g min. (mm) electrode e (mm) continued from the preceding page. grm31a5c2j680jw01d dc630 c0g (eia) 68 5% 3.2 1.6 1.0 1.5 0.3 min. grm31a5c2j820jw01d dc630 c0g (eia) 82 5% 3.2 1.6 1.0 1.5 0.3 min. grm31a5c2j101jw01d dc630 c0g (eia) 100 5% 3.2 1.6 1.0 1.5 0.3 min. grm31a5c2j121jw01d dc630 c0g (eia) 120 5% 3.2 1.6 1.0 1.5 0.3 min. grm31a5c2j151jw01d dc630 c0g (eia) 150 5% 3.2 1.6 1.0 1.5 0.3 min. grm31a5c2j181jw01d dc630 c0g (eia) 180 5% 3.2 1.6 1.0 1.5 0.3 min. grm31a5c2j221jw01d dc630 c0g (eia) 220 5% 3.2 1.6 1.0 1.5 0.3 min. grm31a5c2j271jw01d dc630 c0g (eia) 270 5% 3.2 1.6 1.0 1.5 0.3 min. grm31a5c2j331jw01d dc630 c0g (eia) 330 5% 3.2 1.6 1.0 1.5 0.3 min. grm31a5c2j391jw01d dc630 c0g (eia) 390 5% 3.2 1.6 1.0 1.5 0.3 min. grm31a5c2j471jw01d dc630 c0g (eia) 470 5% 3.2 1.6 1.0 1.5 0.3 min. grm31a5c2j561jw01d dc630 c0g (eia) 560 5% 3.2 1.6 1.0 1.5 0.3 min. grm31b5c2j681jw01l dc630 c0g (eia) 680 5% 3.2 1.6 1.25 1.5 0.3 min. grm31b5c2j821jw01l dc630 c0g (eia) 820 5% 3.2 1.6 1.25 1.5 0.3 min. grm31b5c2j102jw01l dc630 c0g (eia) 1000 5% 3.2 1.6 1.25 1.5 0.3 min. grm31a5c3a100jw01d dc1000 c0g (eia) 10 5% 3.2 1.6 1.0 1.5 0.3 min. grm31a5c3a120jw01d dc1000 c0g (eia) 12 5% 3.2 1.6 1.0 1.5 0.3 min. grm31a5c3a150jw01d dc1000 c0g (eia) 15 5% 3.2 1.6 1.0 1.5 0.3 min. grm31a5c3a180jw01d dc1000 c0g (eia) 18 5% 3.2 1.6 1.0 1.5 0.3 min. grm31a5c3a220jw01d dc1000 c0g (eia) 22 5% 3.2 1.6 1.0 1.5 0.3 min. grm31a5c3a270jw01d dc1000 c0g (eia) 27 5% 3.2 1.6 1.0 1.5 0.3 min. grm31a5c3a330jw01d dc1000 c0g (eia) 33 5% 3.2 1.6 1.0 1.5 0.3 min. grm31a5c3a390jw01d dc1000 c0g (eia) 39 5% 3.2 1.6 1.0 1.5 0.3 min. grm31a5c3a470jw01d dc1000 c0g (eia) 47 5% 3.2 1.6 1.0 1.5 0.3 min. grm31a5c3a560jw01d dc1000 c0g (eia) 56 5% 3.2 1.6 1.0 1.5 0.3 min. grm31a5c3a680jw01d dc1000 c0g (eia) 68 5% 3.2 1.6 1.0 1.5 0.3 min. grm31a5c3a820jw01d dc1000 c0g (eia) 82 5% 3.2 1.6 1.0 1.5 0.3 min. grm31a5c3a101jw01d dc1000 c0g (eia) 100 5% 3.2 1.6 1.0 1.5 0.3 min. u2j characteristics part number rated voltage (v) tc code (standard) capacitance (pf) length l (mm) width w (mm) thickness t (mm) electrode g min. (mm) electrode e (mm) grm21a7u2e101jw31d dc250 u2j (eia) 100 5% 2.0 1.25 1.0 0.7 0.3 min. grm21a7u2e121jw31d dc250 u2j (eia) 120 5% 2.0 1.25 1.0 0.7 0.3 min. grm21a7u2e151jw31d dc250 u2j (eia) 150 5% 2.0 1.25 1.0 0.7 0.3 min. grm21a7u2e181jw31d dc250 u2j (eia) 180 5% 2.0 1.25 1.0 0.7 0.3 min. grm21a7u2e221jw31d dc250 u2j (eia) 220 5% 2.0 1.25 1.0 0.7 0.3 min. grm21a7u2e271jw31d dc250 u2j (eia) 270 5% 2.0 1.25 1.0 0.7 0.3 min. grm21a7u2e331jw31d dc250 u2j (eia) 330 5% 2.0 1.25 1.0 0.7 0.3 min. grm21a7u2e391jw31d dc250 u2j (eia) 390 5% 2.0 1.25 1.0 0.7 0.3 min. grm21a7u2e471jw31d dc250 u2j (eia) 470 5% 2.0 1.25 1.0 0.7 0.3 min. grm21a7u2e561jw31d dc250 u2j (eia) 560 5% 2.0 1.25 1.0 0.7 0.3 min. grm21a7u2e681jw31d dc250 u2j (eia) 680 5% 2.0 1.25 1.0 0.7 0.3 min. grm21a7u2e821jw31d dc250 u2j (eia) 820 5% 2.0 1.25 1.0 0.7 0.3 min. grm21a7u2e102jw31d dc250 u2j (eia) 1000 5% 2.0 1.25 1.0 0.7 0.3 min. grm21a7u2e122jw31d dc250 u2j (eia) 1200 5% 2.0 1.25 1.0 0.7 0.3 min. grm21a7u2e152jw31d dc250 u2j (eia) 1500 5% 2.0 1.25 1.0 0.7 0.3 min. grm21a7u2e182jw31d dc250 u2j (eia) 1800 5% 2.0 1.25 1.0 0.7 0.3 min. grm21a7u2e222jw31d dc250 u2j (eia) 2200 5% 2.0 1.25 1.0 0.7 0.3 min. grm21b7u2e272jw32l dc250 u2j (eia) 2700 5% 2.0 1.25 1.25 0.7 0.3 min. grm31a7u2e272jw31d dc250 u2j (eia) 2700 5% 3.2 1.6 1.0 1.5 0.3 min. grm21b7u2e332jw32l dc250 u2j (eia) 3300 5% 2.0 1.25 1.25 0.7 0.3 min. grm31a7u2e332jw31d dc250 u2j (eia) 3300 5% 3.2 1.6 1.0 1.5 0.3 min. grm21b7u2e392jw32l dc250 u2j (eia) 3900 5% 2.0 1.25 1.25 0.7 0.3 min. grm31a7u2e392jw31d dc250 u2j (eia) 3900 5% 3.2 1.6 1.0 1.5 0.3 min. continued on the following page. ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
for general purpose grm/grj series only for applications ac250v type ga2 series safety standard certified ga3 series product information 162 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. part number rated voltage (v) tc code (standard) capacitance (pf) length l (mm) width w (mm) thickness t (mm) electrode g min. (mm) electrode e (mm) continued from the preceding page. grm21b7u2e472jw32l dc250 u2j (eia) 4700 5% 2.0 1.25 1.25 0.7 0.3 min. grm31a7u2e472jw31d dc250 u2j (eia) 4700 5% 3.2 1.6 1.0 1.5 0.3 min. grm21b7u2e562jw32l dc250 u2j (eia) 5600 5% 2.0 1.25 1.25 0.7 0.3 min. grm31a7u2e562jw31d dc250 u2j (eia) 5600 5% 3.2 1.6 1.0 1.5 0.3 min. grm31b7u2e682jw31l dc250 u2j (eia) 6800 5% 3.2 1.6 1.25 1.5 0.3 min. grm31b7u2e822jw31l dc250 u2j (eia) 8200 5% 3.2 1.6 1.25 1.5 0.3 min. grm31b7u2e103jw31l dc250 u2j (eia) 10000 5% 3.2 1.6 1.25 1.5 0.3 min. grm31a7u2j100jw31d dc630 u2j (eia) 10 5% 3.2 1.6 1.0 1.5 0.3 min. grm31a7u2j120jw31d dc630 u2j (eia) 12 5% 3.2 1.6 1.0 1.5 0.3 min. grm31a7u2j150jw31d dc630 u2j (eia) 15 5% 3.2 1.6 1.0 1.5 0.3 min. grm31a7u2j180jw31d dc630 u2j (eia) 18 5% 3.2 1.6 1.0 1.5 0.3 min. grm31a7u2j220jw31d dc630 u2j (eia) 22 5% 3.2 1.6 1.0 1.5 0.3 min. grm31a7u2j270jw31d dc630 u2j (eia) 27 5% 3.2 1.6 1.0 1.5 0.3 min. grm31a7u2j330jw31d dc630 u2j (eia) 33 5% 3.2 1.6 1.0 1.5 0.3 min. grm31a7u2j390jw31d dc630 u2j (eia) 39 5% 3.2 1.6 1.0 1.5 0.3 min. grm31a7u2j470jw31d dc630 u2j (eia) 47 5% 3.2 1.6 1.0 1.5 0.3 min. grm31a7u2j560jw31d dc630 u2j (eia) 56 5% 3.2 1.6 1.0 1.5 0.3 min. grm31a7u2j680jw31d dc630 u2j (eia) 68 5% 3.2 1.6 1.0 1.5 0.3 min. grm31a7u2j820jw31d dc630 u2j (eia) 82 5% 3.2 1.6 1.0 1.5 0.3 min. grm31a7u2j101jw31d dc630 u2j (eia) 100 5% 3.2 1.6 1.0 1.5 0.3 min. grm31a7u2j121jw31d dc630 u2j (eia) 120 5% 3.2 1.6 1.0 1.5 0.3 min. grm31a7u2j151jw31d dc630 u2j (eia) 150 5% 3.2 1.6 1.0 1.5 0.3 min. grm31a7u2j181jw31d dc630 u2j (eia) 180 5% 3.2 1.6 1.0 1.5 0.3 min. grm31a7u2j221jw31d dc630 u2j (eia) 220 5% 3.2 1.6 1.0 1.5 0.3 min. grm31a7u2j271jw31d dc630 u2j (eia) 270 5% 3.2 1.6 1.0 1.5 0.3 min. grm31a7u2j331jw31d dc630 u2j (eia) 330 5% 3.2 1.6 1.0 1.5 0.3 min. grm31a7u2j391jw31d dc630 u2j (eia) 390 5% 3.2 1.6 1.0 1.5 0.3 min. grm31a7u2j471jw31d dc630 u2j (eia) 470 5% 3.2 1.6 1.0 1.5 0.3 min. grm31a7u2j561jw31d dc630 u2j (eia) 560 5% 3.2 1.6 1.0 1.5 0.3 min. grm31a7u2j681jw31d dc630 u2j (eia) 680 5% 3.2 1.6 1.0 1.5 0.3 min. grm31a7u2j821jw31d dc630 u2j (eia) 820 5% 3.2 1.6 1.0 1.5 0.3 min. grm31a7u2j102jw31d dc630 u2j (eia) 1000 5% 3.2 1.6 1.0 1.5 0.3 min. grm32a7u2j122jw31d dc630 u2j (eia) 1200 5% 3.2 2.5 1.0 1.5 0.3 min. grm32a7u2j152jw31d dc630 u2j (eia) 1500 5% 3.2 2.5 1.0 1.5 0.3 min. grm32a7u2j182jw31d dc630 u2j (eia) 1800 5% 3.2 2.5 1.0 1.5 0.3 min. grm32a7u2j222jw31d dc630 u2j (eia) 2200 5% 3.2 2.5 1.0 1.5 0.3 min. grm31a7u3a100jw31d dc1000 u2j (eia) 10 5% 3.2 1.6 1.0 1.5 0.3 min. grm31a7u3a120jw31d dc1000 u2j (eia) 12 5% 3.2 1.6 1.0 1.5 0.3 min. grm31a7u3a150jw31d dc1000 u2j (eia) 15 5% 3.2 1.6 1.0 1.5 0.3 min. grm31a7u3a180jw31d dc1000 u2j (eia) 18 5% 3.2 1.6 1.0 1.5 0.3 min. grm31a7u3a220jw31d dc1000 u2j (eia) 22 5% 3.2 1.6 1.0 1.5 0.3 min. grm31a7u3a270jw31d dc1000 u2j (eia) 27 5% 3.2 1.6 1.0 1.5 0.3 min. grm31a7u3a330jw31d dc1000 u2j (eia) 33 5% 3.2 1.6 1.0 1.5 0.3 min. grm31a7u3a390jw31d dc1000 u2j (eia) 39 5% 3.2 1.6 1.0 1.5 0.3 min. grm31a7u3a470jw31d dc1000 u2j (eia) 47 5% 3.2 1.6 1.0 1.5 0.3 min. grm31a7u3a560jw31d dc1000 u2j (eia) 56 5% 3.2 1.6 1.0 1.5 0.3 min. grm31a7u3a680jw31d dc1000 u2j (eia) 68 5% 3.2 1.6 1.0 1.5 0.3 min. grm31a7u3a820jw31d dc1000 u2j (eia) 82 5% 3.2 1.6 1.0 1.5 0.3 min. grm31a7u3a101jw31d dc1000 u2j (eia) 100 5% 3.2 1.6 1.0 1.5 0.3 min. grm31a7u3a121jw31d dc1000 u2j (eia) 120 5% 3.2 1.6 1.0 1.5 0.3 min. grm31a7u3a151jw31d dc1000 u2j (eia) 150 5% 3.2 1.6 1.0 1.5 0.3 min. grm31a7u3a181jw31d dc1000 u2j (eia) 180 5% 3.2 1.6 1.0 1.5 0.3 min. grm31a7u3a221jw31d dc1000 u2j (eia) 220 5% 3.2 1.6 1.0 1.5 0.3 min. grm31a7u3a271jw31d dc1000 u2j (eia) 270 5% 3.2 1.6 1.0 1.5 0.3 min. grm31a7u3a331jw31d dc1000 u2j (eia) 330 5% 3.2 1.6 1.0 1.5 0.3 min. grm31b7u3a391jw31l dc1000 u2j (eia) 390 5% 3.2 1.6 1.25 1.5 0.3 min. grm31b7u3a471jw31l dc1000 u2j (eia) 470 5% 3.2 1.6 1.25 1.5 0.3 min. continued on the following page. ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
for general purpose grm/grj series only for applications ac250v type ga2 series safety standard certified ga3 series product information 163 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. part number rated voltage (v) tc code (standard) capacitance (pf) length l (mm) width w (mm) thickness t (mm) electrode g min. (mm) electrode e (mm) continued from the preceding page. grm31a7u3d100jw31d dc2000 u2j (eia) 10 5% 3.2 1.6 1.0 1.8 0.3 min. grm31a7u3d120jw31d dc2000 u2j (eia) 12 5% 3.2 1.6 1.0 1.8 0.3 min. grm31a7u3d150jw31d dc2000 u2j (eia) 15 5% 3.2 1.6 1.0 1.8 0.3 min. grm31a7u3d180jw31d dc2000 u2j (eia) 18 5% 3.2 1.6 1.0 1.8 0.3 min. grm31a7u3d220jw31d dc2000 u2j (eia) 22 5% 3.2 1.6 1.0 1.8 0.3 min. grm31a7u3d270jw31d dc2000 u2j (eia) 27 5% 3.2 1.6 1.0 1.8 0.3 min. grm31a7u3d330jw31d dc2000 u2j (eia) 33 5% 3.2 1.6 1.0 1.8 0.3 min. grm31a7u3d390jw31d dc2000 u2j (eia) 39 5% 3.2 1.6 1.0 1.8 0.3 min. grm31a7u3d470jw31d dc2000 u2j (eia) 47 5% 3.2 1.6 1.0 1.8 0.3 min. grm31a7u3d560jw31d dc2000 u2j (eia) 56 5% 3.2 1.6 1.0 1.8 0.3 min. grm31a7u3d680jw31d dc2000 u2j (eia) 68 5% 3.2 1.6 1.0 1.8 0.3 min. grm32a7u3d820jw31d dc2000 u2j (eia) 82 5% 3.2 2.5 1.0 1.8 0.3 min. grm32a7u3d101jw31d dc2000 u2j (eia) 100 5% 3.2 2.5 1.0 1.8 0.3 min. grm32a7u3d121jw31d dc2000 u2j (eia) 120 5% 3.2 2.5 1.0 1.8 0.3 min. grm32a7u3d151jw31d dc2000 u2j (eia) 150 5% 3.2 2.5 1.0 1.8 0.3 min. grm32b7u3d181jw31l dc2000 u2j (eia) 180 5% 3.2 2.5 1.25 1.8 0.3 min. grm32b7u3d221jw31l dc2000 u2j (eia) 220 5% 3.2 2.5 1.25 1.8 0.3 min. grm42a7u3f270jw31l dc3150 u2j (eia) 27 5% 4.5 2.0 1.0 2.9 0.3 min. grm42a7u3f330jw31l dc3150 u2j (eia) 33 5% 4.5 2.0 1.0 2.9 0.3 min. grm42a7u3f390jw31l dc3150 u2j (eia) 39 5% 4.5 2.0 1.0 2.9 0.3 min. grm42a7u3f470jw31l dc3150 u2j (eia) 47 5% 4.5 2.0 1.0 2.9 0.3 min. grm42a7u3f560jw31l dc3150 u2j (eia) 56 5% 4.5 2.0 1.0 2.9 0.3 min. grm42a7u3f680jw31l dc3150 u2j (eia) 68 5% 4.5 2.0 1.0 2.9 0.3 min. grm42a7u3f820jw31l dc3150 u2j (eia) 82 5% 4.5 2.0 1.0 2.9 0.3 min. grm42a7u3f101jw31l dc3150 u2j (eia) 100 5% 4.5 2.0 1.0 2.9 0.3 min. ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
medium voltage low dissipation factor specifications and test methods continued on the following page. solder the capacitor to the test jig (glass epoxy board). the capacitor should be subjected to a simple harmonic motion having a total amplitude of 1.5mm, the frequency being varied uniformly between the approximate limits of 10 and 55hz. the frequency range, from 10 to 55hz and return to 10hz, should be traversed in approximately 1 min. this motion should be applied for a period of 2 hrs. in each of 3 mutually perpendicular directions (total of 6 hrs.). 10 vibration resistance appearance no defects or abnormalities capacitance within the specified tolerance q 1,000 min. solder the capacitor to the testing jig (glass epoxy board) shown in fig. 1. then apply 10n force in the direction of the arrow. the soldering should be done using the reflow method and should be conducted with care so that the soldering is uniform and free of defects such as heat shock. fig. 1 9 adhesive strength of termination no removal of the terminations or other defect should occur. the capacitance measurement should be made at each step specified in the table. 8 capacitance temperature characteristics temp. coefficient c0g char. : 0 t 30ppm/ d (temp. range : w 25 to w 125 d ) 0 w 30, y 72ppm/ d (temp. range : y 55 to w 25 d ) u2j char. : y 750 t 120ppm/ d (temp. range : w 25 to w 125 d ) y 750 w 120, y 347ppm/ d (temp. range : y 55 to w 25 d ) 7q 1,000 min. the capacitance/q should be measured at the frequency and voltage shown as follows. 6 capacitance within the specified tolerance the insulation resistance should be measured with dc500 t 50v (dc250 t 25v in case of rated voltage: dc250v) and within 60 t 5 sec. of charging. 5 insulation resistance (i.r.) more than 10,000m no failure should be observed when voltage in the table is applied between the terminations for 1 to 5 sec., provided the charge/discharge current is less than 50ma. 4 dielectric strength no defects or abnormalities using calipers and micrometers 3 dimensions within the specified dimension visual inspection 2 appearance no defects or abnormalities y 1 operating temperature range y 55 to w 125 d no. test method specifications item rated voltage test voltage 200% of the rated voltage 150% of the rated voltage 130% of the rated voltage dc250v dc630v dc1kv, dc2kv, dc3.15kv capacitance frequency 1 t 0.2mhz 1 t 0.2khz voltage ac0.5 to 5v(r.m.s.) ac1 t 0.2v(r.m.s.) c f 1,000pf c u 1,000pf step temperature ( d ) 25 t 2 min. operating temp. t 3 25 t 2 max. operating temp. t 2 25 t 2 1 2 3 4 5 10n, 10 t 1s glass epoxy board solder resist cu glass epoxy board grm series specifications and test methods 164 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. for general purpose grm/grj series only for applications ac250v type ga2 series safety standard certified ga3 series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
medium voltage low dissipation factor specifications and test methods continued from the preceding page. * "room condition" temperature: 15 to 35 ? c, relative humidity: 45 to 75%, atmospheric pressure: 86 to 106kpa apply voltage as in table for 1,000 w 48 y 0 hrs. at maximum operating temperature t 3 d . remove and let sit for 24 t 2 hrs. at room condition,* then measure. the charge/discharge current is less than 50ma. 16 life appearance no marking defects capacitance change within t 3.0% q 350 min. i.r. more than 1,000m dielectric strength in accordance with item no.4 let the capacitor sit at 40 t 2 d and relative humidity of 90 to 95% for 500 w 24 y 0 hrs. remove and let sit for 24 t 2 hrs. at room condition,* then measure. 15 humidity (steady state) appearance no marking defects capacitance change within t 5.0% q 350 min. i.r. more than 1,000m dielectric strength in accordance with item no.4 fix the capacitor to the supporting jig (glass epoxy board) shown in fig. 4. perform the 5 cycles according to the 4 heat treatments listed in the following table. let sit for 24 t 2 hrs. at room condition,* then measure. fig. 4 14 temperature cycle appearance no marking defects capacitance change within t 2.5% q 500 min. i.r. more than 10,000m dielectric strength in accordance with item no.4 preheat the capacitor at 120 to 150 d * for 1 min. immerse the capacitor in solder solution at 260 t 5 d for 10 t 1 sec. let sit at room condition* for 24 t 2 hrs., then measure. # immersing speed : 25 t 2.5mm/s * preheating for more than 3.2 z 2.5mm 13 resistance to soldering heat appearance no marking defects capacitance change within t 2.5% q 1,000 min. i.r. more than 10,000m dielectric strength in accordance with item no.4 immerse the capacitor in a solution of ethanol (jis-k-8101) and rosin (jis-k-5902) (25% rosin in weight proportion). immerse in solder solution for 2 t 0.5 sec. immersing speed: 25 t 2.5mm/s temp. of solder: 245 t 5 ? c lead free solder (sn-3.0ag-0.5cu) 235 t 5 ? c h60a or h63a eutectic solder 12 solderability of termination 75% of the terminations are to be soldered evenly and continuously. solder the capacitor to the testing jig (glass epoxy board) shown in fig. 2. then apply a force in the direction shown in fig. 3. the soldering should be done using the reflow method and should be conducted with care so that the soldering is uniform and free of defects such as heat shock. fig. 3 11 deflection no marking defects fig. 2 no. test method specifications item l z w (mm) a dimension (mm) 1.2 2.2 2.2 3.5 b 4.0 5.0 5.0 7.0 c 1.65 2.0 2.9 2.4 d 1.0 2.0 z 1.25 3.2 z 1.6 3.2 z 2.5 4.5 z 2.0 step temperature 100 to 120 d 170 to 200 d time 1 min. 1 min. 1 2 step temperature ( d ) min. operating temp. t 3 room temp. max. operating temp. t 2 room temp. time (min.) 30 t 3 2 to 3 30 t 3 2 to 3 1 2 3 4 rated voltage applied voltage 150% of the rated voltage 120% of the rated voltage dc250v dc630v, dc1kv, dc2kv, dc3.15kv capacitance meter flexure=1 (in mm) 20 50 r230 45 45 pressurizing speed: 1.0mm/s pressurize solder resist cu glass epoxy board tu x | ? q u | b
r s t v w x [ _ ? ? q t u y z \] ^ _ ` | a ? -? s t _ _ ` a s t s t c q r v u xy | ?a 100 u y | a z ^ ? 40 f 4.5 t : 1.6 d grm series specifications and test methods 165 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. for general purpose grm/grj series only for applications ac250v type ga2 series safety standard certified ga3 series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
166 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. chip monolithic ceramic capacitors (medium voltage) high capacitance for general use grm series n features 1. a new monolithic structure for small, high capacitance capable of operating at high voltage levels. 2. sn-plated external electrodes provide good solderability. 3. use the grm18/21/31 types with flow or reflow soldering, and other types with reflow soldering only. n applications 1. ideal for use on diode-snubber circuits for switching power supplies. 2. ideal for use as primary-secondary coupling for dc-dc converters. 3. ideal for use on line filters and ringer detectors for telephones, facsimiles and modems. do not use these products in any automotive power train or safety equipment including battery chargers for electric vehicles and plug-in hybrids. only murata products clearly stipulated as "for automotive use" can be used for automobile applications such as power train and safety equipment.
167 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. part number rated voltage (v) tc code (standard) capacitance length l (mm) width w (mm) thickness t (mm) electrode g min. (mm) electrode e (mm) continued from the preceding page. grm43dr72e224kw01l dc250 x7r (eia) 0.22 f 10% 4.5 3.2 2.0 2.2 0.3 min. grm43dr72e334kw01l dc250 x7r (eia) 0.33 f 10% 4.5 3.2 2.0 2.2 0.3 min. grm55dr72e334kw01l dc250 x7r (eia) 0.33 f 10% 5.7 5.0 2.0 3.2 0.3 min. grm43dr72e474kw01l dc250 x7r (eia) 0.47 f 10% 4.5 3.2 2.0 2.2 0.3 min. grm55dr72e474kw01l dc250 x7r (eia) 0.47 f 10% 5.7 5.0 2.0 3.2 0.3 min. grm55dr72e105kw01l dc250 x7r (eia) 1.0 f 10% 5.7 5.0 2.0 3.2 0.3 min. grm31br72j102kw01l dc630 x7r (eia) 1000pf 10% 3.2 1.6 1.25 1.2 0.3 min. grm31br72j152kw01l dc630 x7r (eia) 1500pf 10% 3.2 1.6 1.25 1.2 0.3 min. grm31br72j222kw01l dc630 x7r (eia) 2200pf 10% 3.2 1.6 1.25 1.2 0.3 min. grm31br72j332kw01l dc630 x7r (eia) 3300pf 10% 3.2 1.6 1.25 1.2 0.3 min. grm31br72j472kw01l dc630 x7r (eia) 4700pf 10% 3.2 1.6 1.25 1.2 0.3 min. grm31br72j682kw01l dc630 x7r (eia) 6800pf 10% 3.2 1.6 1.25 1.2 0.3 min. grm31br72j103kw01l dc630 x7r (eia) 10000pf 10% 3.2 1.6 1.25 1.2 0.3 min. grm31cr72j153kw03l dc630 x7r (eia) 15000pf 10% 3.2 1.6 1.6 1.2 0.3 min. grm32qr72j223kw01l dc630 x7r (eia) 22000pf 10% 3.2 2.5 1.5 1.2 0.3 min. grm32dr72j333kw01l dc630 x7r (eia) 33000pf 10% 3.2 2.5 2.0 1.2 0.3 min. grm32dr72j473kw01l dc630 x7r (eia) 47000pf 10% 3.2 2.5 2.0 1.2 0.3 min. grm43qr72j683kw01l dc630 x7r (eia) 68000pf 10% 4.5 3.2 1.5 2.2 0.3 min. grm43dr72j104kw01l dc630 x7r (eia) 0.10 f 10% 4.5 3.2 2.0 2.2 0.3 min. grm55dr72j154kw01l dc630 x7r (eia) 0.15 f 10% 5.7 5.0 2.0 3.2 0.3 min. grm55dr72j224kw01l dc630 x7r (eia) 0.22 f 10% 5.7 5.0 2.0 3.2 0.3 min. grm31br73a471kw01l dc1000 x7r (eia) 470pf 10% 3.2 1.6 1.25 1.2 0.3 min. grm31br73a102kw01l dc1000 x7r (eia) 1000pf 10% 3.2 1.6 1.25 1.2 0.3 min. grm31br73a152kw01l dc1000 x7r (eia) 1500pf 10% 3.2 1.6 1.25 1.2 0.3 min. grm31br73a222kw01l dc1000 x7r (eia) 2200pf 10% 3.2 1.6 1.25 1.2 0.3 min. grm31br73a332kw01l dc1000 x7r (eia) 3300pf 10% 3.2 1.6 1.25 1.2 0.3 min. grm31br73a472kw01l dc1000 x7r (eia) 4700pf 10% 3.2 1.6 1.25 1.2 0.3 min. grm32qr73a682kw01l dc1000 x7r (eia) 6800pf 10% 3.2 2.5 1.5 1.2 0.3 min. grm32qr73a103kw01l dc1000 x7r (eia) 10000pf 10% 3.2 2.5 1.5 1.2 0.3 min. grm32dr73a153kw01l dc1000 x7r (eia) 15000pf 10% 3.2 2.5 2.0 1.2 0.3 min. grm32dr73a223kw01l dc1000 x7r (eia) 22000pf 10% 3.2 2.5 2.0 1.2 0.3 min. grm43dr73a333kw01l dc1000 x7r (eia) 33000pf 10% 4.5 3.2 2.0 2.2 0.3 min. grm43dr73a473kw01l dc1000 x7r (eia) 47000pf 10% 4.5 3.2 2.0 2.2 0.3 min. grm55dr73a104kw01l dc1000 x7r (eia) 0.10 f 10% 5.7 5.0 2.0 3.2 0.3 min. for general purpose grm/grj series only for applications ac250v type ga2 series safety standard certified ga3 series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
continued on the following page. step temperature ( c) 25 2 min. operating temp. 3 25 2 max. operating temp. 2 25 2 1 2 3 4 5 * "room condition" temperature: 15 to 35 c, relative humidity: 45 to 75%, atmospheric pressure: 86 to 106kpa solder the capacitor to the test jig (glass epoxy board). the capacitor should be subjected to a simple harmonic motion having a total amplitude of 1.5mm, the frequency being varied uniformly between the approximate limits of 10 and 55hz. the frequency range, from 10 to 55hz and return to 10hz, should be traversed in approximately 1 min. this motion should be applied for a period of 2 hrs. in each of 3 mutually perpendicular directions (total of 6 hrs.). 10 vibration resistance appearance no defects or abnormalities capacitance within the specified tolerance d.f. 0.025 max. solder the capacitor to the testing jig (glass epoxy board) shown in fig. 1. then apply 10n force in the direction of the arrow. the soldering should be done using the reflow method and should be conducted with care so that the soldering is uniform and free of defects such as heat shock. fig. 1 9 adhesive strength of termination no removal of the terminations or other defect should occur. the capacitance measurement should be made at each step specified in the table. ?retreatment perform a heat treatment at 150 +0 ?0 c for 60 5 min. and then let sit for 24 2 hrs. at room condition.* 8 capacitance temperature characteristics cap. change within 15% (temp. range: ?5 to +125 c) 7 dissipation factor (d.f.) 0.025 max. the capacitance/d.f. should be measured at a frequency of 1 0.2khz and a voltage of ac1 0.2v(r.m.s.) 6 capacitance within the specified tolerance the insulation resistance should be measured with dc500 50v (dc250 25v in case of rated voltage: dc250v) and within 60 5 sec. of charging. 5 insulation resistance (i.r.) c u 0.01 f: more than 100m ? f c f 0.01 f: more than 10,000m ? no failure should be observed when 150% of the rated voltage (200% of the rated voltage in case of rated voltage: dc250v, 120% of the rated voltage in case of rated voltage: dc1kv) is applied between the terminations for 1 to 5 sec., provided the charge/discharge current is less than 50ma. 4 dielectric strength no defects or abnormalities using calipers and micrometers 3 dimensions within the specified dimensions visual inspection 2 appearance no defects or abnormalities 1 operating temperature range ?5 to +125 c no. test method specifications item solder resist cu glass epoxy board 10n (5n : size 1.6 g 0.8mm only), 10 t 1s glass epoxy board medium voltage high capacitance for general use specifications and test methods grm series specifications and test methods 168 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. for general purpose grm/grj series only for applications ac250v type ga2 series safety standard certified ga3 series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
continued from the preceding page. continued on the following page. * "room condition" temperature: 15 to 35 ? c, relative humidity: 45 to 75%, atmospheric pressure: 86 to 106kpa let the capacitor sit at 40 2 ? c and relative humidity of 90 to 95% for 500 +24 e0 hrs. remove and let sit for 24 2 hrs. at room condition,* then measure. ?retreatment perform a heat treatment at 150 +0 ?0 c for 60 5 min. and then let sit for 24 2 hrs. at room condition.* 15 humidity (steady state) appearance no marking defects capacitance change within 15% d.f. 0.05 max. i.r. c u 0.01 f: more than 10m ? f c f 0.01 f: more than 1,000m ? dielectric strength in accordance with item no.4 fix the capacitor to the supporting jig (glass epoxy board) shown in fig. 4. perform the 5 cycles according to the 4 heat treatments listed in the following table. let sit for 24 2 hrs. at room condition,* then measure. ?retreatment perform a heat treatment at 150 +0 ?0 c for 60 5 min. and then let sit for 24 2 hrs. at room condition.* fig. 4 14 temperature cycle appearance no marking defects capacitance change within 7.5% d.f. 0.025 max. i.r. c u 0.01 f: more than 100m ? f c f 0.01 f: more than 10,000m ? dielectric strength in accordance with item no.4 preheat the capacitor at 120 to 150 c * for 1 min. immerse the capacitor in solder solution at 260 5 ? c for 10 1 sec. let sit at room condition* for 24 2 hrs., then measure. ?mmersing speed: 25 2.5mm/s ?retreatment perform a heat treatment at 150 +0 ?0 c for 60 5 min. and then let sit for 24 2 hrs. at room condition.* * preheating for more than 3.2 z 2.5mm 13 resistance to soldering heat appearance no marking defects capacitance change within 10% d.f. 0.025 max. i.r. c u 0.01 f: more than 100m ? f c f 0.01 f: more than 10,000m ? dielectric strength in accordance with item no.4 immerse the capacitor in a solution of ethanol (jis-k-8101) and rosin (jis-k-5902) (25% rosin in weight proportion). immerse in solder solution for 2 0.5 sec. immersing speed: 25 2.5mm/s temp. of solder: 245 5 c lead free solder (sn-3.0ag-0.5cu) 235 5 c h60a or h63a eutectic solder 12 solderability of termination 75% of the terminations are to be soldered evenly and continuously. solder the capacitor to the testing jig (glass epoxy board) shown in fig. 2. then apply a force in the direction shown in fig. 3. the soldering should be done using the reflow method and should be conducted with care so that the soldering is uniform and free of defects such as heat shock. (in mm) fig. 3 11 deflection no marking defects fig. 2 no. test method specifications item tu x | ? q u | b
r s t v w x [ _ ? ? q t u y z \] ^ _ ` | a ? -? s t _ _ ` a s t s t c q r v u xy | ?a 100 u y | a z ^ ? 40 f 4.5 t : 1.6 d capacitance meter flexure=1 20 50 r230 45 45 pressurizing speed: 1.0mm/s pressurize l z w (mm) dimension (mm) a 1.0 1.2 2.2 2.2 3.5 4.5 b 3.0 4.0 5.0 5.0 7.0 8.0 c 1.2 1.65 2.0 2.9 3.7 5.6 d 1.0 1.6 z 0.8 2.0 z 1.25 3.2 z 1.6 3.2 z 2.5 4.5 z 3.2 5.7 z 5.0 step temperature 100 to 120 c 170 to 200 c time 1 min. 1 min. 1 2 step temperature ( c) min. operating temp. 3 room temp. max. operating temp. 2 room temp. time (min.) 30 3 2 to 3 30 3 2 to 3 1 2 3 4 solder resist cu glass epoxy board medium voltage high capacitance for general use specifications and test methods grm series specifications and test methods 169 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. for general purpose grm/grj series only for applications ac250v type ga2 series safety standard certified ga3 series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
continued from the preceding page. * "room condition" temperature: 15 to 35 ? c, relative humidity: 45 to 75%, atmospheric pressure: 86 to 106kpa apply the rated voltage at 40 2 ? c and relative humidity of 90 to 95% for 500 +24 e0 hrs. remove and let sit for 24 2 hrs. at room condition,* then measure. ?retreatment apply test voltage for 60 5 min. at test temperature. remove and let sit for 24 2 hrs. at room condition.* 17 humidity loading (application: dc250v, dc630v item) appearance no marking defects capacitance change within 15% d.f. 0.05 max. i.r. c u 0.01 f: more than 10m ? f c f 0.01 f: more than 1,000m ? dielectric strength in accordance with item no.4 apply 120% of the rated voltage (150% of the rated voltage in case of rated voltage: dc250v, 110% of the rated voltage in case of rated voltage: dc1kv) for 1,000 +48 ? hrs. at maximum operating temperature 3 c. remove and let sit for 24 2hrs. at room condition,* then measure. the charge/discharge current is less than 50ma. ?retreatment apply test voltage for 60 5 min. at test temperature. remove and let sit for 24 2 hrs. at room condition.* 16 life appearance no marking defects capacitance change within 15% (rated voltage: dc250v, dc630v) within 20% (rated voltage: dc1kv) d.f. 0.05 max. i.r. c u 0.01 f: more than 10m ? f c f 0.01 f: more than 1,000m ? dielectric strength in accordance with item no.4 no. test method specifications item medium voltage high capacitance for general use specifications and test methods grm series specifications and test methods 170 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. for general purpose grm/grj series only for applications ac250v type ga2 series safety standard certified ga3 series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
171 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. chip monolithic ceramic capacitors (medium voltage) soft termination type grj series
172 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. part number rated voltage (v) tc code (standard) capacitance length l (mm) width w (mm) thickness t (mm) electrode g min. (mm) electrode e (mm) continued from the preceding page. grj31br72j332kwj1l dc630 x7r (eia) 3300pf 10% 3.2 1.6 1.25 1.2 0.3 min. grj31br72j472kwj1l dc630 x7r (eia) 4700pf 10% 3.2 1.6 1.25 1.2 0.3 min. grj31br72j682kwj1l dc630 x7r (eia) 6800pf 10% 3.2 1.6 1.25 1.2 0.3 min. grj31br72j103kwj1l dc630 x7r (eia) 10000pf 10% 3.2 1.6 1.25 1.2 0.3 min. grj31cr72j153kwj3l dc630 x7r (eia) 15000pf 10% 3.2 1.6 1.6 1.2 0.3 min. grj32qr72j223kwj1l dc630 x7r (eia) 22000pf 10% 3.2 2.5 1.5 1.2 0.3 min. grj32dr72j333kwj1l dc630 x7r (eia) 33000pf 10% 3.2 2.5 2.0 1.2 0.3 min. grj32dr72j473kwj1l dc630 x7r (eia) 47000pf 10% 3.2 2.5 2.0 1.2 0.3 min. grj43qr72j683kwj1l dc630 x7r (eia) 68000pf 10% 4.5 3.2 1.5 2.2 0.3 min. grj43dr72j104kwj1l dc630 x7r (eia) 0.10 f 10% 4.5 3.2 2.0 2.2 0.3 min. grj55dr72j154kwj1l dc630 x7r (eia) 0.15 f 10% 5.7 5.0 2.0 3.2 0.3 min. grj55dr72j224kwj1l dc630 x7r (eia) 0.22 f 10% 5.7 5.0 2.0 3.2 0.3 min. grj31br73a471kwj1l dc1000 x7r (eia) 470pf 10% 3.2 1.6 1.25 1.2 0.3 min. grj31br73a102kwj1l dc1000 x7r (eia) 1000pf 10% 3.2 1.6 1.25 1.2 0.3 min. grj31br73a152kwj1l dc1000 x7r (eia) 1500pf 10% 3.2 1.6 1.25 1.2 0.3 min. grj31br73a222kwj1l dc1000 x7r (eia) 2200pf 10% 3.2 1.6 1.25 1.2 0.3 min. grj31br73a332kwj1l dc1000 x7r (eia) 3300pf 10% 3.2 1.6 1.25 1.2 0.3 min. grj31br73a472kwj1l dc1000 x7r (eia) 4700pf 10% 3.2 1.6 1.25 1.2 0.3 min. grj32qr73a682kwj1l dc1000 x7r (eia) 6800pf 10% 3.2 2.5 1.5 1.2 0.3 min. grj32qr73a103kwj1l dc1000 x7r (eia) 10000pf 10% 3.2 2.5 1.5 1.2 0.3 min. grj32dr73a153kwj1l dc1000 x7r (eia) 15000pf 10% 3.2 2.5 2.0 1.2 0.3 min. grj32dr73a223kwj1l dc1000 x7r (eia) 22000pf 10% 3.2 2.5 2.0 1.2 0.3 min. grj43dr73a333kwj1l dc1000 x7r (eia) 33000pf 10% 4.5 3.2 2.0 2.2 0.3 min. grj43dr73a473kwj1l dc1000 x7r (eia) 47000pf 10% 4.5 3.2 2.0 2.2 0.3 min. grj55dr73a104kwj1l dc1000 x7r (eia) 0.10 f 10% 5.7 5.0 2.0 3.2 0.3 min. for general purpose grm/grj series only for applications ac250v type ga2 series safety standard certified ga3 series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
continued on the following page. step temperature ( c) 25 2 min. operating temp. 3 25 2 max. operating temp. 2 25 2 1 2 3 4 5 rated voltage test voltage 200% of the rated voltage 150% of the rated voltage 120% of the rated voltage dc250v dc630v dc1kv * "room condition" temperature: 15 to 35 c, relative humidity: 45 to 75%, atmospheric pressure: 86 to 106kpa solder the capacitor to the test jig (glass epoxy board). the capacitor should be subjected to a simple harmonic motion having a total amplitude of 1.5mm, the frequency being varied uniformly between the approximate limits of 10 and 55hz. the frequency range, from 10 to 55hz and return to 10hz, should be traversed in approximately 1 min. this motion should be applied for a period of 2 hrs. in each of 3 mutually perpendicular directions (total of 6 hrs.). 10 vibration resistance appearance no defects or abnormalities capacitance within the specified tolerance d.f. 0.025 max. solder the capacitor to the testing jig (glass epoxy board) shown in fig. 1. then apply 10n force in the direction of the arrow. the soldering should be done using the reflow method and should be conducted with care so that the soldering is uniform and free of defects such as heat shock. fig. 1 9 adhesive strength of termination no removal of the terminations or other defect should occur. the capacitance measurement should be made at each step specified in the table. ?retreatment perform a heat treatment at 150 +0 ?0 c for 60 5 min. and then let sit for 24 2 hrs. at room condition.* 8 capacitance temperature characteristics cap. change within 15% (temp. range: ?5 to +125 c) 7 dissipation factor (d.f.) 0.025 max. the capacitance/d.f. should be measured at a frequency of 1 0.2khz and a voltage of ac1 0.2v(r.m.s.) 6 capacitance within the specified tolerance the insulation resistance should be measured with dc500 50v (dc250 25v in case of rated voltage: dc250v) and within 60 5 sec. of charging. 5 insulation resistance (i.r.) c u 0.01 f: more than 100m ? f c f 0.01 f: more than 10,000m ? no failure should be observed when voltage in the table is applied between the terminations for 1 to 5 sec., provided the charge/discharge current is less than 50ma. 4 dielectric strength no defects or abnormalities using calipers and micrometers 3 dimensions within the specified dimensions visual inspection 2 appearance no defects or abnormalities 1 operating temperature range ?5 to +125 c no. test method specifications item solder resist cu glass epoxy board 10n, 10 t 1s glass epoxy board medium voltage soft termination type grj series specifications and test methods grj series specifications and test methods 173 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. for general purpose grm/grj series only for applications ac250v type ga2 series safety standard certified ga3 series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
continued from the preceding page. continued on the following page. * "room condition" temperature: 15 to 35 ? c, relative humidity: 45 to 75%, atmospheric pressure: 86 to 106kpa let the capacitor sit at 40 2 ? c and relative humidity of 90 to 95% for 500 +24 e0 hrs. remove and let sit for 24 2 hrs. at room condition,* then measure. ?retreatment perform a heat treatment at 150 +0 ?0 c for 60 5 min. and then let sit for 24 2 hrs. at room condition.* 15 humidity (steady state) appearance no marking defects capacitance change within 15% d.f. 0.05 max. i.r. c u 0.01 f: more than 10m ? f c f 0.01 f: more than 1,000m ? dielectric strength in accordance with item no.4 fix the capacitor to the supporting jig (glass epoxy board) shown in fig. 4. perform the 5 cycles according to the 4 heat treatments listed in the following table. let sit for 24 2 hrs. at room condition,* then measure. ?retreatment perform a heat treatment at 150 +0 ?0 c for 60 5 min. and then let sit for 24 2 hrs. at room condition.* fig. 4 14 temperature cycle appearance no marking defects capacitance change within 7.5% d.f. 0.025 max. i.r. c u 0.01 f: more than 100m ? f c f 0.01 f: more than 10,000m ? dielectric strength in accordance with item no.4 preheat the capacitor at 120 to 150 c * for 1 min. immerse the capacitor in solder solution at 260 5 ? c for 10 1 sec. let sit at room condition* for 24 2 hrs., then measure. ?mmersing speed: 25 2.5mm/s ?retreatment perform a heat treatment at 150 +0 ?0 c for 60 5 min. and then let sit for 24 2 hrs. at room condition.* * preheating for more than 3.2 z 2.5mm 13 resistance to soldering heat appearance no marking defects capacitance change within 10% d.f. 0.025 max. i.r. c u 0.01 f: more than 100m ? f c f 0.01 f: more than 10,000m ? dielectric strength in accordance with item no.4 immerse the capacitor in a solution of ethanol (jis-k-8101) and rosin (jis-k-5902) (25% rosin in weight proportion). immerse in solder solution for 2 0.5 sec. immersing speed: 25 2.5mm/s temp. of solder: 245 5 c lead free solder (sn-3.0ag-0.5cu) 235 5 c h60a or h63a eutectic solder 12 solderability of termination 75% of the terminations are to be soldered evenly and continuously. solder the capacitor to the testing jig (glass epoxy board) shown in fig. 2. then apply a force in the direction shown in fig. 3. the soldering should be done using the reflow method and should be conducted with care so that the soldering is uniform and free of defects such as heat shock. (in mm) fig. 3 11 deflection no marking defects within 12.5% fig. 2 appearance capacitance change no. test method specifications item s t x ? t b q r s t u v w z z ] ^ _ | ? ? ?
t w xy z [ \] _ ` ?a ? ? -? z ^ _ ?
z [ _ ? ? a ^ _ _ c q t s w x ? 100 t w x ? y z ] a ? ? 40 f 4.5 t : 1.6 d capacitance meter flexure=3 20 50 r230 45 45 pressurizing speed: 1.0mm/s pressurize l z w (mm) dimension (mm) a 1.2 2.2 2.2 3.5 4.5 b 4.0 5.0 5.0 7.0 8.0 c 1.65 2.0 2.9 3.7 5.6 d 1.0 2.0 z 1.25 3.2 z 1.6 3.2 z 2.5 4.5 z 3.2 5.7 z 5.0 step temperature 100 to 120 c 170 to 200 c time 1 min. 1 min. 1 2 step temperature ( c) min. operating temp. 3 room temp. max. operating temp. 2 room temp. time (min.) 30 3 2 to 3 30 3 2 to 3 1 2 3 4 solder resist cu glass epoxy board medium voltage soft termination type grj series specifications and test methods grj series specifications and test methods 174 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. for general purpose grm/grj series only for applications ac250v type ga2 series safety standard certified ga3 series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
continued from the preceding page. * "room condition" temperature: 15 to 35 ? c, relative humidity: 45 to 75%, atmospheric pressure: 86 to 106kpa apply the rated voltage at 40 2 ? c and relative humidity of 90 to 95% for 500 +24 e0 hrs. remove and let sit for 24 2 hrs. at room condition,* then measure. ?retreatment apply test voltage for 60 5 min. at test temperature. remove and let sit for 24 2 hrs. at room condition.* 17 humidity loading (application: dc250v, dc630v item) appearance no marking defects capacitance change within 15% d.f. 0.05 max. i.r. c u 0.01 f: more than 10m ? f c f 0.01 f: more than 1,000m ? dielectric strength in accordance with item no.4 apply voltage as in table for 1,000 +48 ? hrs. at maximum operating temperature 3 c. remove and let sit for 24 2 hrs. at room condition,* then measure. the charge/discharge current is less than 50ma. ?retreatment apply test voltage for 60 5 min. at test temperature. remove and let sit for 24 2 hrs. at room condition.* 16 life appearance no marking defects capacitance change within 15% (rated voltage: dc250v, dc630v) within 20% (rated voltage: dc1kv) d.f. 0.05 max. i.r. c u 0.01 f: more than 10m ? f c f 0.01 f: more than 1,000m ? dielectric strength in accordance with item no.4 no. test method specifications item medium voltage soft termination type grj series specifications and test methods rated voltage applied voltage 150% of the rated voltage 120% of the rated voltage 110% of the rated voltage dc250v dc630v dc1kv grj series specifications and test methods 175 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. for general purpose grm/grj series only for applications ac250v type ga2 series safety standard certified ga3 series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
for general purpose grm/grj series only for applications grm/dc3.15kv series ac250v type ga2 series safety standard certified ga3 series product information 176 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. chip monolithic ceramic capacitors (medium voltage) for lcd backlight inverter circuit grm/dc3.15kv series part number lw t dimensions (mm) e min. g min. 2.9 0.3 grm42a 2.0 0.2 4.5 0.3 l t w e e g 1.0 +0, - 0.3 part number rated voltage (v) tc code (standard) capacitance (pf) length l (mm) width w (mm) thickness t (mm) electrode g min. (mm) electrode e (mm) grm42a5c3f050dw01l dc3150 c0g (eia) 5.0 0.5pf 4.5 2.0 1.0 2.9 0.3 min. grm42a5c3f100jw01l dc3150 c0g (eia) 10 5% 4.5 2.0 1.0 2.9 0.3 min. grm42a5c3f120jw01l dc3150 c0g (eia) 12 5% 4.5 2.0 1.0 2.9 0.3 min. grm42a5c3f150jw01l dc3150 c0g (eia) 15 5% 4.5 2.0 1.0 2.9 0.3 min. grm42a5c3f180jw01l dc3150 c0g (eia) 18 5% 4.5 2.0 1.0 2.9 0.3 min. grm42a5c3f220jw01l dc3150 c0g (eia) 22 5% 4.5 2.0 1.0 2.9 0.3 min. grm42a5c3f270jw01l dc3150 c0g (eia) 27 5% 4.5 2.0 1.0 2.9 0.3 min. grm42a5c3f330jw01l dc3150 c0g (eia) 33 5% 4.5 2.0 1.0 2.9 0.3 min. grm42a5c3f390jw01l dc3150 c0g (eia) 39 5% 4.5 2.0 1.0 2.9 0.3 min. grm42a5c3f470jw01l dc3150 c0g (eia) 47 5% 4.5 2.0 1.0 2.9 0.3 min. n features 1. low-loss and suitable for high frequency circuits 2. murata's original internal electrode structure realizes high flash-over voltage. 3. a new monolithic structure for small, surface- mountable devices capable of operating at high voltage levels. 4. sn-plated external electrodes realize good solderability. 5. only for reflow soldering 6. capacitance values less than 22pf can be used in lcd backlight inverter circuits as long as the applied voltage, peak to peak, is less than 4.0kv at 100khz or less. n applications ideal for use as the ballast in lcd backlight inverter. do not use these products in any automotive power train or safety equipment including battery chargers for electric vehicles and plug-in hybrids. only murata products clearly stipulated as "for automotive use" can be used for automobile applications such as power train and safety equipment. ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
only for lcd backlight inverter circuit specifications and test methods continued on the following page. solder the capacitor to the testing jig (glass epoxy board) shown in fig. 2. then apply a force in the direction shown in fig. 3. the soldering should be done using the reflow method and should be conducted with care so that the soldering is uniform and free of defects such as heat shock. fig. 3 11 deflection no marking defects fig. 2 solder the capacitor to the test jig (glass epoxy board). the capacitor should be subjected to a simple harmonic motion having a total amplitude of 1.5mm, the frequency being varied uniformly between the approximate limits of 10 and 55hz. the frequency range, from 10 to 55hz and return to 10hz, should be traversed in approximately 1 min. this motion should be applied for a period of 2 hrs. in each of 3 mutually perpendicular directions (total of 6 hrs.). 10 vibration resistance appearance no defects or abnormalities capacitance within the specified tolerance q 1,000 min. solder the capacitor to the testing jig (glass epoxy board) shown in fig. 1. then apply 10n force in the direction of the arrow. the soldering should be done using the reflow method and should be conducted with care so that the soldering is uniform and free of defects such as heat shock. fig. 1 9 adhesive strength of termination no removal of the terminations or other defect should occur. the capacitance measurement should be made at each step specified in the table. 8 capacitance temperature characteristics temp. coefficient 0 t 30ppm/ d (temp. range: w 25 to w 125 d ) 0 w 30, y 72ppm/ d (temp. range: y 55 to w 25 d ) 7q 1,000 min. the capacitance/q should be measured at a frequency of 1 t 0.2mhz and a voltage of ac0.5 to 5v(r.m.s.) 6 capacitance within the specified tolerance the insulation resistance should be measured with dc500 t 50v and within 60 t 5 sec. of charging. 5 insulation resistance (i.r.) more than 10,000m no failure should be observed when dc4095v is applied between the terminations for 1 to 5 sec., provided the charge/ discharge current is less than 50ma. 4 dielectric strength no defects or abnormalities using calipers and micrometers 3 dimensions within the specified dimension visual inspection 2 appearance no defects or abnormalities y 1 operating temperature range y 55 to w 125 d no. test method specifications item step temperature ( d ) 25 t 2 min. operating temp. t 3 25 t 2 max. operating temp. t 2 25 t 2 1 2 3 4 5 l z w (mm) a dimension (mm) 3.5 b 7.0 c 2.4 d 1.0 4.5 z 2.0 10n, 10 t 1s glass epoxy board solder resist cu glass epoxy board u y z | a ? u v z | ? b
s tu v w xy z [ \ _ ` | ?a ? ? - q r s tu v y ] ^ ` | a ? s t x ? t a t x ? u x | ? c v z ? y ] a ? 100 y z ] a ? ? r s 40 f 4.5 t : 1.6 d capacitance meter flexure=1 20 50 r230 45 45 (in mm) pressurizing speed: 1.0mm/s pressurize grm/dc3.15kv series specifications and test methods 177 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. for general purpose grm/grj series only for applications grm/dc3.15kv series ac250v type ga2 series safety standard certified ga3 series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
only for lcd backlight inverter circuit specifications and test methods continued from the preceding page. * "room condition" temperature: 15 to 35 d , relative humidity: 45 to 75%, atmospheric pressure: 86 to 106kpa apply 120% of the rated voltage for 1,000 w 48 y 0 hrs. at maximum operating temperature t 3 d . remove and let sit for 24 t 2 hrs. at room condition,* then measure. the charge/discharge current is less than 50ma. 16 life appearance no marking defects capacitance change within t 3.0% q 350 min. i.r. more than 1,000m dielectric strength in accordance with item no.4 let the capacitor sit at 40 t 2 d and relative humidity of 90 to 95% for 500 w 24 y 0 hrs. remove and let sit for 24 t 2 hrs. at room condition,* then measure. 15 humidity (steady state) appearance no marking defects capacitance change within t 5.0% q 350 min. i.r. more than 1,000m dielectric strength in accordance with item no.4 fix the capacitor to the supporting jig (glass epoxy board) shown in fig. 4. perform the 5 cycles according to the 4 heat treatments listed in the following table. let sit for 24 t 2 hrs. at room condition,* then measure. fig. 4 14 temperature cycle appearance no marking defects capacitance change within t 2.5% q 1,000 min. i.r. more than 10,000m dielectric strength in accordance with item no.4 preheat the capacitor as in table. immerse the capacitor in solder solution at 260 t 5 d for 10 t 1 sec. let sit at room condition* for 24 t 2 hrs., then measure. # immersing speed : 25 t 2.5mm/s * preheating 13 resistance to soldering heat appearance no marking defects capacitance change within t 2.5% q 1,000 min. i.r. more than 10,000m dielectric strength in accordance with item no.4 immerse the capacitor in a solution of ethanol (jis-k-8101) and rosin (jis-k-5902) (25% rosin in weight proportion). immerse in solder solution for 2 t 0.5 sec. immersing speed: 25 t 2.5mm/s temp. of solder: 245 t 5 ? c lead free solder (sn-3.0ag-0.5cu) 235 t 5 ? c h60a or h63a eutectic solder 12 solderability of termination 75% of the terminations are to be soldered evenly and continuously. no. test method specifications item step temperature 100 to 120 d 170 to 200 d time 1 min. 1 min. 1 2 step temperature ( d ) min. operating temp. t 3 room temp. max. operating temp. t 2 room temp. time (min.) 30 t 3 2 to 3 30 t 3 2 to 3 1 2 3 4 solder resist cu glass epoxy board grm/dc3.15kv series specifications and test methods 178 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. for general purpose grm/grj series only for applications grm/dc3.15kv series ac250v type ga2 series safety standard certified ga3 series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
for general purpose grm/grj series only for applications gr4 series ac250v type ga2 series safety standard certified ga3 series product information 179 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. chip monolithic ceramic capacitors (medium voltage) for information devices gr4 series n features 1. these items are designed specifically for telecommunications devices (ieee802.3) in ethernet lan and primary-secondary coupling for dc-dc converters. 2. a new monolithic structure for small, high capacitance capable of operating at high voltage levels 3. sn-plated external electrodes realize good solderability. 4. only for reflow soldering n applications 1. ideal for use on telecommunications devices in ethernet lan 2. ideal for use as primary-secondary coupling for dc-dc converters do not use these products in any automotive power train or safety equipment including battery charger for electric vehicles and plug-in hybrid. only murata products clearly stipulated as "for automotive use" can be used for automobile applications such as power train and safety equipment.
only for information devices specifications and test methods continued on the following page. * "room condition" temperature: 15 to 35 d , relative humidity: 45 to 75%, atmospheric pressure: 86 to 106kpa solder the capacitor to the test jig (glass epoxy board). the capacitor should be subjected to a simple harmonic motion having a total amplitude of 1.5mm, the frequency being varied uniformly between the approximate limits of 10 and 55hz. the frequency range, from 10 to 55hz and return to 10hz, should be traversed in approximately 1 min. this motion should be applied for a period of 2 hrs. in each of 3 mutually perpendicular directions (total of 6 hrs.). 11 vibration resistance appearance no defects or abnormalities capacitance within the specified tolerance d.f. 0.025 max. solder the capacitor to the testing jig (glass epoxy board) shown in fig. 1. then apply 10n force in the direction of the arrow. the soldering should be done using the reflow method and should be conducted with care so that the soldering is uniform and free of defects such as heat shock. fig. 1 10 adhesive strength of termination no removal of the terminations or other defect should occur. the capacitance measurement should be made at each step specified in the table. # pretreatment perform a heat treatment at 150 w 0 y 10 d for 60 t 5 min. and then let sit for 24 t 2 hrs. at room condition.* 9 capacitance temperature characteristics cap. change within t 15% (temp. range: y 55 to w 125 d ) 8 dissipation factor (d.f.) 0.025 max. the capacitance/d.f. should be measured at a frequency of 1 t 0.2khz and a voltage of ac1 t 0.2v(r.m.s.) 7 capacitance within the specified tolerance the insulation resistance should be measured with dc500 t 50v and within 60 t 5 sec. of charging. 6 insulation resistance (i.r.) more than 6,000m 10 impulses of alternating polarity are subjected. (5 impulses for each polarity) the interval between impulses is 60 sec. applied pulse: 1.2/50 s applied voltage: 2.5kvo-p 5 pulse voltage no self healing breakdowns or flash-overs have taken place in the capacitor. no failure should be observed when voltage in the table is applied between the terminations, provided the charge/discharge current is less than 50ma. 4 dielectric strength no defects or abnormalities using calipers and micrometers 3 dimensions within the specified dimensions visual inspection 2 appearance no defects or abnormalities y 1 operating temperature range y 55 to w 125 d no. test method specifications item rated voltage test voltage 120% of the rated voltage ac1500v(r.m.s.) time 60 t 1 sec. 60 t 1 sec. dc2kv step temperature ( d ) 25 t 2 min. operating temp. t 3 25 t 2 max. operating temp. t 2 25 t 2 1 2 3 4 5 10n, 10 t 1s glass epoxy board solder resist cu glass epoxy board gr4 series specifications and test methods 180 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. for general purpose grm/grj series only for applications gr4 series ac250v type ga2 series safety standard certified ga3 series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
only for information devices specifications and test methods continued from the preceding page. continued on the following page. * "room condition" temperature: 15 to 35 d , relative humidity: 45 to 75%, atmospheric pressure: 86 to 106kpa let the capacitor sit at 40 t 2 d and relative humidity of 90 to 95% for 500 w 24 y 0 hrs. remove and let sit for 24 t 2 hrs. at room condition,* then measure. # pretreatment perform a heat treatment at 150 w 0 y 10 d for 60 t 5 min. and then let sit for 24 t 2 hrs. at room condition.* 16 humidity (steady state) appearance no marking defects capacitance change within t 15% d.f. 0.05 max. i.r. more than 1,000m dielectric strength in accordance with item no.4 fix the capacitor to the supporting jig (glass epoxy board) shown in fig. 4. perform the 5 cycles according to the 4 heat treatments listed in the following table. let sit for 24 t 2 hrs. at room condition,* then measure. # pretreatment perform a heat treatment at 150 w 0 y 10 d for 60 t 5 min. and then let sit for 24 t 2 hrs. at room condition.* fig. 4 15 temperature cycle appearance no marking defects capacitance change within t 15% d.f. 0.05 max. i.r. more than 3,000m dielectric strength in accordance with item no.4 preheat the capacitor as in table. immerse the capacitor in solder solution at 260 t 5 d for 10 t 1 sec. let sit at room condition* for 24 t 2 hrs., then measure. # immersing speed : 25 t 2.5mm/s # pretreatment perform a heat treatment at 150 w 0 y 10 d for 60 t 5 min. and then let sit for 24 t 2 hrs. at room condition.* * preheating 14 resistance to soldering heat appearance no marking defects capacitance change within t 10% d.f. 0.025 max. i.r. more than 1,000m dielectric strength in accordance with item no.4 immerse the capacitor in a solution of ethanol (jis-k-8101) and rosin (jis-k-5902) (25% rosin in weight proportion). immerse in solder solution for 2 t 0.5 sec. immersing speed: 25 t 2.5mm/s temp. of solder: 245 t 5 ? c lead free solder (sn-3.0ag-0.5cu) 235 t 5 ? c h60a or h63a eutectic solder 13 solderability of termination 75% of the terminations are to be soldered evenly and continuously. solder the capacitor to the testing jig (glass epoxy board) shown in fig. 2. then apply a force in the direction shown in fig. 3. the soldering should be done using the reflow method and should be conducted with care so that the soldering is uniform and free of defects such as heat shock. fig. 3 12 deflection no marking defects fig. 2 no. test method specifications item l z w (mm) a dimension (mm) 3.5 3.5 4.5 b 7.0 7.0 8.0 c 2.4 3.7 5.6 d 1.0 4.5 z 2.0 4.5 z 3.2 5.7 z 5.0 step temperature 100 to 120 d 170 to 200 d time 1 min. 1 min. 1 2 step temperature ( d ) min. operating temp. t 3 room temp. max. operating temp. t 2 room temp. time (min.) 30 t 3 2 to 3 30 t 3 2 to 3 1 2 3 4 solder resist cu glass epoxy board tu x | ? q u | b
r s t u v w x z [ | ? ? ? q t y \] ^ _ ` a -? s t s t _ a s t s t c q u v | xy \ ?a - 100 y a ] ^ ? 40 f 4.5 t : 1.6 d capacitance meter flexure=1 20 50 r230 45 45 (in mm) pressurizing speed: 1.0mm/s pressurize gr4 series specifications and test methods 181 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. for general purpose grm/grj series only for applications gr4 series ac250v type ga2 series safety standard certified ga3 series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
only for information devices specifications and test methods continued from the preceding page. * "room condition" temperature: 15 to 35 d , relative humidity: 45 to 75%, atmospheric pressure: 86 to 106kpa apply 110% of the rated voltage for 1,000 w 48 y 0 hrs. at maximum operating temperature t 3 d . remove and let sit for 24 t 2 hrs. at room condition,* then measure. the charge/discharge current is less than 50ma. # pretreatment apply test voltage for 60 t 5 min. at test temperature. remove and let sit for 24 t 2 hrs. at room condition.* 17 life appearance no marking defects capacitance change within t 20% d.f. 0.05 max. i.r. more than 2,000m dielectric strength in accordance with item no.4 no. test method specifications item gr4 series specifications and test methods 182 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. for general purpose grm/grj series only for applications gr4 series ac250v type ga2 series safety standard certified ga3 series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
for general purpose grm/grj series only for applications gr7 series ac250v type ga2 series safety standard certified ga3 series product information 183 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. chip monolithic ceramic capacitors (medium voltage) for camera flash circuit gr7 series n features 1. suitable for the trigger of the flash circuit, because real capacitance is stable during operating voltage. 2. the thin type fits thinner cameras. 3. sn-plated external electrodes realize good solderability. 4. for flow and reflow soldering n applications for strobe circuit do not use these products in any automotive power train or safety equipment including battery chargers for electric vehicles and plug-in hybrids. only murata products clearly stipulated as "for automotive use" can be used for automobile applications such as power train and safety equipment.
only for camera flash circuit specifications and test methods continued on the following page. * "room condition" temperature: 15 to 35 d , relative humidity: 45 to 75%, atmospheric pressure: 86 to 106kpa 10n, 10 t 1s glass epoxy board solder resist cu glass epoxy board step temperature ( d ) 25 t 2 min. operating temp. t 3 25 t 2 max. operating temp. t 2 25 t 2 1 2 3 4 5 solder the capacitor to the test jig (glass epoxy board). the capacitor should be subjected to a simple harmonic motion having a total amplitude of 1.5mm, the frequency being varied uniformly between the approximate limits of 10 and 55hz. the frequency range, from 10 to 55hz and return to 10hz, should be traversed in approximately 1 min. this motion should be applied for a period of 2 hrs. in each of 3 mutually perpendicular directions (total of 6 hrs.). 10 vibration resistance appearance no defects or abnormalities capacitance within the specified tolerance d.f. 0.025 max. solder the capacitor to the testing jig (glass epoxy board) shown in fig. 1. then apply 10n force in the direction of the arrow. the soldering should be done using the reflow method and should be conducted with care so that the soldering is uniform and free of defects such as heat shock. fig. 1 9 adhesive strength of termination no removal of the terminations or other defect should occur. the capacitance measurement should be made at each step specified in the table. # pretreatment perform a heat treatment at 150 w 0 y 10 d for 60 t 5 min. and then let sit for 24 t 2 hrs. at room condition.* 8 capacitance temperature characteristics cap. change within t 10% (apply dc350v bias) within w 22 y 33 % (no dc bias) (temp. range : y 55 to w 125 d ) 7 dissipation factor (d.f.) 0.025 max. the capacitance/d.f. should be measured at a frequency of 1 t 0.2khz and a voltage of ac1 t 0.2v(r.m.s.) 6 capacitance within the specified tolerance the insulation resistance should be measured with dc250 t 50v and within 60 t 5 sec. of charging. 5 insulation resistance (i.r.) c u 0.01 f: more than 100m ? f c f 0.01 f: more than 10,000m ? no failure should be observed when dc500v is applied between the terminations for 1 to 5 sec., provided the charge/discharge current is less than 50ma. 4 dielectric strength no defects or abnormalities using calipers and micrometers 3 dimensions within the specified dimensions visual inspection 2 appearance no defects or abnormalities y 1 operating temperature range y 55 to w 125 d no. test method specifications item gr7 series specifications and test methods 184 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. for general purpose grm/grj series only for applications gr7 series ac250v type ga2 series safety standard certified ga3 series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
only for camera flash circuit specifications and test methods continued from the preceding page. continued on the following page. * "room condition" temperature: 15 to 35 d , relative humidity: 45 to 75%, atmospheric pressure: 86 to 106kpa let the capacitor sit at 40 t 2 d and relative humidity of 90 to 95% for 500 w 24 y 0 hrs. remove and let sit for 24 t 2 hrs. at room condition,* then measure. # pretreatment perform a heat treatment at 150 w 0 y 10 d for 60 t 5 min. and then let sit for 24 t 2 hrs. at room condition.* 15 humidity (steady state) appearance no marking defects capacitance change within t 15% d.f. 0.05 max. i.r. c u 0.01 f: more than 10m ? f c f 0.01 f: more than 1,000m ? dielectric strength in accordance with item no.4 fix the capacitor to the supporting jig (glass epoxy board) shown in fig. 4. perform the 5 cycles according to the 4 heat treatments listed in the following table. let sit for 24 t 2 hrs. at room condition,* then measure. # pretreatment perform a heat treatment at 150 w 0 y 10 d for 60 t 5 min. and then let sit for 24 t 2 hrs. at room condition.* fig. 4 14 temperature cycle appearance no marking defects capacitance change within t 7.5% d.f. 0.025 max. i.r. c u 0.01 f: more than 100m ? f c f 0.01 f: more than 10,000m ? dielectric strength in accordance with item no.4 preheat the capacitor at 120 to 150 d for 1 min. immerse the capacitor in solder solution at 260 t 5 d for 10 t 1 sec. let sit at room condition* for 24 t 2 hrs., then measure. # immersing speed : 25 t 2.5mm/s # pretreatment perform a heat treatment at 150 w 0 y 10 d for 60 t 5 min. and then let sit for 24 t 2 hrs. at room condition.* 13 resistance to soldering heat appearance no marking defects capacitance change within t 10% d.f. 0.025 max. i.r. c u 0.01 f: more than 100m ? f c f 0.01 f: more than 10,000m ? dielectric strength in accordance with item no.4 solder resist cu glass epoxy board w x \ ? - q tu | b
r s u v w x z [ | ? ? ? q t y \] ^ _ ` a -? s t s t _ a s t s t c q u v | x \ ? - 100 y \ a - ] ^ ? 40 f 4.5 t : 1.6 d capacitance meter flexure=1 (in mm) 20 50 r230 45 45 pressurizing speed: 1.0mm/s pressurize step temperature ( d ) min. operating temp. t 3 room temp. max. operating temp. t 2 room temp. time (min.) 30 t 3 2 to 3 30 t 3 2 to 3 1 2 3 4 l z w (mm) a dimension (mm) 1.2 2.2 b 4.0 5.0 c 1.65 2.0 d 1.0 2.0 z 1.25 3.2 z 1.6 immerse the capacitor in a solution of ethanol (jis-k-8101) and rosin (jis-k-5902) (25% rosin in weight proportion). immerse in solder solution for 2 t 0.5 sec. immersing speed: 25 t 2.5mm/s temp. of solder: 245 t 5 ? c lead free solder (sn-3.0ag-0.5cu) 235 t 5 ? c h60a or h63a eutectic solder 12 solderability of termination 75% of the terminations are to be soldered evenly and continuously. solder the capacitor to the testing jig (glass epoxy board) shown in fig. 2. then apply a force in the direction shown in fig. 3. the soldering should be done using the reflow method and should be conducted with care so that the soldering is uniform and free of defects such as heat shock. fig. 3 11 deflection no marking defects fig. 2 no. test method specifications item gr7 series specifications and test methods 185 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. for general purpose grm/grj series only for applications gr7 series ac250v type ga2 series safety standard certified ga3 series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
only for camera flash circuit specifications and test methods continued from the preceding page. * "room condition" temperature: 15 to 35 d , relative humidity: 45 to 75%, atmospheric pressure: 86 to 106kpa apply the rated voltage at 40 t 2 d and relative humidity of 90 to 95% for 500 w 24 y 0 hrs. remove and let sit for 24 t 2 hrs. at room condition,* then measure. # pretreatment apply test voltage for 60 t 5 min. at test temperature. remove and let sit for 24 t 2 hrs. at room condition.* 17 humidity loading appearance no marking defects capacitance change within t 15% d.f. 0.05 max. i.r. c u 0.01 f: more than 10m ? f c f 0.01 f: more than 1,000m ? dielectric strength in accordance with item no.4 apply dc350v for 1,000 w 48 y 0 hrs. at maximum operating temperature t 3 d . remove and let sit for 24 t 2 hrs. at room condition,* then measure. the charge/discharge current is less than 50ma. # pretreatment apply test voltage for 60 t 5 min. at test temperature. remove and let sit for 24 t 2 hrs. at room condition.* 16 life appearance no marking defects capacitance change within t 15% d.f. 0.05 max. i.r. c u 0.01 f: more than 10m ? f c f 0.01 f: more than 1,000m ? dielectric strength in accordance with item no.4 no. test method specifications item gr7 series specifications and test methods 186 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. for general purpose grm/grj series only for applications gr7 series ac250v type ga2 series safety standard certified ga3 series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
for general purpose grm/grj series only for applications ac250v type ga2 series safety standard certified ga3 series product information 187 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. chip monolithic ceramic capacitors ac250v type (which meet japanese law) ga2 series n features 1. chip monolithic ceramic capacitor for ac lines. 2. a new monolithic structure for small, high capacitance capable of operating at high voltage levels. 3. sn-plated external electrodes realize good solderability. 4. only for reflow soldering 5. capacitance 0.01 to 0.1uf for connecting lines and 470 to 4700pf for connecting lines to earth. n applications noise suppression filters for switching power supplies, telephones, facsimiles, modems. do not use these products in any automotive power train or safety equipment including battery chargers for electric vehicles and plug-in hybrids. only murata products clearly stipulated as "for automotive use" can be used for automobile applications such as power train and safety equipment. n reference standard ga2 series obtains no safety approval. this series is based on the standards of the electrical appliance and material safety law of japan (separated table 4). part number lw t dimensions (mm) g min. e min. 2.0 0.2 ga242q 2.5 3.2 0.3 4.5 0.3 1.5 +0, -0.3 3.2 0.3 ga243d 4.5 0.4 2.0 +0, -0.3 ga243q 1.5 +0, -0.3 5.0 0.4 ga255d 5.7 0.4 2.0 +0, -0.3 l t w e e g part number rated voltage (v) tc code (standard) capacitance length l (mm) width w (mm) thickness t (mm) electrode g min. (mm) electrode e (mm) ga242qr7e2471mw01l ac250 (r.m.s.) x7r (eia) 470pf 20% 4.5 2.0 1.5 2.5 0.3 min. ga242qr7e2102mw01l ac250 (r.m.s.) x7r (eia) 1000pf 20% 4.5 2.0 1.5 2.5 0.3 min. ga243qr7e2222mw01l ac250 (r.m.s.) x7r (eia) 2200pf 20% 4.5 3.2 1.5 2.5 0.3 min. ga243qr7e2332mw01l ac250 (r.m.s.) x7r (eia) 3300pf 20% 4.5 3.2 1.5 2.5 0.3 min. ga243dr7e2472mw01l ac250 (r.m.s.) x7r (eia) 4700pf 20% 4.5 3.2 2.0 2.5 0.3 min. ga243qr7e2103mw01l ac250 (r.m.s.) x7r (eia) 10000pf 20% 4.5 3.2 1.5 2.5 0.3 min. ga243qr7e2223mw01l ac250 (r.m.s.) x7r (eia) 22000pf 20% 4.5 3.2 1.5 2.5 0.3 min. ga243dr7e2473mw01l ac250 (r.m.s.) x7r (eia) 47000pf 20% 4.5 3.2 2.0 2.5 0.3 min. ga255dr7e2104mw01l ac250 (r.m.s.) x7r (eia) 0.10 f 20% 5.7 5.0 2.0 3.2 0.3 min. ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
ac250v(r.m.s.) type (which meet japanese law) specifications and test methods continued on the following page. * "room condition" temperature: 15 to 35 d , relative humidity: 45 to 75%, atmospheric pressure: 86 to 106kpa solder the capacitor to the test jig (glass epoxy board). the capacitor should be subjected to a simple harmonic motion having a total amplitude of 1.5mm, the frequency being varied uniformly between the approximate limits of 10 and 55hz. the frequency range, from 10 to 55hz and return to 10hz, should be traversed in approximately 1 min. this motion should be applied for a period of 2 hrs. in each of 3 mutually perpendicular directions (total of 6 hrs.). 11 vibration resistance appearance no defects or abnormalities capacitance within the specified tolerance d.f. 0.025 max. solder the capacitor to the testing jig (glass epoxy board) shown in fig. 1. then apply 10n force in the direction of the arrow. the soldering should be done using the reflow method and should be conducted with care so that the soldering is uniform and free of defects such as heat shock. fig. 1 10 adhesive strength of termination no removal of the terminations or other defects should occur. as in fig., discharge is made 50 times at 5 sec. intervals from the capacitor (cd) charged at dc voltage of specified. ct: capacitor under test cd: 0.001 f r1: 1,000 r2: 100m r3: surge resistance 9 discharge test (application: nominal capacitance c f 10,000pf) appearance no defects or abnormalities the capacitance measurement should be made at each step specified in the table. # pretreatment perform a heat treatment at 150 w 0 y 10 d for 60 t 5 min. and then let sit for 24 t 2 hrs. at room condition.* 8 capacitance temperature characteristics cap. change within t 15% (temp. range: y 55 to w 125 d ) 7 dissipation factor (d.f.) 0.025 max. the capacitance/d.f. should be measured at a frequency of 1 t 0.2khz and a voltage of ac1 t 0.2v (r.m.s.) 6 capacitance within the specified tolerance the insulation resistance should be measured with dc500 t 50v and within 60 t 5 sec. of charging. 5 insulation resistance (i.r.) more than 2,000m no failure should be observed when voltage in the table is applied between the terminations for 60 t 1 sec., provided the charge/discharge current is less than 50ma. 4 dielectric strength no defects or abnormalities using calipers and micrometers 3 dimensions within the specified dimensions visual inspection 2 appearance no defects or abnormalities y 1 operating temperature range y 55 to w 125 d no. test method specifications item nominal capacitance test voltage ac575v (r.m.s.) ac1500v (r.m.s.) c u 10,000pf c f 10,000pf step temperature ( d ) 25 t 2 min. operating temp. t 3 25 t 2 max. operating temp. t 2 25 t 2 1 2 3 4 5 10n, 10 t 1s glass epoxy board solder resist cu glass epoxy board r3 r1 r2 ct cd 10kv v ga2 series specifications and test methods 188 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. for general purpose grm/grj series only for applications ac250v type ga2 series safety standard certified ga3 series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
ac250v(r.m.s.) type (which meet japanese law) specifications and test methods continued from the preceding page. continued on the following page. * "room condition" temperature: 15 to 35 d , relative humidity: 45 to 75%, atmospheric pressure: 86 to 106kpa fix the capacitor to the supporting jig (glass epoxy board) shown in fig. 4. perform the 5 cycles according to the 4 heat treatments listed in the following table. let sit for 24 t 2 hrs. at room condition,* then measure. # pretreatment perform a heat treatment at 150 w 0 y 10 d for 60 t 5 min. and then let sit for 24 t 2 hrs. at room condition.* fig. 4 16 temperature cycle appearance no marking defects capacitance change within t 15% d.f. 0.05 max. i.r. more than 2,000m dielectric strength in accordance with item no.4 preheat the capacitor as in table. immerse the capacitor in solder solution at 260 t 5 d for 10 t 1 sec. let sit at room condition* for 24 t 2 hrs., then measure. # immersing speed : 25 t 2.5mm/s # pretreatment perform a heat treatment at 150 w 0 y 10 d for 60 t 5 min. and then let sit for 24 t 2 hrs. at room condition.* * preheating 15 resistance to soldering heat appearance no marking defects capacitance change within t 10% d.f. 0.025 max. i.r. more than 2,000m dielectric strength in accordance with item no.4 the capacitor should be subjected to 40 t 2 d , relative humidity of 90 to 98% for 8 hrs., and then removed in room condition* for 16 hrs. until 5 cycles. 14 humidity insulation appearance no marking defects capacitance change within t 15% d.f. 0.05 max. i.r. more than 1,000m dielectric strength in accordance with item no.4 immerse the capacitor in a solution of ethanol (jis-k-8101) and rosin (jis-k-5902) (25% rosin in weight proportion). immerse in solder solution for 2 t 0.5 sec. immersing speed: 25 t 2.5mm/s temp. of solder: 245 t 5 ? c lead free solder (sn-3.0ag-0.5cu) 235 t 5 ? c h60a or h63a eutectic solder 13 solderability of termination 75% of the terminations are to be soldered evenly and continuously. solder the capacitor to the testing jig (glass epoxy board) shown in fig. 2. then apply a force in the direction shown in fig. 3. the soldering should be done using the reflow method and should be conducted with care so that the soldering is uniform and free of defects such as heat shock. fig. 3 12 deflection no marking defects fig. 2 no. test method specifications item l z w (mm) a dimension (mm) 3.5 3.5 4.5 b 7.0 7.0 8.0 c 2.4 3.7 5.6 d 1.0 4.5 z 2.0 4.5 z 3.2 5.7 z 5.0 step temperature 100 to 120 d 170 to 200 d time 1 min. 1 min. 1 2 step temperature ( d ) min. operating temp. t 3 room temp. max. operating temp. t 2 room temp. time (min.) 30 t 3 2 to 3 30 t 3 2 to 3 1 2 3 4 solder resist cu glass epoxy board t x ? q u | b
r s t u v w x z [ | ? ? ? q t y \] ^ _ ` a -? s t s t _ a s t s t c q u v | x \ ? - 100 y a ] ^ ? 40 f 4.5 t : 1.6 d capacitance meter flexure=1 (in mm) 20 50 r230 45 45 pressurizing speed: 1.0mm/s pressurize ga2 series specifications and test methods 189 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. for general purpose grm/grj series only for applications ac250v type ga2 series safety standard certified ga3 series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
ac250v(r.m.s.) type (which meet japanese law) specifications and test methods continued from the preceding page. * "room condition" temperature: 15 to 35 d , relative humidity: 45 to 75%, atmospheric pressure: 86 to 106kpa apply the rated voltage at 40 t 2 d and relative humidity of 90 to 95% for 500 w 24 y 0 hrs. remove and let sit for 24 t 2 hrs. at room condition,* then measure. # pretreatment apply test voltage for 60 t 5 min. at test temperature. remove and let sit for 24 t 2 hrs. at room condition.* 19 humidity loading appearance no marking defects capacitance change within t 15% d.f. 0.05 max. i.r. more than 1,000m dielectric strength in accordance with item no.4 apply voltage and time as in table at maximum operating temperature t 3 d . remove and let sit for 24 t 2 hrs. at room condition,* then measure. the charge / discharge current is less than 50ma. * except that once each hour the voltage is increased to ac1,000v (r.m.s.) for 0.1 sec. # pretreatment apply test voltage for 60 t 5 min. at test temperature. remove and let sit for 24 t 2 hrs. at room condition.* 18 life appearance no marking defects capacitance change within t 20% d.f. 0.05 max. i.r. more than 1,000m dielectric strength in accordance with item no.4 let the capacitor sit at 40 t 2 d and relative humidity of 90 to 95% for 500 w 24 y 0 hrs. remove and let sit for 24 t 2 hrs. at room condition,* then measure. # pretreatment perform a heat treatment at 150 w 0 y 10 d for 60 t 5 min. and then let sit for 24 t 2 hrs. at room condition.* 17 humidity (steady state) appearance no marking defects capacitance change within t 15% d.f. 0.05 max. i.r. more than 1,000m dielectric strength in accordance with item no.4 no. test method specifications item nominal capacitance test time 1,000 w 48 y 0 hrs. 1,500 w 48 y 0 hrs. test voltage ac300v (r.m.s.) ac500v (r.m.s.) * c u 10,000pf c f 10,000pf ga2 series specifications and test methods 190 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. for general purpose grm/grj series only for applications ac250v type ga2 series safety standard certified ga3 series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
for general purpose grm/grj series only for applications ac250v type ga2 series safety standard certified ga3 series product information 191 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. chip monolithic ceramic capacitors safety standard certified ga3 series ul, iec60384-14 class x1/y2 type gc n features 1. chip monolithic ceramic capacitor (certified as conforming to safety standards) for ac lines. 2. a new monolithic structure for small, high capacitance capable of operating at high voltage levels. 3. compared to lead type capacitors, this new capacitor is greatly downsized and low-profiled to 1/10 or less in volume, and 1/4 or less in height. 4. type gc can be used as an x1-class and y2-class capacitor, line-by-pass capacitor of ul1414. 5. +125 degree c guaranteed 6. only for reflow soldering n applications 1. ideal for use as y capacitor or x capacitor for various switching power supplies 2. ideal for modem applications do not use these products in any automotive power train or safety equipment including battery chargers for electric vehicles and plug-in hybrids. only murata products clearly stipulated as "for automotive use" can be used for automobile applications such as power train and safety equipment. part number lt w dimensions (mm) g min. e min. 2.0 0.3 ga355d 5.7 0.4 4.0 0.3 5.0 0.4 l t w e e g n standard certification standard no. rated voltage class line by-pass ul vde bsi semko esti ul1414 iec 60384-14 en 60384-14 en 60065 (14.2) iec 60384-14 en 60384-14 iec 60384-14 en 60384-14 en 60065 iec 60384-14 ac250v (r.m.s.) x1, y2 part number rated voltage (v) tc code (standard) capacitance (pf) length l (mm) width w (mm) thickness t (mm) electrode g min. (mm) electrode e (mm) ga355dr7gc101ky02l ac250 (r.m.s.) x7r (eia) 100 10% 5.7 5.0 2.0 4.0 0.3 min. ga355dr7gc151ky02l ac250 (r.m.s.) x7r (eia) 150 10% 5.7 5.0 2.0 4.0 0.3 min. ga355dr7gc221ky02l ac250 (r.m.s.) x7r (eia) 220 10% 5.7 5.0 2.0 4.0 0.3 min. ga355dr7gc331ky02l ac250 (r.m.s.) x7r (eia) 330 10% 5.7 5.0 2.0 4.0 0.3 min. ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
for general purpose grm/grj series only for applications ac250v type ga2 series safety standard certified ga3 series product information 192 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. chip monolithic ceramic capacitors safety standard certified ga3 series iec60384-14 class y2, x1/y2 type gf n features 1. available for equipment based on iec/en60950 and ul1950. besides, the ga352/355 types are available for equipment based on iec/en60065, ul1492, and ul6500. 2. type gf can be used as a y2-class capacitor. 3. a new monolithic structure for small, high capacitance capable of operating at high voltage levels. 4. +125 degree c guaranteed 5. only for reflow soldering n applications 1. ideal for use on line filters and couplings for daa modems without transformers 2. ideal for use on line filters for information equipment 3. ideal for use as y capacitor or x capacitor for various switching power supplies (ga352/355 types only) do not use these products in any automotive power train or safety equipment including battery chargers for electric vehicles and plug-in hybrids. only murata products clearly stipulated as "for automotive use" can be used for automobile applications such as power train and safety equipment.
for general purpose grm/grj series only for applications ac250v type ga2 series safety standard certified ga3 series product information 193 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. part number rated voltage (v) tc code (standard) capacitance (pf) length l (mm) width w (mm) thickness t (mm) electrode g min. (mm) electrode e (mm) continued from the preceding page. ga352qr7gf152kw01l ac250 (r.m.s.) x7r (eia) 1500 10% 5.7 2.8 1.5 4.0 0.3 min. ga355qr7gf182kw01l ac250 (r.m.s.) x7r (eia) 1800 10% 5.7 5.0 1.5 4.0 0.3 min. ga355qr7gf222kw01l ac250 (r.m.s.) x7r (eia) 2200 10% 5.7 5.0 1.5 4.0 0.3 min. ga355qr7gf332kw01l ac250 (r.m.s.) x7r (eia) 3300 10% 5.7 5.0 1.5 4.0 0.3 min. ga355dr7gf472kw01l ac250 (r.m.s.) x7r (eia) 4700 10% 5.7 5.0 2.0 4.0 0.3 min. ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
for general purpose grm/grj series only for applications ac250v type ga2 series safety standard certified ga3 series product information 194 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. chip monolithic ceramic capacitors safety standard certified ga3 series iec60384-14 class y3 type gd n features 1. available for equipment based on iec/en60950 and ul1950. 2. type gd can be used as a y3-class capacitor. 3. a new monolithic structure for small, high capacitance capable of operating at high voltage levels. 4. +125 degree c guaranteed 5. only for reflow soldering n applications 1. ideal for use on line filters and couplings for daa modems without transformers 2. ideal for use on line filters for information equipment do not use these products in any automotive power train or safety equipment including battery chargers for electric vehicles and plug-in hybrids. only murata products clearly stipulated as "for automotive use" can be used for automobile applications such as power train and safety equipment.
for general purpose grm/grj series only for applications ac250v type ga2 series safety standard certified ga3 series product information 195 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. chip monolithic ceramic capacitors safety standard certified ga3 series iec60384-14 class x2 type gb n features 1. type gb can be used as an x2-class capacitor. 2. chip monolithic ceramic capacitor (certified as conforming to safety standards) for ac lines. 3. a new monolithic structure for small, high capacitance capable of operating at high voltage levels. 4. compared to lead type capacitors, this new capacitor is greatly downsized and low-profiled to 1/10 or less in volume, and 1/4 or less in height. 5. +125 degree c guaranteed 6. only for reflow soldering n applications ideal for use as x capacitor for various switching power supplies do not use these products in any automotive power train or safety equipment including battery chargers for electric vehicles and plug-in hybrids. only murata products clearly stipulated as "for automotive use" can be used for automobile applications such as power train and safety equipment. part number lt w dimensions (mm) g min. e min. 1.5 +0,-0.3 ga355d 5.7 0.4 3.0 0.3 5.0 0.4 2.0 +0,-0.3 2.5 +0,-0.3 2.9 +0,-0.4 ga355x ga355q ga355e l t w e e g n standard certification standard no. rated voltage class vde semko esti iec 60384-14 en 60384-14 ac250v (r.m.s.) x2 part number rated voltage (v) tc code (standard) capacitance (pf) length l (mm) width w (mm) thickness t (mm) electrode g min. (mm) electrode e (mm) ga355qr7gb103kw01l ac250 (r.m.s.) x7r (eia) 10000 10% 5.7 5.0 1.5 3.0 0.3 min. ga355qr7gb153kw01l ac250 (r.m.s.) x7r (eia) 15000 10% 5.7 5.0 1.5 3.0 0.3 min. ga355dr7gb223kw01l ac250 (r.m.s.) x7r (eia) 22000 10% 5.7 5.0 2.0 3.0 0.3 min. ga355er7gb333kw01l ac250 (r.m.s.) x7r (eia) 33000 10% 5.7 5.0 2.5 3.0 0.3 min. ga355er7gb473kw01l ac250 (r.m.s.) x7r (eia) 47000 10% 5.7 5.0 2.5 3.0 0.3 min. ga355xr7gb563kw06l ac250 (r.m.s.) x7r (eia) 56000 10% 5.7 5.0 2.9 3.0 0.3 min. ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
safety standard certified type gc/gd/gf/gb specifications and test methods continued on the following page. *1 "room condition" temperature: 15 to 35 d , relative humidity: 45 to 75%, atmospheric pressure: 86 to 106kpa *2 "c" expresses nominal capacitance value (pf). solder the capacitor to the testing jig (glass epoxy board) shown in fig. 1. then apply 10n force in the direction of the arrow. the soldering should be done using the reflow method and should be conducted with care so that the soldering is uniform and free of defects such as heat shock. fig. 1 11 adhesive strength of termination no removal of the terminations or other defect should occur. as in fig., discharge is made 50 times at 5 sec. intervals from the capacitor (cd) charged at dc voltage of specified. ct: capacitor under test cd: 0.001 f r1: 1,000 r2: 100m r3: surge resistance 10 discharge test (application: type gc) appearance no defects or abnormalities i.r. more than 1,000m dielectric strength in accordance with item no.4 the capacitance measurement should be made at each step specified in the table. sl char. : the capacitance should be measured at even 85 d between step 3 and step 4. # pretreatment for x7r char. perform a heat treatment at 150 w 0 y 10 d for 60 t 5 min. and then let sit for 24 t 2 hrs. at room condition.* 1 9 capacitance temperature characteristics temperature characteristic guarantee is y 55 to w 125 d temperature characteristic guarantee is w 20 to w 85 d 8 dissipation factor (d.f.) q the capacitance/q/d.f. should be measured at a frequency of 1 t 0.2khz (sl char.: 1 t 0.2mhz) and a voltage of ac1 t 0.2v (r.m.s.) 7 capacitance within the specified tolerance the insulation resistance should be measured with dc500 t 50v and within 60 t 5 sec. of charging. 6 insulation resistance (i.r.) more than 6,000m 10 impulses of alternating polarity are subjected. (5 impulses for each polarity) the interval between impulses is 60 sec. applied pulse: 1.2/50 s applied voltage: 2.5kvo-p 5 pulse voltage (application: type gd/gf) no self healing breakdowns or flash-overs have taken place in the capacitor. no failure should be observed when voltage in the table is applied between the terminations for 60 t 1 sec., provided the charge/discharge current is less than 50ma. 4 dielectric strength no defects or abnormalities using calipers and micrometers 3 dimensions within the specified dimensions visual inspection 2 appearance no defects or abnormalities y 1 operating temperature range y 55 to w 125 d no. test method specifications item test voltage dc1075v ac1500v (r.m.s.) ac2000v (r.m.s.) type gb type gc/gd type gf char. specification d.f. v 0.025 q u 400 w 20c* 2 (c f 30pf) q u 1000 (c u 30pf) x7r sl char. capacitance change within t 15% x7r char. temperature coefficient w 350 to y 1000ppm/ d sl step temperature ( d ) 25 t 2 (20 t 2 for sl char.) min. operating temp. t 3 25 t 2 (20 t 2 for sl char.) max. operating temp. t 2 25 t 2 (20 t 2 for sl char.) 1 2 3 4 5 10n, 10 t 1s glass epoxy board r3 r1 r2 ct cd 10kv v ga3 series specifications and test methods 196 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. for general purpose grm/grj series only for applications ac250v type ga2 series safety standard certified ga3 series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
safety standard certified type gc/gd/gf/gb specifications and test methods continued from the preceding page. continued on the following page. *1 "room condition" temperature: 15 to 35 d , relative humidity: 45 to 75%, atmospheric pressure: 86 to 106kpa *2 "c" expresses nominal capacitance value (pf). preheat the capacitor as in table. immerse the capacitor in solder solution at 260 t 5 d for 10 t 1 sec. let sit at room condition* 1 for 24 t 2 hrs., then measure. # immersing speed : 25 t 2.5mm/s # pretreatment for x7r char. perform a heat treatment at 150 w 0 y 10 d for 60 t 5 min. and then let sit for 24 t 2 hrs. at room condition.* 1 * preheating 15 resistance to soldering heat appearance no marking defects capacitance change i.r. more than 1,000m dielectric strength in accordance with item no.4 immerse the capacitor in a solution of ethanol (jis-k-8101) and rosin (jis-k-5902) (25% rosin in weight proportion). immerse in solder solution for 2 t 0.5 sec. immersing speed: 25 t 2.5mm/s temp. of solder: 245 t 5 ? c lead free solder (sn-3.0ag-0.5cu) 235 t 5 ? c h60a or h63a eutectic solder 14 solderability of termination 75% of the terminations are to be soldered evenly and continuously. solder the capacitor to the testing jig (glass epoxy board) shown in fig. 2. then apply a force in the direction shown in fig. 3. the soldering should be done using the reflow method and should be conducted with care so that the soldering is uniform and free of defects such as heat shock. fig. 3 13 deflection no marking defects fig. 2 solder the capacitor to the test jig (glass epoxy board). the capacitor should be subjected to a simple harmonic motion having a total amplitude of 1.5mm, the frequency being varied uniformly between the approximate limits of 10 and 55hz. the frequency range, from 10 to 55hz and return to 10hz, should be traversed in approximately 1 min. this motion should be applied for a period of 2 hrs. in each of 3 mutually perpendicular directions (total of 6 hrs.). 12 vibration resistance appearance no defects or abnormalities capacitance within the specified tolerance d.f. q no. test method specifications item char. specification d.f. v 0.025 q u 400 w 20c* 2 (c f 30pf) q u 1000 (c u 30pf) x7r sl l z w (mm) a dimension (mm) 3.5 3.5 4.5 4.5 b 7.0 7.0 8.0 8.0 c 2.4 3.7 3.2 5.6 d 1.0 4.5 z 2.0 4.5 z 3.2 5.7 z 2.8 5.7 z 5.0 char. capacitance change within t 10% within t 2.5% or t 0.25pf (whichever is larger) x7r sl step temperature 100 to 120 d 170 to 200 d time 1 min. 1 min. 1 2 solder resist cu glass epoxy board s ^ _
[ _ ` ? b q r tu y z ] ^ _ ` | a ? ?
s v w x z [ \ _ ? ? ? - u y z | a ? u v z | ? a z ^ ? z ^ ? c t _ ` r s w 100 s t w x \ ? - 40 f 4.5 t : 1.6 d capacitance meter flexure=1 20 50 r230 45 45 (in mm) pressurizing speed: 1.0mm/s pressurize ga3 series specifications and test methods 197 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. for general purpose grm/grj series only for applications ac250v type ga2 series safety standard certified ga3 series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
safety standard certified type gc/gd/gf/gb specifications and test methods continued from the preceding page. continued on the following page. *1 "room condition" temperature: 15 to 35 d , relative humidity: 45 to 75%, atmospheric pressure: 86 to 106kpa *2 "c" expresses nominal capacitance value (pf). before this test, the test shown in the following is performed. item 11 adhesive strength of termination (apply force is 5n) item 13 deflection impulse voltage each individual capacitor should be subjected to a 2.5kv (type gc/gf: 5kv) impulse (the voltage value means zero to peak) for three times. then the capacitors are applied to life test. apply voltage as in table for 1,000 hrs. at 125 w 2 y 0 d , relative humidity 50% max. let sit for 24 t 2 hrs. at room condition,* 1 then measure. # pretreatment for x7r char. perform a heat treatment at 150 w 0 y 10 d for 60 t 5 min. and then let sit for 24 t 2 hrs. at room condition.* 1 18 life appearance no marking defects capacitance change d.f. q i.r. more than 3,000m dielectric strength in accordance with item no.4 char. capacitance change within t 20% within t 3.0% or t 0.3pf (whichever is larger) x7r sl char. specification d.f. v 0.05 q u 275 w 5/2c* 2 (c f 30pf) q u 350 (c u 30pf) x7r sl before this test, the test shown in the following is performed. item 11 adhesive strength of termination (applied force is 5n) item 13 deflection let the capacitor sit at 40 t 2 d and relative humidity of 90 to 95% for 500 w 24 y 0 hrs. remove and let sit for 24 t 2 hrs. at room condition,* 1 then measure. # pretreatment for x7r char. perform a heat treatment at 150 w 0 y 10 d for 60 t 5 min. and then let sit for 24 t 2 hrs. at room condition.* 1 17 humidity (steady state) appearance no marking defects capacitance change d.f. q i.r. more than 3,000m dielectric strength in accordance with item no.4 char. capacitance change within t 15% within t 5.0% or t 0.5pf (whichever is larger) x7r sl char. specification d.f. v 0.05 q u 275 w 5/2c* 2 (c f 30pf) q u 350 (c u 30pf) x7r sl fix the capacitor to the supporting jig (glass epoxy board) shown in fig. 4. perform the 5 cycles according to the 4 heat treatments listed in the following table. let sit for 24 t 2 hrs. at room condition,* 1 then measure. # pretreatment for x7r char. perform a heat treatment at 150 w 0 y 10 d for 60 t 5 min. and then let sit for 24 t 2 hrs. at room condition.* 1 fig. 4 16 temperature cycle appearance no marking defects capacitance change d.f. q i.r. more than 3,000m dielectric strength in accordance with item no.4 char. capacitance change within t 15% within t 2.5% or t 0.25pf (whichever is larger) x7r sl char. specification d.f. v 0.05 q u 400 w 20c* 2 (c f 30pf) q u 1000 (c u 30pf) x7r sl no. test method specifications item step temperature ( d ) min. operating temp. t 3 room temp. max. operating temp. t 2 room temp. time (min.) 30 t 3 2 to 3 30 t 3 2 to 3 1 2 3 4 type applied voltage ac312.5v (r.m.s.), except that once each hour the voltage is increased to ac1,000v (r.m.s.) for 0.1 sec. ac425v (r.m.s.), except that once each hour the voltage is increased to ac1,000v (r.m.s.) for 0.1 sec. gb gc gf gd solder resist cu glass epoxy board front time (t 1 ) = 1.2 s=1.67t time to half-value (t 2 ) = 50 s t t t 2 t 1 0 30 50 90 (%) 100 ga3 series specifications and test methods 198 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. for general purpose grm/grj series only for applications ac250v type ga2 series safety standard certified ga3 series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
safety standard certified type gc/gd/gf/gb specifications and test methods continued from the preceding page. *1 "room condition" temperature: 15 to 35 d , relative humidity: 45 to 75%, atmospheric pressure: 86 to 106kpa *2 "c" expresses nominal capacitance value (pf). the capacitor under test should be held in the flame in the position which best promotes burning. each specimen should be exposed to the flame only once. time of exposure to flame: 30 sec. length of flame : 12 t 1mm gas burner : length 35mm min. inside dia. 0.5 t 0.1mm outside dia. 0.9mm max. gas : butane gas purity 95% min. 21 passive flammability the burning time should not exceed 30 sec. the tissue paper should not ignite. the capacitor should be individually wrapped in at least one but not more than two complete layers of cheesecloth. the capacitor should be subjected to 20 discharges. the interval between successive discharges should be 5 sec. the u ac should be maintained for 2 min. after the last discharge. c 1,2 : 1 f t 10% c 3 : 0.033 f t 5% 10kv l 1 to 4 : 1.5mh t 20% 16a rod core choke c t : 3 f t 5% 10kv r : 100 ? t 2% c x : capacitor under test u ac : u r t 5% f : fuse, rated 16a u r : rated voltage u t : voltage applied to c t 20 active flammability the cheesecloth should not be on fire. before this test, the test shown in the following is performed. ?tem 11 adhesive strength of termination (apply force is 5n) ?tem 13 deflection apply the rated voltage at 40 t 2 d and relative humidity of 90 to 95% for 500 w 24 y 0 hrs. remove and let sit for 24 t 2 hrs. at room condition,* 1 then measure. # pretreatment for x7r char. perform a heat treatment at 150 w 0 y 10 d for 60 t 5 min. and then let sit for 24 t 2 hrs. at room condition.* 1 19 humidity loading appearance no marking defects capacitance change d.f. q i.r. more than 3,000m dielectric strength in accordance with item no.4 no. test method specifications item char. capacitance change within t 15% within t 5.0% or t 0.5pf (whichever is larger) x7r sl char. specification d.f. v 0.05 q u 275 w 5/2c* 2 (c f 30pf) q u 350 (c u 30pf) x7r sl type ui 2.5kv 5kv gd, gb gc, gf u t c t c x c 3 c 2 l 1 l 3 l 2 r l 4 c 1 s 2 tr s 1 u ac f oscilloscope u x ui time about 8mm 200 t 5mm test specimen tissue about 10mm thick board 45 ? ga3 series specifications and test methods 199 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. for general purpose grm/grj series only for applications ac250v type ga2 series safety standard certified ga3 series product information ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
grm/grj/gr4/gr7/ga2/ga3 series reference data (typical example) 200 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. n capacitance - temperature characteristics c0g/u2j/sl characteristics cap. change (%) temperature ( c) - 20 0 5 10 - 60 - 40 - 20 0 20 40 60 80 100 120 140 - 15 - 10 - 5 15 20 c0g c0g sl sl u2j u2j x7r characteristics -30 -20 -10 0 10 20 30 -60 -40 -20 0 20 40 60 80 100 120 140 temperature ( c) cap. change (%) x7r char. spec.(upper) x7r char. spec.(lower) gr4 series cap. change (%) temperature ( c) ?0 0 5 10 ?0 ?0 ?0 0 20 40 60 80 100 120 140 ?5 ?0 -5 15 20 n impedance - frequency characteristics grm series (c0g char. 250v) 10k 1k 10 100 1 100m 1m 10m 100m 10g 1g frequency (hz) z ( ) 10pf 100pf 47pf 22pf grm series (c0g char. 630v) 10k 100k 1k 10 100 1 100m 1m 10m 100m 10g 1g frequency (hz) z ( ) 100pf 1000pf 470pf 47pf 10pf continued on the following page. grm series (c0g char. 1kv) 100m 1 10 100 1k 10k 10pf 47pf 100pf 22pf 100k 1m 10m 100m 1g 10g frequency (hz) z ( ) grm series (x7r char. 250v) 1k 100 10 1 100m 10m 1m 10m 100m 1g frequency (hz) z ( ) 1000pf 10000pf 100000pf for general purpose grm/grj series only for applications ac250v type ga2 series safety standard certified ga3 series product information reference data ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
grm/grj/gr4/gr7/ga2/ga3 series reference data (typical example) 201 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. continued from the preceding page. n impedance - frequency characteristics grm series (x7r char. 630v) 1k 100 10 1 100m 10m 1m 10m 100m 1g frequency (hz) z ( ) 1000pf 10000pf 100000pf grj series (x7r char. 250v) 0.01 0.1 1 10 100 1m 10m 100m 1g frequency (hz) (1) grj21ar72e102kwj1d (2) grj21br72e103kwj3l (3) grj31br72e223kwj1l (4) grj31cr72e473kwj3l (5) grj31cr72e104kwj3l (6) grj55dr72e105kwj1l z ( ) (3) (4) (5) (6) (2) (1) grj series (x7r char. 630v) (1) grj31br72j102kwj1l (2) grj31br72j222kwj1l (3) grj31br72j472kwj1l (4) grj31br72j103kwj1l (5) grj32qr72j223kwj1l (6) grj32dr72j473kwj1l (7) grj43dr72j104kwj1l (8) grj55dr72j224kwj1l 0.01 0.1 1 10 100 (1) (2) (3) (4) (5) (6) (7) (8) 1m 10m 100m 1g frequency (hz) z ( ) gr4 series 1k 100 10 1 100m 10m 1m 10m 100m 1g frequency (hz) z ( ) 100pf 1000pf 4700pf continued on the following page. ga2 series z ( ) frequency (hz) 10m 10 1m 10m 100m 1g 1 100 1k 100m 10000pf 1000pf 100000pf ga3 series (type gf) 1k 100 10 1 100m 10m 1m 10m 100m 1g frequency (hz) z ( ) 1000pf 2200pf ga3 series (type gd) 1k 100 10 1 100m 10m 1m 10m 100m 1g frequency (hz) z ( ) 150pf 1000pf 2200pf ga3 series (type gb) 0.01 0.1 1 10 100 1m 10m 100m 1g frequency (hz) z ( ) 33000pf 10000pf 56000pf for general purpose grm/grj series only for applications ac250v type ga2 series safety standard certified ga3 series product information reference data ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
grm/grj/gr4/gr7/ga2/ga3 series reference data (typical example) 202 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. continued from the preceding page. n capacitance - ac voltage characteristics ga3 series (type gf/gd, x7r char.) -60 -40 -20 0 20 40 60 0 100 200 300 400 500 ac voltage [v(r.m.s.)] cap. change (%) at room condition (25 c) ga3 series (type gb) at room condition (25 c) -60 -40 -20 0 20 40 60 0 200 400 600 800 1000 ac voltage [v(r.m.s.)] cap. change (%) 10000pf 33000pf 56000pf n capacitance - dc bias characteristics gr7 series gr721aw0bb103kw01d gr721aw0bb153kw01d gr721bw0bb223kw03l gr731aw0bb223kw01d gr721bw0bb273kw03l gr731aw0bb273kw01d gr731aw0bb333kw01d gr731aw0bb103kw01d gr731aw0bb153kw01d gr731bw0bb223kw01l gr731bw0bb333kw01l gr731cw0bb473kw03l -100 -80 -60 -40 -20 0 20 0 50 100 150 200 250 300 350 dc bias (v) (1) (2) (2) (1) cap. change (%) for general purpose grm/grj series only for applications ac250v type ga2 series safety standard certified ga3 series product information reference data ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
taping is the standard packaging method. part number dimensions (mm) wt ?80mm reel paper tape embossed tape l quantity (pcs.) medium voltage ac250v safety std. certification grm18 grj21/grm21/gr721 grj31/grm31/gr731 grj32/grm32 grm42/gr442 grj43/grm43/gr443 grj55/grm55/gr455 ga242 ga243 ga255 ga342 ga343 ga352 ga355 1.6 2.0 3.2 3.2 4.5 4.5 5.7 4.5 4.5 5.7 4.5 4.5 5.7 5.7 0.8 1.25 1.6 2.5 2.0 3.2 5.0 2.0 3.2 5.0 2.0 3.2 2.8 5.0 0.8 1.0 1.25 1.0 1.25 1.6 1.0 1.25 1.5 2.0 1.0 1.5 1.5 2.0 2.5 2.0 1.5 1.5 2.0 2.0 1.0 1.5 2.0 1.5 2.0 1.5 1.5 2.0 2.5 2.7 2.9 4,000 4,000 - 4,000 - - 4,000 - - - - - - - - - - - - - - - - - - - - - - - - - - 3,000 - 3,000 2,000 - 3,000 2,000 1,000 3,000 2,000 1,000 1,000 500 1,000 2,000 1,000 1,000 1,000 3,000 2,000 2,000 1,000 1,000 1,000 1,000 1,000 500 500 500 c minimum quantity guide c tape carrier packaging (1) appearance of taping q embossed tape w paper tape top tape: 0.05mm in thickness sprocket hole: as specified in (2) cavity for chip: as specified in (2) base tape: as specified in (2) bottom tape: 0.05mm in thickness chip packed chips cover tape: 0.06mm in thickness sprocket hole: as specified in (2) cavity for chip: as specified in (2) base tape: as specified in (2) chip packed chips continued on the following page. package 203 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. for general purpose grm/grj series only for applications ac250v type ga2 series safety standard certified ga3 series product information package ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
(2) dimensions of tape q embossed tape w paper tape (3) dimensions of reel 8mm width, 4mm pitch tape 8mm width, 4mm pitch tape 12mm width, 8mm/4mm pitch tape a* part number a* part number b* grj21/grm21/gr721 (t u 1.25mm) 1.45 2.25 grj31/grm31/gr731 (t u 1.25mm) 2.0 3.6 grj32/grm32 (t u 1.25mm) 2.9 3.6 b* 2.5 5.1 3.6 4.9 3.2 6.1 grm42/gr442/ga242/ga342 grj43/grm43/gr443/ga243/ga343 ga352 grj55/grm55/gr455/ga255/ga355 5.4 *1 4.0 0.1mm in case of grm42/gr442/ga242/ga342 6.1 *nominal value *nominal value a* part number b* grj21/grm21/gr721 (t = 1.0mm) 1.45 2.25 grm18 1.05 1.85 grm31/gr731 (t = 1.0mm) 2.0 3.6 grm32 (t = 1.0mm) 2.9 3.6 *nominal value (in mm) (in mm) (in mm) 4.0 t 0.1 4.0 t 0.05 1.75 t 0.1 8.0 t 0.3 direction of feed a b 2.0 t 0.05 0.25 t 0.1 2.5 max. 3.5 t 0.05 ?1.5 w 0.1 y 0 8.0 t 0.1 * 1 4.0 t 0.1 1.75 t 0.1 12.0 t 0.3 direction of feed 5.5 t 0.05 2.0 t 0.05 0.3 t 0.1 3.7 max. b a ?1.5 w 0.1 y 0 4.0 t 0.1 ?1.5 w 0.1 y 0 4.0 t 0.1 1.75 t 0.1 1.1 max. 8.0 t 0.3 direction of feed a b 3.5 t 0.05 2.0 t 0.05 2.0 t 0.5 9.0 (tape width 8mm) 13.0 (tape width 12mm) ?13 t 0.2 ?21 t 0.8 60 +1 - 0 - 1.5 180 +0 - 0 +1.0 - 0 +1.0 continued from the preceding page. continued on the following page. 13.0 t 1.0 (tape width 8mm) 17.0 t 1.0 (tape width 12mm) package 204 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. for general purpose grm/grj series only for applications ac250v type ga2 series safety standard certified ga3 series product information package ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
(4) taping method q tapes for capacitors are wound clockwise. the sprocket holes are to the right as the tape is pulled toward the user. w part of the leader and part of the empty tape should be attached to the end of the tape as shown at right. e the top tape or cover tape and base tape are not attached at the end of the tape for a minimum of 5 pitches. r missing capacitors number within 0.1% of the number per reel or 1 pc, whichever is greater, and are not continuous. t the top tape or cover tape and bottom tape should not protrude beyond the edges of the tape and should not cover sprocket holes. y cumulative tolerance of sprocket holes, 10 pitches: t 0.3mm. u peeling off force: 0.1 to 0.6n in the direction shown at right. (in mm) 165 to 180 ? base tape top tape or cover tape direction of feed 160 min. 190 min. (top tape or cover tape alone) vacant section chip mounting unit vacant section 210 min. continued from the preceding page. package 205 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. for general purpose grm/grj series only for applications ac250v type ga2 series safety standard certified ga3 series product information package ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
! caution 206 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. n storage and operating conditions n handling 1. vibration and impact do not expose a capacitor to excessive shock or vibration during use. 2. do not directly touch the chip capacitor, especially the ceramic body. residue from hands/fingers may create a short circuit environment. failure to follow the above cautions may result, worst case, in a short circuit and cause fuming or partial dispersion when the product is used. operating and storage environment do not use or store capacitors in a corrosive atmosphere, especially where chloride gas, sulfide gas, acid, alkali, salt or the like are present. in addition, avoid exposure to moisture. before cleaning, bonding or molding this product, verify that these processes do not affect product quality by testing the performance of a cleaned, bonded or molded product in the intended equipment. store the capacitors where the temperature and relative humidity do not exceed 5 to 40 degrees centigrade and 20 to 70%. use capacitors within 6 months of delivery. check the solderability after 6 months or more. failure to follow the above cautions may result, worst case, in a short circuit and cause fuming or partial dispersion when the product is used. for general purpose grm/grj series only for applications ac250v type ga2 series safety standard certified ga3 series product information ! caution ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
when dc-rated capacitors are to be used in ac or ripple current circuits, be sure to maintain the vp-p value of the applied voltage or the vo-p which contains dc bias within the rated voltage range. when the voltage is applied to the circuit, starting or stopping may generate irregular voltage for a transit period because of resonance or switching. be sure to use a capacitor with a rated voltage range that includes these irregular voltages. when dc-rated capacitors are to be used in input circuits from a commercial power source (ac filter), be sure to use safety certified capacitors because various regulations for withstanding voltage or impulses, established for all equipment, should be taken into consideration. voltage positional measurement dc voltage dc+ac voltage ac voltage pulse voltage (1) pulse voltage (2) v 0 -p v 0 -p vp-p vp-p vp-p 1. operating voltage 2. operating temperature, self-generated heat, and load reduction at high-frequency voltage condition continued on the following page. keep the surface temperature of a capacitor below the upper limit of its rated operating temperature range. be sure to take into account the heat generated by the capacitor itself. when the capacitor is used in a high- frequency voltage, pulse voltage, it may self-generate heat due to dielectric loss. applied voltage should be the load such as self- generated heat is within 20 c on the condition of atmosphere temperature 25 c. when measuring, use a thermocouple of small thermal capacity -k of ?.1mm in conditions where the capacitor is not affected by radiant heat from other components or surrounding ambient fluctuations. excessive heat may lead to deterioration of the capacitor's characteristics and reliability. (never attempt to perform measurement with the cooling fan running. otherwise, accurate measurement cannot be ensured.) (1) in the case of x7r char. n caution (rating) ! caution 207 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. for general purpose grm/grj series only for applications ac250v type ga2 series safety standard certified ga3 series product information ! caution ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
due to the low self-heating characteristics of low- dissipation capacitors, the allowable electric power of these capacitors is generally much higher than that of x7r characteristic capacitors. when a high frequency voltage that causes 20 c self- heating to the capacitor is applied, it will exceed the capacitor's allowable electric power. the frequency of the applied sine wave voltage should be less than 500khz (less than 100khz in the case of rated voltage: dc3.15kv). the applied voltage should be less than the value shown in figure below. in the case of non-sine wave that includes a harmonic frequency, please contact our sales representatives or product engineers. excessive heat may lead to deterioration of the capacitor's characteristics and reliability. (never attempt to perform measurement with the cooling fan running. otherwise, accurate measurement cannot be ensured.) the capacitors less than 22pf can be applied maximum 4.0kv peak to peak at 100khz or less only for the ballast or the resonance usage in the lcd backlight inverter circuit. we are also offering free software/the capacitor selection tool: "murata medium voltage capacitors selection tool by voltage form," which will assist you in selecting a suitable capacitor. the software can be downloaded from murata's website. (http://www.murata.com/designlib/mmcsv/index.html). by inputting capacitance values and the applied voltage waveform of the specific capacitor series, this software will calculate the capacitor's power consumption and list suitable capacitors (non-sine wave is also available). (2) in case of c0g, u2j char. c0g char., rated voltage: dc1kv frequency [khz] 1000 100 10 1 100 (1000) allowable voltage [vp-p] 10000 c0g char., rated voltage: dc3.15kv frequency [khz] 1000 100 10 1 1000 (3150) allowable voltage [vp-p] 10000 27 to 47pf to 22pf continued from the preceding page. the sine-wave frequency vs allowable voltage the temperature of the surface of capacitor: 125?c or less (including self-heating) u2j char., rated voltage: dc3.15kv frequency [khz] allowable voltage [vp-p] 1000 100 10 1 1000 (3150) 10000 u2j char., rated voltage: dc630v frequency [khz] 1000 (500) 100 10 1 100 (630) allowable voltage [vp-p] 1000 to 680pf 1,000pf to 33pf 47pf 100pf 100 1000 10000 to 470pf u2j char., rated voltage: dc1kv allowable voltage [vp-p] frequency [khz] 1000 (500) 100 10 1 100 1000 10000 u2j char., rated voltage: dc2kv allowable voltage [vp-p] frequency [khz] 1000 (500) 100 10 1 to 100pf 150pf 220pf 2,200pf u2j char., rated voltage: dc250v frequency [khz] 1000 (500) 100 10 1 100 (250) allowable voltage [vp-p] 1000 to 4,700pf 10,000pf continued on the following page. c0g char., rated voltage: dc250v frequency [khz] 100 (250) allowable voltage [vp-p] 1000 c0g char., rated voltage: dc630v frequency [khz] 1000 100 10 1 100 (630) allowable voltage [vp-p] 1000 1000 100 10 1 to 470pf 1000pf 680pf 560pf 820pf to 100pf to 100pf ! caution 208 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. for general purpose grm/grj series only for applications ac250v type ga2 series safety standard certified ga3 series product information ! caution ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
tests for ac withstanding voltage should be made with equipment capable of creating a wave similar to a 50/60 hz sine wave. if the distorted sine wave or overload exceeding the specified voltage value is applied, a defect may be caused. 4. test condition for ac withstanding voltage (1) test equipment the capacitor's leads or terminals should be firmly connected to the output of the withstanding voltage test equipment, and then the voltage should be raised from near zero to the test voltage. if the test voltage is applied directly to the capacitor without raising it from near zero, it should be applied with the zero cross.* at the end of the test time, the test voltage should be reduced to near zero, and then the capacitor's leads or terminals should be taken off the output of the withstanding voltage test equipment. if the test voltage is applied directly to the capacitor without raising it from near zero, surge voltage may occur and cause a defect. *zero cross is the point where voltage sine wave passes 0v. - see the figure at right - (2) voltage applied method 0v zero cross voltage sine wave continued from the preceding page. failure of a capacitor may result in a short circuit. be sure to provide an appropriate fail-safe function such as a fuse on your product to help eliminate possible electric shock, fire, or fumes. please consider using fuses on each ac line if the capacitors are used between the ac input lines and earth (line bypass capacitors), to prepare for the worst case, such as a short circuit. failure to follow the above cautions may result, worst case, in a short circuit and cause fuming or partial dispersion when the product is used. 3. fail-safe ac in fuse ! caution 209 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. for general purpose grm/grj series only for applications ac250v type ga2 series safety standard certified ga3 series product information ! caution ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
[chip mounting close to board separation point] a b d c perforation slit locate chip horizontal to the direction in which stress acts. chip arrangement worst a g c g b~d best [component direction] caution (soldering and mounting) 1. vibration and impact do not expose a capacitor to excessive shock or vibration during use. 2. circuit board material it is possible for the chip to crack by the expansion and shrinkage of a metal board. please contact us if you want to use our ceramic capacitors on a metal board such as aluminum. 3. land layout for cropping pc board choose a mounting position that minimizes the stress imposed on the chip during flexing or bending of the board. continued on the following page. ! caution 210 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. for general purpose grm/grj series only for applications ac250v type ga2 series safety standard certified ga3 series product information ! caution ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
4. reflow soldering when components are exposed to sudden heat, their mechanical strength can be decreased due to the extreme temperature changes which can cause flexing and result in internal mechanical damage, which will cause the parts to fail. in order to prevent mechanical damage, preheating is required for both the components and the pcb board. preheating conditions are shown in table 1. it is required to keep the temperature differential between the soldering and the components surface ( t) as small as possible. solderability of tin plating termination chips might be deteriorated when low temperature soldering profile where peak solder temperature is below the tin melting point is used. please confirm the solderability of tin plating termination chips before use. when components are immersed in solvent after mounting, be sure to maintain the temperature difference ( t) between the component and solvent within the range shown in the table 1. g -- 18/21/31 g -- 32/42/43/52/55 ? t v 190 d ? t v 130 d part number temperature differential table 1 recommended conditions [standard conditions for reflow soldering] [allowable soldering temperature and time] in the case of repeated soldering, the accumulated soldering time must be within the range shown above. soldering time (sec.) 260 270 250 240 230 0306090 soldering temperature ( d ) inverting the pcb make sure not to impose an abnormal mechanical shock on the pcb. continued from the preceding page. peak temperature atmosphere pb-sn solder infrared reflow 230-250 c air vapor reflow 230-240 c air lead free solder 240-260 c air or n 2 infrared reflow vapor reflow 60-120 seconds 30-60 seconds d t gradual cooling soldering preheating 200 ? c 170 ? c 150 ? c 130 ? c time temperature ( d ) peak temperature 60-120 seconds 20 seconds max. d t gradual cooling soldering preheating 170 ? c 150 ? c 130 ? c time temperature ( d ) peak temperature pb-sn solder: sn-37pb lead free solder: sn-3.0ag-0.5cu continued on the following page. optimum solder amount for reflow soldering overly thick application of solder paste results in excessive solder fillet height. this makes the chip more susceptible to mechanical and thermal stress on the board and may cause cracked chips. too little solder paste results in a lack of adhesive strength on the outer electrode, which may result in chips breaking loose from the pcb. make sure the solder has been applied smoothly to the end surface to a height of 0.2mm min. [optimum solder amount for reflow soldering] 0.2mm min. in section ! caution 211 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. for general purpose grm/grj series only for applications ac250v type ga2 series safety standard certified ga3 series product information ! caution ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
the top of the solder fillet should be lower than the thickness of components. if the solder amount is excessively large, the risk of cracking is higher during board bending or under any other stressful conditions. continued from the preceding page. optimum solder amount for flow soldering 5. flow soldering when components are exposed to sudden heat, their mechanical strength can be decreased due to the extreme temperature changes which can cause flexing and result in internal mechanical damage, which will cause the parts to fail. additionally, an excessively long soldering time or high soldering temperature results in leaching by the outer electrodes, causing poor adhesion or a reduction in capacitance value due to loss of contact between electrodes and end termination. in order to prevent mechanical damage, preheating is required for both the components and the pcb board. preheating conditions are shown in table 2. it is required to keep temperature differential between the soldering and the components surface ( t) as small as possible. when components are immersed in solvent after mounting, be sure to maintain the temperature difference between the component and solvent within the range shown in table 2. do not apply flow soldering to chips not listed in table 2. g -- 18/21/31 ? t v 150 d part number temperature differential table 2 [standard conditions for flow soldering] [allowable soldering temperature and time] in the case of repeated soldering, the accumulated soldering time must be within the range shown above. soldering time (sec.) 260 270 250 240 230 0102030 soldering temperature ( d ) up to chip thickness adhesive recommended conditions peak temperature atmosphere pb-sn solder 240-250 c air lead free solder 250-260 c n 2 60-120 seconds 5 seconds max. d t gradual cooling soldering preheating 170 ? c 150 ? c 130 ? c time temperature ( d ) peak temperature pb-sn solder: sn-37pb lead free solder: sn-3.0ag-0.5cu continued on the following page. in section ! caution 212 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. for general purpose grm/grj series only for applications ac250v type ga2 series safety standard certified ga3 series product information ! caution ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
optimum solder amount when re-working using a soldering iron solder amount 6. correction with a soldering iron when sudden heat is applied to the components by use of a soldering iron, the mechanical strength of the components will decrease because the extreme temperature change causes deformations inside the components. in order to prevent mechanical damage to the components, preheating is required for both the components and the pcb board. preheating conditions, (the "temperature of the soldering iron tip", "preheating temperature," "temperature differential" between iron tip and the components and the pcb), should be within the conditions of table 3. it is required to keep the temperature differential between the soldering iron and the component's surface ( d t) as small as possible. after soldering, do not allow the component/pcb to cool down rapidly. the operating time for the re-working should be as short as possible. when re-working time is too long, it may cause solder leaching, in turn causing a reduction of the adhesive strength of the terminations. g -- 18/21/31 g -- 32/42/43/ 52/55 ? t v 190 d ? t v 130 d part number temperature differential ( d t) table 3 continued from the preceding page. 7. washing excessive output of ultrasonic oscillation during cleaning causes pcbs to resonate, resulting in cracked chips or broken solder. take note not to vibrate pcbs. failure to follow the above cautions may result, worst case, in a short circuit and fuming when the product is used. air air atmosphere 150 c min. 150 c min. preheating temperature 350 c max. 280 c max. temperature of soldering iron tip *applicable for both pb-sn and lead free solder. pb-sn solder: sn-37pb lead free solder: sn-3.0ag-0.5cu for sizes smaller than g pp 18, the top of the solder fillet should be lower than 2/3 of the thickness of the component or 0.5mm whichever is smaller. for sizes larger than g pp 21, the top of the solder fillet should be lower than 2/3 of the thickness of the component. if the solder amount is excessive, the risk of cracking is higher during board bending or under any other stressful conditions. a soldering iron ?3mm or smaller should be used. it is also necessary to keep the soldering iron from touching the components during the re-work. solder wire with ?0.5mm or smaller is required for soldering. in section ! caution 213 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. for general purpose grm/grj series only for applications ac250v type ga2 series safety standard certified ga3 series product information ! caution ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
1. construction of board pattern after installing chips, if solder is excessively applied to the circuit board, mechanical stress will cause destruction resistance characteristics to lower. to prevent this, be extremely careful in determining shape and dimension before designing the circuit board diagram. construction and dimensions of pattern (example) flow soldering : 3.2 g 1.6 or less available. l g wa b c 2.0 g 1.25 1.0-1.2 0.9-1.0 0.8-1.1 1.6 g 0.8 0.6-1.0 0.8-0.9 0.6-0.8 2.2-2.6 1.0-1.1 1.0-1.4 3.2 g 1.6 flow soldering l g wa b c 2.0 g 1.25 1.0-1.2 0.6-0.7 0.8-1.1 2.2-2.4 0.8-0.9 1.0-1.4 1.6 g 0.8 0.6-0.8 0.6-0.7 0.6-0.8 3.2 g 1.6 2.0-2.4 1.0-1.2 1.8-2.3 3.2 g 2.5 2.8-3.4 1.2-1.4 1.4-1.8 4.5 g 2.0 2.8-3.4 1.2-1.4 2.3-3.0 4.5 g 3.2 4.0-4.6 1.4-1.6 2.1-2.6 5.7 g 2.8 4.0-4.6 1.4-1.6 3.5-4.8 (in mm) 5.7 g 5.0 reflow soldering land chip capacitor c solder resist a b l w dimensions of slit (example) preparing the slit helps flux cleaning and resin coating on the back of the capacitor. however, the length of the slit design should be as short as possible to prevent mechanical damage in the capacitor. a longer slit design might receive more severe mechanical stress from the pcb. recommended slit design is shown in the table. l g wd e 2.0 g 1.25 - 1.0-2.0 - 1.6 g 0.8 - - 3.2-3.7 3.2 g 1.6 1.0-2.0 4.1-4.6 3.2 g 2.5 1.0-2.8 3.6-4.1 4.5 g 2.0 1.0-2.8 4.8-5.3 4.5 g 3.2 1.0-4.0 4.4-4.9 5.7 g 2.8 1.0-4.0 6.6-7.1 (in mm) 5.7 g 5.0 land chip capacitor slit solder resist d e l w continued on the following page. notice (soldering and mounting) notice 214 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. for general purpose grm/grj series only for applications ac250v type ga2 series safety standard certified ga3 series product information notice ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
3. soldering (1) limit of losing effective area of the terminations and conditions needed for soldering. (2) flux application (3) solder a b c d termination continued from the preceding page. 2. mounting of chips mechanical shock of the chip placer when the positioning claws and pick-up nozzle are worn, the load is applied to the chip while positioning is concentrated in one position, thus causing cracks, breakage, faulty positioning accuracy, etc. careful checking and maintenance are necessary to prevent unexpected trouble. an excessively low bottom dead point of the suction nozzle imposes great force on the chip during mounting, causing cracked chips. please set the suction nozzle's bottom dead point on the upper surface of the board. thickness of adhesives applied keep thickness of adhesives applied (50-105 m or more) to reinforce the adhesive contact considering the thickness of the termination or capacitor (20-70 m) and the land pattern (30-35 m). continued on the following page. depending on the conditions of the soldering temperature and/or immersion (melting time), effective areas may be lost in some parts of the terminations. to prevent this, be careful in soldering so that any possible loss of the effective area on the terminations will securely remain at a maximum of 25% on all edge length a-b-c-d-a of part with a, b, c, d, shown in the figure below. an excessive amount of flux generates a large quantity of flux gas, causing deteriorated solderability. so apply flux thinly and evenly throughout. (a foaming system is generally used for flow soldering.) flux containing too high a percentage of halide may cause corrosion of the outer electrodes without sufficient cleaning. use flux with a halide content of 0.2% max. do not use strong acidic flux. do not use water-soluble flux.* (*water-soluble flux can be defined as non rosin type flux including wash-type flux and non-wash-type flux.) the use of sn-zn based solder will deteriorate the reliability of the mlcc. please contact our sales representative or product engineers on the use of sn-zn based solder in advance. in section in section in section in section in section in section land layout to prevent excessive solder mounting close to a chassis mounting with leaded components mounting leaded components later examples to be avoided examples of improvements by the land division lead wire connected to a part provided with lead wires. chassis solder (ground solder) adhesive base board land pattern d 1 soldering iron lead wire of component to be connected later. solder resist solder resist d 2 d 1 4. cleaning please confirm there is no problem in the reliability of the product beforehand when cleaning it with the intended equipment. the residue after cleaning it might cause a decrease in the surface resistance of the chip and the corrosion of the electrode part, etc. as a result it might cause reliability to deteriorate. please confirm beforehand that there is no problem with the intended equipment in ultrasonic cleansing. 5. resin coating please use it after confirming there is no influence on the product with the intended equipment before the resin coating and molding. a cracked chip might be caused at the cooling/heating cycle by the amount of resin spreading and/or bias thickness. the resin for coating and molding must be selected as the stress is small when stiffening and the hygroscopic is low as possible. continued from the preceding page. notice 216 ! note please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. n rating 1. capacitance change of capacitor (1) in the case of x7r char. capacitors have an aging characteristic, whereby the capacitor continually decreases its capacitance slightly if the capacitor is left on for a long time. moreover, capacitance might change greatly depending on the surrounding temperature or an applied voltage. therefore, it is not likely to be suitable for use in a time constant circuit. please contact us if you need detailed information. (2) in the case of any char. except x7r capacitance might change a little depending on the surrounding temperature or an applied voltage. please contact us if you intend to use this product in a strict time constant circuit. 2. performance check by equipment before using a capacitor, check that there is no problem in the equipment's performance and the specifications. generally speaking, class 2 (x7r char.) ceramic capacitors have voltage dependence characteristics and temperature dependence characteristics in capacitance. therefore, the capacitance value may change depending on the operating condition in the equipment. accordingly, be sure to confirm the apparatus performance of receiving influence in a capacitance value change of a capacitor, such as leakage current and noise suppression characteristics. moreover, check the surge-proof ability of a capacitor in the equipment, if needed, because the surge voltage may exceed the specific value by the inductance of the circuit. for general purpose grm/grj series only for applications ac250v type ga2 series safety standard certified ga3 series product information notice ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
! note ?please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. ?this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. iso 9001 certifications 217 plant fukui murata mfg. co., ltd. izumo murata mfg. co., ltd. okayama murata mfg. co., ltd. murata electronics singapore (pte.) ltd. wuxi murata electronics co., ltd. beijing murata electronics co., ltd. n qualified standards the products listed here have been produced by iso 9001 certified factory. ? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20
218 http://ds.murata.com/software/simsurfing/en-us/mlcc/ ! note ?please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. ?this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. ?this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, it? specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ?this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20

? this pdf catalog is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf catalog has only typical specifications because there is no space for detailed specifications. therefore, please app rove our product specifications or transact the approval sheet for product specifications before ordering. ! note c02e.pdf 10.12.20

▲Up To Search▲

Price & Availability of GRM1555C1H2R3WA01D

	To Download GRM1555C1H2R3WA01D Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .